Newmac Equipment

We have an ex-education department Dashin Champion 2500VS Centre Lathe for sale.

This is a Taiwanese-built variable speed centre lathe, manufactured by Jesco. This example is fitted with a Carmar SW4000 two-axis digital readout, quick change toolpost, and the standard variable speed control system with constant surface speed (CSS) function, allowing the spindle to hold a consistent cutting speed as diameter changes during facing or taper work.

This used unit has come into Newmac in good working order and includes both the standard 3-jaw and 4-jaw chucks, fixed & travelling steadies

Specifications
Swing over bed: 390mm
Swing in gap: 610mm
Swing over cross-slide: 240mm
Distance between centres: 1250mm
Spindle bore: 55mm
Centre height: 190mm
Bed width: 270mm
Spindle nose: D1-6
Headstock spindle taper: MT6
Tailstock taper: MT4
Cross slide travel: 230mm
Compound slide travel: 120mm
Leadscrew type: metric
Metric cross feed: 0.02  0.5mm/rev
Metric longitudinal feed: 0.040  1.00mm/rev
Metric thread pitch range: 39 steps, 0.2  14mm
Imperial thread range: 45 steps, 2  72 TPI
Spindle speed: variable, 18  2500rpm (high/low range selector)
Motor power: 5.5kW / 7.5hp
Voltage: 415V
Nett weight: 1500kg (approx.)

Included with this machine
3-jaw and 4-jaw chucks
Quick change toolpost
Fixed & travelling steadies
Digital readout (Carmar SW4000)
Coolant system
Work light

Freight options
We are happy to provide freight quotes with a full delivery address

We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job before purchase.

This lathe machine is in our warehouse so please feel free to call us on  for more information & price or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or having machinery surplus to requirements, we would appreciate the opportunity to assist in any way we can.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

3 Phase Power  Please Note
This machine does not include a plug. When 3 phase machinery is decommissioned from industrial use, it is typically disconnected  from a switchboard by an electrician  meaning no plug is fitted, and in some cases the cable may also be absent.

As a machinery dealer, we are not electricians and are unable to supply or fit plugs. Buyers will need to arrange connection through a licensed electrician. This is no different to purchasing new 3-phase machinery, which also requires a licensed electrician for installation.

On occasion, a machine will arrive with a plug already fitted  in that case, it stays. For the same reason we dont fit plugs, we dont remove them either.

DASHIN CHAMPION 2500VS CENTRE LATHE

We have an excellent used condition, Kingsland 55XS Punch & Shear Ironworker for sale.

Stock# 4668

Hydraulic Two Man Operation 55 Tonne Capacity
Punch Diameter Capacity in mild steel 32 x 13mm/38 x 10mm
Angle Iron Capacity in mild steel at 90° 130 x 13mm
Angle Iron Capacity in mild steel at 45° 70 x 10mm
Round Bar Capacity in mild steel 45mm
Square Bar Capacity in mild steel 45mm
Shearing Capacity in mild steel plate 230mm x 20mm thick or 375mm x 10mm thick
Notching Capacity in mild steel 45mm x 90mm deep x 10mm thick
See photos of charts on machine

We have run this machine. All functions are working. This Ironworker is in our warehouse so please feel free to pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery, if you have machines surplus to requirements or you are closing down, please feel free to contact us here at Newmac Equipment.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

KINGSLAND 55XS

We have a Harrison Alpha 330 Plus  CNC Teach lathe for sale

Harrison lathes are manufactured in the UK and have been widely used in training facilities and general engineering workshops for many years. They are known for their straightforward operation and practical design.


The Alpha series combines manual operation with CNC capability. This machine is fitted with the Harrison Alpha conversational (teach-in) system along with a Fanuc 21TB control. The conversational system allows operators to create programs using a step-by-step input method, without requiring full G-code programming.

