Newmac Equipment

We have a Makino V55 Vertical Machining Centre for sale.

Specifications are as follows

Travels, X axis 900mm, Y axis 500mm, Z axis 450mm
Distance from spindle nose to table 150  600mm
Spindle taper BT40
Spindle speeds 15 to 14,000 rpm
Table size 1000mm x 500mm
Max table load 700 kgs
Cutting feed rate 1 to 5000mm per min
Rapid traverse 5000mm per min
Floor space required 2.4m x 3.14m
Height 2.995m
Weight 9.3 tons
Control Fanuc Series 160MC
Year of manufacture 1997

Comes the following

chip conveyor
Spindle chiller
25 position tool carousel

We have run this Makino V55 VMC & all functions are working. This machine is located at our premises and can be seen under power .

For more information and price please feel free to give us a call

We are always interested in purchasing metalworking machinery & surplus equipment, if you are closing down or have a quantity of machines you need gone in a hurry, please feel free contact us here at Newmac Equipment

MAKINO V55 VERTICAL MACHINING CENTRE

We have a Colchester Mascot 1600 centre lathe for sale.

Specifications are as follows:

Swing over the bed 433mm
Swing over the saddle 267mm
Swing in gap 711mm
Distance between centres 1.5m
Spindle bore 76mm
Spindle nose D1-8
Main motor 12.5HP (9.3KW)
Overall dimensions 3m x 1.1m x 1.6m high
Weight 2.3 ton
Comes with the following accessories:

3 & 4 jaw chucks
Face plate
Jenix 2 axis digital read out
Fixed & traveling steadies
For customers who wish to pay us a visit, we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job prior to purchase.

This centre lathe is in our warehouse so please feel free to call us for more information & price or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment, if you have one machine or a quantity of machines you need gone, please feel free contact us here at Newmac Equipment

COLCHESTER MASCOT 1600 CENTRE LATHE

We have an LNS Eco Load Short Magazine Barfeed for sale. The barfeed is in as new condition, having only been used once or twice.

General Specifications

Overall Capacity 2-5/8 x 60
Siemens TD200 DRO Push Button Control
Pendant Control
The barfeed unit retracts on linear rails to facilitate changes in spindle liner 
Overall dimensions 1.8m x 1.1m x 1.5m high
Weight  appox 450kgs

This LNS Eco Load Short Magazine Barfeed is in our warehouse so please feel free to call us for more information or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment, if you have one machine or a quantity of machines you want to sell, please feel free to give us a ring.

LNS CNC ECO LOAD BARFEEDER

Mikron VPC 600 vertical machining centre for sale.

Specifications are as follows

XYZ travels X axis 600mm, Y axis 450mm, Z axis 450mm
Table size 850mm x 530mm
Spindle HSK-63A
Spindle speeds 100 to 20,000 rpm
30 position tool magazine
Control Heidenhain TNC426M
Comes with spindle chiller
Year of manufacture 2002
Dimensions for transport, width 2350mm x depth 2820mm x height 2845mm
Weight 6.5 tons

We have run this Mikron VPC 600 CNC Vertical Machining Centre & all functions are working. This CNC machine is located at our premises and can be seen under power .

For more information and price please call 

We are always interested in purchasing metalworking machinery & surplus equipment, if you are closing down or have a quantity of machines you need gone in a hurry, please feel free contact us here at Newmac Equipment

MIKRON VCP 600 VMC

We have an excellent used condition manual 1800mm x 2mm panbrake folder for sale.

Total length of folding area 1830mm

Max sheet folding capacity 2mm mild steel

For customers who wish to pay us a visit, we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job prior to purchase.

Please feel free to call us for more information & price or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment, if you have one machine or a quantity of machines you need gone, please feel free contact us here at Newmac Equipment.

PANBRAKE FOLDER 1800MM X 2MM

We have a good used condition, Brobo Waldown 200mm HD pedestal grinder for sale. 

This machine is in our warehouse ready for inspection under power.

BROBO-WALDOWN 200MM HD

We have a TOS W100A Horizontal Borer for sale.

Specification

Diameter of Boring Spindle 100mm
ISO 50 Spindle Taper
Boring Spindle Travel 900mm
Height of boring spindle centreline over table 1,120mm
Max Facing Diameter 900mm
Spindle Speed Range 7.1 to 1,120rpm
No of Faceplate speed steps 16
Range of Faceplate Speeds 7.1 to 224rpm
Cross travel of table in X Axis 1,600mm
Longitudanal travel of table in Z(W) Axis 1,250mm
Working Surface of Table 1,250 x 1,250mm
Max Workpiece Weight 3,000kg
Main Drive Motor 11kw
Machine Weight 14 Tonne
Floor Space 6,710mm x 5,440mm
Testing of Machinery  Try Before You Buy

We are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job prior to purchase.

