Newmac Equipment

We have a Microcut 857 Turret Milling Machine for sale. Recently acquired from a Geelong TAFE. Microcut is manufactured by Buffalo Machinery (Taiwan), a well-regarded builder of machine tools known for solid construction and long service life.

Specifications
Table size: 1270mm x 255mm
Spindle speeds: 50  3750 rpm
Spindle taper: NT40
Motor: 5HP / 3.7kW
Power requirements: 3 phase, 415 volt
Overall dimensions: 1.7m x 1.5m x 2.2m high
Weight: Approx. 1.5 tonnes

Features & Accessories
X-axis Align power feed, plus table power rise
Easson 3-axis DRO (checked and working)
Coolant system included

Condition
This is an ex-TAFE training machine, presenting in good general order. The head is currently noisy and requires servicing  this will be carried out prior to sale, so the machine is supplied in proper working condition.

We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job before purchase.

This milling machine is in our warehouse so please feel free to call us for more information & price or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or having machinery surplus to requirements, we would appreciate the opportunity to assist in any way we can.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

MICROCUT 857 TURRET MILLING MACHINE

We have an Induma Universal milling machine for sale.

Stock # 4152

Specifications are as follows

Table size 1,070mm x 200mm
XYZ travel 600 / 250 / 500 mm approx
12 Spindle speeds 40 to 1600rpm
NT40 Spindle Taper
Spindle Motor  3.5HP
Power requirements 415 volt, 3 phase
Overall dimensions 1.4m x 1.7m x 1.7m High
Weight 1.5 Tonne
Features/Accessories

X and Y Power Feed
Arbor Support
Coolant system
Slotting attachment

We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment.

Are you considering selling your machinery?

We buy as well as sell machinery. Downsizing, relocating, closing down, or having surplus equipment. We are always on the lookout for quality machinery to buy. Please do not hesitate to contact us to discuss your machinery needs and how we can help you.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

INDUMA UNIVERSAL MILL

We have an Ex-TAFE, Microcut 857 Turret Milling Machine for sale, 

Stock # 4221

Microcut mills are manufactured in Taiwan by Buffalo Machinery, a well-established builder known worldwide for producing reliable, high-quality milling machines, lathes, and machining centres. This Microcut 857 turret mill is a robust, versatile machine presented in good working order and ready for immediate use.

Specifications
Table size: 1270mm x 255mm
Spindle speeds: 50  3750 rpm
Spindle taper: NT40
Motor: 5HP / 3.7kW
Voltage: 3 phase, 415V
Overall dimensions: 1.7m x 1.5m x 2.2m high
Weight: Approx. 1.5 tonnes

Features & Accessories
Power feeds to X & Y axis (Align brand)
Table power rise
Easson 3-axis DRO (checked and fully operational)
Coolant system fitted

Condition
No faults found  machine is in good working order.

We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment, knowing youre making a smart choice for your business.

Are you considering selling your machinery? We buy as well as sell machinery. Downsizing? relocating? closing down? or having surplus equipment. We are always on the lookout for quality machinery to buy. Please do not hesitate to contact us to discuss your machinery needs and how we can help you. Your success is our priority.

We want to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise customers to take out transport insurance with their usual insurance company.

Victoria (Elliott) Rapidmill U2/V2 Universal Milling Machine for sale

We have a good working-condition Victoria (Elliott) Rapidmill U2/V2 Universal Milling Machine available. These British-built mills are known for their solid castings, rigidity, and reliability, making them ideal for general machining, toolroom work, and heavy-duty milling operations.

Specifications

 Table size: 1220 mm x 295 mm
 XYZ travel: 750 mm (X), 203 mm (Y), 370 mm (Z)
 Power feeds: X, Y & Z
 Spindle speeds: 43  1500 rpm
 Spindle taper: NT40
 Motor: 4 HP / 3 kW
 Power: 415V, 3-phase
 Overall dimensions: 1600 mm x 1800 mm x 1700 mm high
 Approx. weight: 1.75 tonnes

Condition

The machine is in good working condition and has been run and checked in our workshop.
A solid, reliable universal mill suitable for a wide range of metalworking applications.

We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment.

Are you considering selling your machinery?

We buy as well as sell machinery. Downsizing, relocating, closing down, or having surplus equipment. We are always on the lookout for quality machinery to buy. Please do not hesitate to contact us to discuss your machinery needs and how we can help you.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

ELLIOT VICTORIA (ELLIOTT) RAPIDMILL U2/V2 UNIVERSAL MILLING MACHINE

We have a Bridgeport Turret Milling Machine for sale

Stock # 4151

This Bridgeport turret mill was manufactured in the UK by Adcock & Shipley & is in good used condition.