Specifications are as follows

Fanuc 21 TBControl
Spindle Nose D1-4 Camlock
Spindle speed range 0 to 3500 rpm
Main motor HP/KW 7.5/10
Max Turning Dia 330mm
Max Turning length 1000mm
Hole through spindle 42mm
Supply voltage needed 415 volt
Overall dimensions Machine  2040mm x 1200mm x 1550mm High
Weight Machine approx 1200kgs
Year of Manufacture 1999

Accessories included

Quick Change Toolpost and tool holders
3 Jaw and 4 Jaw Chuck
Travelling Steady Rest

Features
Teach in Software
Coolant system
Worklight

We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment. We pride ourselves on providing exceptional customer service and believe that this personalized approach allows us to exceed your expectations.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

Considering selling your machinery?

We are always interested in purchasing metalworking machinery & surplus equipment, if you have one machine or a number of machines you need gone, please feel free contact us here at Newmac Equipment.

HARRISON ALPHA ALPHA 330 PLUS

We have a Colchester Triumph Electronic  CNC Teach lathe for sale

Stock # 4169

Specifications are as follows

Fanuc 20TControl
Spindle Nose D1-6 Camlock
Spindle speed range 13 to 2500 rpm
Main motor HP/KW 10/7.5
Max Turning Dia 400mm
Max Turning length 1180mm
Hole through spindle 54mm
Supply voltage needed 415 volt
Overall dimensions Machine  2600mm x 1500mm x 1670mm High
Weight Machine approx 3000kgs
Year of Manufacture 1996

Accessories included

Quick Change Toolpost and tool holders
3 Jaw Chuck
Features

Teach in Software
Coolant system
Worklight

We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment. We pride ourselves on providing exceptional customer service and believe that this personalized approach allows us to exceed your expectations.

We welcome any inquiries about the machine and invite you to contact us at

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

Considering selling your machinery?

We are always interested in purchasing metalworking machinery & surplus equipment, if you have one machine or a number of machines you need gone, please feel free contact us here at Newmac Equipment.

1996 COLCHESTER ELECTRONIC

We have an Ex School, used Woodfast CS300 Panel Saw for Sale

Stock # 4243

The Woodfast CS300 Panel Saw is a robust and dependable Australian-made woodworking machine, designed for accurate straight cutting of timber and sheet materials. Unlike larger sliding-table saws, this non-sliding table panel saw is compact and easy to operate, making it ideal for smaller workshops, schools, and light production facilities.

Built with a cast iron top and heavy-duty base, the Woodfast CS300 offers stability, durability, and reliable performance. If youre looking for a used panel saw for sale in Australia, the CS300 is a cost-effective solution that delivers precision and long service life.

Specifications
Make: Woodfast (Australia)
Model: CS300 Panel Saw
Blade Diameter: 300 mm
Table Type: Fixed, non-sliding, 740mm x 615mm
Overall dimensions: 800mm x 800mm x 1250mm high
Weight: Approx. 400kgs
Construction: Cast iron top with sturdy base
Suitable For: Sheet cutting, ripping, cross-cutting timber and boards
Condition: Used, workshop ready
Power requirements: 3-phase 415 volt

We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment.

Considering selling your machinery? We buy as well as sell machinery. Downsizing, relocating, closing down, or having surplus equipment. We are always on the lookout for quality machinery to buy. Please do not hesitate to contact us to discuss your machinery needs and how we can help you.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

WOODFAST CS300

We have a used condition Acra Shear 2.5m x 6mm  Fixed Rake Hydraulic Guillotine for sale.

Stock # 4267

Specifications

Mild steel capacity 2.5m x 6mm
Power requirements 3 phase, 415 volt
Overall dimensions (l x w x h) 2,870 mm x 1,640 mm x 1,800 mm
Weight 4.0 tons approx
Accessories/features

Manual back gauge

We have had this guillotine running & all works well

This guillotine is in our warehouse so please feel free to contact us or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery, if you have machines surplus to requirements or you are closing down, please feel free to contact us here at Newmac Equipment.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

ACRA SHEAR 2.5M X 6MM

SJ Hydraulic Surface Grinder for sale



Stock # 4235

Despite being a used machine its in good usable condition, ensuring that it can meet most grinding requirements. This machines robust construction makes it a valuable addition to any machining workshop. 