This machine is in a customers warehouse and we can arrange for you to inspect the machine at your convenience

We are always interested in purchasing metalworking machinery, if you have machines surplus to requirements or you are closing down, please feel free to contact us here at Newmac Equipment

TOS W100A

We have a good used condition Baronmax 3BV-III  Vertical Bed Type Milling Machine for sale.

Specifications are as follows

Table size 1520mm x 350mm
X/Y/Z travels approximately 970mm x 460mm x 475mm
Variable Speed Drive 5-2000rpm (approx)
Spindle NT40
Main Spindle motor 5hp
Machine voltage 3 phase 415 volt
Weight approximately 3.0 tonnes
Dimensions 1530m x 1600m x 2450m (L x W x H)

Features

Power feeds & rapid X/Y/Z Axis 
Coolant Pump
3 Axis DRO
Worklight

Testing of Machinery

We have test run this milling machine & all works well. For customers who wish to pay us a visit, we are happy to test run this machinery in our warehouse, that way it gives you peace of mind that the machine will do your job prior to purchase.

Please feel free to pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment, if you have one machine or a quantity of machines you want to sell, please feel free to give us a ring.

BARONMAX 3BV-III

We have a Servex Vertical Air Compressor for sale.

This compressor is in our warehouse so please feel free to call us for more information or pop in to inspect the machine at your convenience.

SERVEX AIR COMPRESSOR

We have an excellent used condition ex RMIT, CIG TRANSTIG 180, 415V tig welder for sale.

This TIG welder is in our warehouse so please feel free to call us for more information or pop in to inspect the welder at your convenience.

Newmac Equipment is a proudly Australian owned company founded in 1983, we supply many industries with quality second hand and new products, Please add us to your favourite sellers list and visit our store when looking for quality products. We have our own web site where we regularly update our stock & have lots more engineering machinery & equipment for sale. Just google Newmac Equipment & you will find us. Call us for more information, you can also welcome to pay us a visit at our Bayswater North warehouse, see details below.

Newmac Equipment Pty Ltd,
10 Stephenson Rd,
Bayswater North,
Victoria 3153,
Our regular opening hours are 
Monday to Friday 8.30 to 4.45pm.

CIG TRANSTIG 180

We have in good condition a Hafco Metal Master SG 820H Automatic Surface Grinder for sale

Automatic Hydraulic feed on X Axis
Manual  Feed Z and Y Axis
Table Travels X/Y/Z 580 x 220 x 250mm
200mm Diameter Grinding Wheel
Fine Pole Magnetic Chuck 400mm x 200mm
Spindle Motor 1.5hp/1.1kw
Build Date 2012
Machine Size 1700 x 1300 x 1800 (L x W x H)
Machine Weight 750kg
Work Light
Coolant System
Manual Oil Pump
We have run this machine. All functions are working. The surface grinder is in our warehouse so please feel free to pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery, if you have machines surplus to requirements or you are closing down, please feel free to contact us here at Newmac Equipment.

HAFCO METALMASTER SG-820H

We have high quality German made OWT AD 2090, 40 postion quick change tool post holders for sale. Will suit Swiss Multix A size tool posts, German AXA-Haase MA  size tool posts  & other 40 position tool post brands. As new condition.

OWT AD 2090 QUICK CHANGE TOOL HOLDER

Find Plant and Equipment For Sale. Browse 145 listings from Newmac Equipment.

New & Used Plant and Equipment For Sale

Newmac Equipment

Sale Price

MAKINO V55 VERTICAL MACHINING CENTRE

COLCHESTER MASCOT 1600 CENTRE LATHE

LNS CNC ECO LOAD BARFEEDER

MIKRON VCP 600 VMC

PANBRAKE FOLDER 1800MM X 2MM

BROBO-WALDOWN 200MM HD

TOS W100A

BARONMAX 3BV-III

SERVEX AIR COMPRESSOR

CIG TRANSTIG 180

HAFCO METALMASTER SG-820H

OWT AD 2090 QUICK CHANGE TOOL HOLDER

Newmac Equipment

Dealer Address