Specifications are as follows

Table size 42 (1067mm) x 9 (228mm)
Spindle Speeds 67 to 4600 rpm
Spindle taper turret R8
Spindle Motor 2.0hp
Power requirements 3 phase 415 volt
Dimensions for Transport 1.6m x 1.5m x 2m high
Weight 1.25 tons
Feature/comes with

Quill feed  not working
X axis power feed  fully operational;
The machine is being sold as is with no clock spring for the quill. There is also a handle missing from the end of the table.


We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment.

Are you considering selling your machinery?

We buy as well as sell machinery. Downsizing, relocating, closing down, or having surplus equipment. We are always on the lookout for quality machinery to buy. Please do not hesitate to contact us to discuss your machinery needs and how we can help you.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

BRIDGEPORT TURRET MILLING MACHINE

We have a Bridgeport Turret Milling Machine for sale

Stock # 4229

This Bridgeport turret mill was manufactured by Adcock & Shipley & is in good used condition.

Specifications are as follows

Table size 42 (1067mm) x 9 (228mm)
Spindle Speeds 67 to 2300 rpm
Spindle taper turret R8
Spindle Motor 2.0hp
Power requirements 3 phase 415 volt
Dimensions for Transport 1.6m x 1.5m x 2m high
Weight 1.25 tons

Feature/comes with

Slotting Attachment
X axis power feed  fully operational;

We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment.

Are you considering selling your machinery?

We buy as well as sell machinery. Downsizing, relocating, closing down, or having surplus equipment. We are always on the lookout for quality machinery to buy. Please do not hesitate to contact us to discuss your machinery needs and how we can help you.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

BRIDGEPORT R8 SPINDLE

We have a X6232 CX16 Universal milling machine for sale

Stock # 4118

Specifications are as follows

Table size 1600mm x 320mm
XYZ travels 800 x 240 x 300mm
Features power feeds on X,Y & Z axis
Vertical head spindle speeds 9 speeds 125 to 2000 rpm
Horizontal spindle speeds 30 to 1500 rpm
Spindle tapers vertical NT40, horizontal NT50
Motor Hp/Kw Vertical head motor 3.0kw, Horizontal 5.0kw
Machine Voltage 415 volt
Overall dimensions 2.1m x 2.3m x 1.9m high
Weight 3 tonnes
Comes with the following accessories

Coolant System
1 horizontal arbor
1 Arbor support
Dividing Head with power take off


We have run this machine and all is working, although it can be difficult to select & change feed rates. We have sold approximately 10 of these machines over the years & they have all been the same, so this is typical of these machines.

In addition to this  X6232 Universal milling machine, our warehouse proudly houses one of the largest inventories of used machinery in the country. We invite you to explore our , where we consistently update our stock, offering a great selection of engineering machinery and equipment for sale.

We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment.

Considering selling your machinery? We buy as well as sell machinery. Downsizing, relocating, closing down, or having surplus equipment. We are always on the lookout for quality machinery to buy. Please do not hesitate to contact us to discuss your machinery needs and how we can help you.

We would like to extend a note to all prospective customers. We are happy to provide freight quotes for machines to be shipped anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

CHANG ZHENG MACHINE TOOL WORKS X6232 CX16

We have a Zayer 55BM Universal Milling Machine for sale.

We have run this machine & all works well

Specifications are as follows
Table size 1.7m x 0.7m
XYZ travel 1.32m x 1.016m x 0.56m
Spindle Speeds 24 to 1685 rpm
Spindle taper NT50
Motor Hp/Kw 20.75/15.5
Machine Voltage 415 volt
Dimensions for Transport 1.9m x 2.3m x 2.1m high
Weight 6.2 tons

Accessories
Fagor 3 axis digital read out

In addition to this milling machine, our warehouse proudly houses one of the largest inventories of used machinery in the country. We invite you to explore our website, where we consistently update our stock, offering a great selection of engineering machinery and equipment for sale.

Please feel free to inspect machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment.

Considering selling your machinery? We buy as well as sell machinery. Downsizing, relocating, closing down, or having surplus equipment. We are always on the lookout for quality machinery to buy. Please do not hesitate to contact us to discuss your machinery needs and how we can help you.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

ZAYER 55BM UNIVERSAL MILLING MACHINE

We have a King Rich V 2000 Vertical turret milling machine for sale.