Specifications are as follows

Made in Denmark (We believe it could be a Jakobsen)
Table size 610mm x 200mm
Mag chuck mounting area 610mm x 200mm
Magnetic chuck size 610mm x 200mm
Max grinding wheel dia. 200mm
Power requirements, 3 phase 415 volt
Overall dimensions 1850mm x 1300mm x 1600 mm high
Weight 1.5 Tonne
Click here for a printable pdf report (opens in new tab)
This surface grinder is in our warehouse so please feel free to contact us or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery, if you have machines surplus to requirements or you are closing down, please feel free to contact us here at Newmac Equipment.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

JAKOBSEN SJ

Excellent used condition King Rich KR-B4V Vertical Machining Centre for sale.

This VMC presents in excellent condition overall. Prototrak CNC-controlled, offering a generous table and travel range, ready to go straight into production.

Specifications

Stock No 4694
Table size 355 x 1930 mm
X/Y/Z travel 1500 x 600 x 480 mm
Control type Prototrak VM 3-axis CNC
Max spindle speed 6000 RPM
Spindle taper ISO 40 / NT 40
Max table load Up to 850 kg
Spindle motor 5.5 kW (7.5 HP)
Machine voltage 415 V
Transport dimensions 2200 x 2400 x 2400 (h) mm
Weight 3,600 kg
Year of manufacture 2003
Coolant system Yes

Considering selling your machinery?
We are always interested in purchasing metalworking machinery & surplus equipment. If you have one machine or a number of machines you need gone, please feel free to contact us here at Newmac Equipment.

Please note this machine may or may not come with a plug. When 3 phase machinery is decommissioned from industrial use, it is often disconnected directly from a switchboard by an electrician, meaning no plug is fitted and in some cases the cable may also be absent. As a machinery dealer, we are not electricians and are unable to supply or fit plugs. Buyers will need to arrange connection through a licensed electrician.

This CNC Milling Machine is in our warehouse so please feel free to call us for more information & price or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or having machinery surplus to requirements, we would appreciate the opportunity to assist in any way we can.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

KING RICH KR-B4V WITH PROTOTRAK CNC-CONTROL

We have in good used Condition a Strands S68 Geared Head Drill for sale

Strands geared head drills are made in Rosenfors, Sweden, by Machinery Scandinavia AB, a manufacturer with more than 100 years of experience producing gear driven drilling machines, having produced over 700,000 units to date and holding over 80% market share across Scandinavia. They're well regarded in the trade for heavy cast construction and reliable gearboxes built to run hard for decades  the reason so many are still in daily use in workshops well past 25 years old. 

This example is a 1996-built S68 (serial no. 336000), in good used working order.

Specifications are as follows

Table size 500 x 350mm
Max Drill Size in Mild Steel 20mm
Distance from the centre of the spindle to the column 250mm
Distance from table to spindle nose, table fully down & head fully up 600mm
8 Spindle Speeds 100 to 2900rpm
Spindle taper Morse 3
Quill travel 140mm
Spindle Motor 1.1kw
Power requirements 415 volt
Dimensions for Transport 500 x 550 x 1,700mm (High)
Weight Approx. 200kgs

 We have run this geared head drill and all works well.

We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job prior to purchase.

This drilling machine is in our warehouse so please feel free to call us for more information & price or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or having machinery that is surplus to requirements, we would appreciate the opportunity to assist in any way we can.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

STRANDS S68

We have a CIG Transmig 275 Mig Welder  for sale

Specifications are as follows

275 Amp Max Welding Current 
Power requirements,  415 volt
Dimensions 1100 x 380 x 650mm High
Weight approx 80kgs

Comes with

Inbuilt wire feed unit
MIG gun
Earth wire
Gas regulator

In addition to this MIG welder, our warehouse proudly houses one of the largest inventories of used machinery in the country. We invite you to explore our website, where we consistently update our stock, offering a great selection of engineering machinery and equipment for sale.