Stock # 4136

Specifications are as follows

Table size 1220mm x 250mm
XYZ travel 800 / 400 / 406 mm
Spindle speeds Low Range 60  500rpm  High Range 500  4200rpm
R8 Spindle
Motor Hp/Kw 3HP
Power requirements 415 volt, 3 phase
Overall dimensions 1.6m x 1.7m x 2.1m high
Weight 1.5 Tonne

Features/Accessories

Variable X-axis power feed
2 axis digital read out
Coolant system
Worklight

We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment.

Are you considering selling your machinery?

We buy as well as sell machinery. Downsizing, relocating, closing down, or having surplus equipment. We are always on the lookout for quality machinery to buy. Please do not hesitate to contact us to discuss your machinery needs and how we can help you.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

KING RICH V2000 TURRET MILLING MACHINE

We have in good condition a Spanish built Holke F10-V turret milling machine for sale.

Specifications are as follows

Table size 1120mm x 250mm
X/Y/Z travels 800/400/300mm approx
Power feed on X Axis
8 Spindle speeds 67 to 2300 rpm
Spindle taper NT30
Main motor 1.5kw
Machine voltage 415 volt
Dimensions for Transport 1.8m x 1.7m x 2.1m
Weight 1.5 Tonne
Click here for printable PDF & price

Comes with/Features

X axis power feed
Coolant system

Click here for a printable report & price

We have run this milling machine & all works well.

We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job prior to purchase.

This milling machine is in our warehouse so please feel free to call us for more information & price or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or have machinery that is surplus to requirements, we would appreciate the opportunity to assist in any way we can.

HOLKE F10-V

We have a Russian built Stankoimport 6P 82 III Universal milling machine for sale 

Stock # 4032

Specifications are as follows

Table size 1,250mm x 320mm
XYZ travels 800 x 240 x 410mm
Features power feeds on XY&Z axis
Vertical head spindle speeds 50 to 1600 rpm
Horizontal spindle speeds 31.5 to 1600 rpm
Spindle tapers vertical NT40, horizontal NT50
Horizontal Spindle Motor 7.5kw
Machine Voltage 415 volt
Overall dimensions 2,470 x 1,950 x 1,950mm (High)
Weight 3.3 tonnes

Comes with the following accessories

2 horizontal arbor supports
2 horizontal arbors
90 Degree Milling Head
NT50 to NT40 Spindle Adapter
NT 50 and NT 40 Toolholders


We have run this machine & all is working, although it can be difficult to select & change feed rates. We have sold approximately 10 of these machines over the years & they have all been the same, so this is typical of these machines.

In addition to this Universal milling machine, our warehouse proudly houses one of the largest inventories of used machinery in the country. We invite you to explore our website, where we consistently update our stock, offering a great selection of engineering machinery and equipment for sale.

We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment.

Considering selling your machinery? We buy as well as sell machinery. Downsizing, relocating, closing down, or having surplus equipment. We are always on the lookout for quality machinery to buy. Please do not hesitate to contact us to discuss your machinery needs and how we can help you.

We would like to extend a note to all prospective customers. We are happy to provide freight quotes for machines to be shipped anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

STANKOIMPORT 6P 82 III

Horizontal milling attachment for sale

Specifications are as follows
Suits turret milling machine with Ø86mm quill
See photo for approx. dovetail dimensions
Takes & fits NT40 tapper
Comes with 370mm long horizontal arbor
As new used condition

Designed for use on vertical (turret) milling machines where horizontal work is required. Simplifies right-angle work without the need for special tooling or complex fixtures.

We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job prior to purchase.

This horizontal milling attachment is in our warehouse so please feel free to call us for more information or pop in to inspect this equipment at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or having machinery that is surplus to requirements, we would appreciate the opportunity to assist in any way we can.

PACIFIC HORIZONTAL MILLING ATTACHMENT

Find Milling Machines For Sale from Newmac Equipment.

New & Used Milling Machines For Sale in Australia

Newmac Equipment

Sale Price

MICROCUT 857 TURRET MILLING MACHINE

INDUMA UNIVERSAL MILL

MICROCUT 857 TURRET MILLING MACHINE

ELLIOT VICTORIA (ELLIOTT) RAPIDMILL U2/V2 UNIVERSAL MILLING MACHINE

BRIDGEPORT TURRET MILLING MACHINE

BRIDGEPORT R8 SPINDLE

CHANG ZHENG MACHINE TOOL WORKS X6232 CX16

ZAYER 55BM UNIVERSAL MILLING MACHINE

KING RICH V2000 TURRET MILLING MACHINE

HOLKE F10-V

STANKOIMPORT 6P 82 III

PACIFIC HORIZONTAL MILLING ATTACHMENT

Newmac Equipment

Dealer Address