We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment.

Considering selling your machinery? We buy as well as sell machinery. Downsizing, relocating, closing down, or having surplus equipment. We are always on the lookout for quality machinery to buy. Please do not hesitate to contact us to discuss your machinery needs and how we can help you.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

CIG TRANSMIG 275 MIG WELDER

A solid, well-proven hydraulic press brake ready to go straight into production. This machine has been run and tested in our workshop and operates well  foot pedal controlled with a motorised ballscrew backgauge (button control) for fast positioning.

Key specifications:
Nominal pressure: 63 tonnes
Length of work table: 2.5m
Distance between columns: 1850mm
Throat depth: 250mm
Ram stroke: 120mm
Maximum open height: 350mm
Backgauge travel: Approx 450mm (motorised ballscrew, button control)
Machine voltage: 415V
Overall dimensions: 2.55m x 1.6m x 2.2m high
Weight: approx. 4,200kg

Includes 
back gauge, top & bottom tooling as per photos

Built by the Shanghai Lifu Forging Press Machine Tool Factory, a well-established Chinese manufacturer of hydraulic press brakes and guillotines. This model suits general sheet metal fabrication work, with a table length and tonnage that covers most workshop bending jobs.

Currently set up and running in our Bayswater North warehouse  welcome to come in and see it working during business hours.

Freight options

We are happy to provide freight quotes with a full delivery address

3 Phase Power  Please Note
This machine does not include a plug. When 3 phase machinery is decommissioned from industrial use, it is typically disconnected  from a switchboard by an electrician  meaning no plug is fitted, and in some cases the cable may also be absent.

As a machinery dealer, we are not electricians and are unable to supply or fit plugs. Buyers will need to arrange connection through a licensed electrician. This is no different to purchasing new 3-phase machinery, which also requires a licensed electrician for installation.

On occasion, a machine will arrive with a plug already fitted  in that case, it stays. For the same reason we dont fit plugs, we dont remove them either.

We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job before purchase.

This hydraulic press brake folder is in our warehouse so please feel free to call us for more information & price or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or having machinery surplus to requirements, we would appreciate the opportunity to assist in any way we can.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

LF SHANGHAI LIFU WC67Y-63T HYDRAULIC PRESS BRAKE

We have a Lathe Taper Turning attachment for sale

Taper attachments are designed to enable lathes to accurately create tapered cuts in workpieces. By attaching this tool to your machine, you gain the ability to produce precise conical shapes. This type of machining is crucial in all industries like aerospace, automotive, and engineering.

Specifications

Lathe Taper Turning attachment still coated in rust proofing
Machine angle + or - 10º in 1º increments
Complete with Bed Clamp
Being sold as is

Price:$300.00 + GST Ex Works

We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job before purchase.

This Taper Turning Attachment is in our warehouse so please feel free to call us for more information & price or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or having machinery surplus to requirements, we would appreciate the opportunity to assist in any way we can.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

UNKNOWN TAPER

Newmac Equipment offer quality new and used listings for sale. Click here to search and view their latest stock list on tradeplantequipment.com.au

New & Used Plant and Equipment For Sale

Newmac Equipment

Sale Price

DASHIN CHAMPION 2500VS CENTRE LATHE

KINGSLAND 55XS

HARRISON ALPHA ALPHA 330 PLUS

1996 COLCHESTER ELECTRONIC

WOODFAST CS300

ACRA SHEAR 2.5M X 6MM

JAKOBSEN SJ

KING RICH KR-B4V WITH PROTOTRAK CNC-CONTROL

STRANDS S68

CIG TRANSMIG 275 MIG WELDER

LF SHANGHAI LIFU WC67Y-63T HYDRAULIC PRESS BRAKE

UNKNOWN TAPER

Newmac Equipment

Dealer Address