Newmac Equipment

We have an excellent used condition Ecoca EL 5110 CNC teach lathe for sale.

Specification are as follows:

Swing over the bed 510mm
Swing over the cross slide 305mm
Distance between centres 1000mm
Spindle nose D1-8
Spindle bore 80mm
Spindle speeds 20 to 2000 rpm
15HP Main spindle motor
Year of manufacture 1985
Comes with the following accessories:

3 Jaw chuck
4 position tool post
Mitsubishi Meldas 520A  CNC control

This machine is in our warehouse ready for inspection under power.

ECOCA EL 5110

HWC 110 Horizontal Borer for sale.

Stock # 3924

Specifications are as follows

Origin, Polish made
Max boring Dia. 600mm
Max length of hole 840mm
Max  facing Dia 1000mm
Max turning Dia 1000mm
Faceplate to stay 3000mm
Table size 1200mm x 1400mm
Boring stay bush Dia. 100mm
Longitudinal travel 1550mm
Cross  travel 1200mm
Vertical travel 1150mm
Spindle taper morse taper 6
Max weight on table 3 tons
Tailstock included
Origin Polish
Power requirements 3 phase 415 volt
Overall dimensions 6.8m x 2m x 3.6m high
Weight 26 tons
Please note an important consideration for this machine is the need to
excavate a hole in the foundation for the counterweight to go up & down in.

Please note that we are advertising this HWC horizontal borer on behalf of its owner, and it is now located in our warehouse. We are happy to arrange and recommend customers inspect the machine. This way, you can make an informed decision and feel confident in your investment.

Please dont hesitate to contact us if you have any questions.

Machine Inspection and Information

Feel free to call us for more information and price or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery and surplus equipment. If you are downsizing, relocating, closing down, or have machinery surplus to requirements, we would appreciate the opportunity to assist in any way we can.

Freight and Insurance Reminder

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment.

We strongly advise that customers speak with their usual insurance company to take out transport insurance.

DABROWSKA HWC 110 HORIZONTAL BORING MACHINE

We have for sale a FMB  Turbo 5-42 Magazine Barfeed  in good used condition.

General Specifications

Overall Capacity 5mm -42mm max bar diameter
3.2m Bar Length
Servo Motor control
Pneumatic front bearing clamping
Takes D Type Barfeed Collets (None supplied with the machine)
Overall dimensions 4,400mmm x 800mm x 1,300mm high
Machine Manual and Spare Parts List Available as PDF Files
Weight appox 1000kgs

This FMB Magazine Barfeeder is being sold on behalf of a customer as surplus to their requirements.

Please feel free to call us for more information and to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment, if you have one machine or a quantity of machines you want to sell, please feel free to give us a ring.

2002 FMB TURBO 5-42

We are pleased to offer in good used condition, an English Made Fimax 2408F Fine Pole Magnetic Chuck

Specifications/info

Flat Magnetic Chuck 609mm x 203mm x 63.5mm High

We have tested this chuck and it has good pull-down force.

FIMAX 2408F

We have a Pollard Corona Geared Head Drill for sale

Stock #4004

Specifications are as follows:

Table size 610mm Dia
Max drill size in mild steel 50mm
Distance from spindle to column 370mm
Spindle taper morse taper 4
Quill travel 200mm
Machine voltage, three phase 415 volt
5hp Spindle Motor
Overall dimensions 1500mm x 760mm x 3100mm high
Weight 2 Tonne approx

We have run this machine & all works well.

We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job prior to purchase.

This drilling machine is in our warehouse so please feel free to call us for more information & price or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or having machinery that is surplus to requirements, we would appreciate the opportunity to assist in any way we can.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

FREDERICK POLLARD CORONA

We have a JF23 60A, 60 ton, C frame power press for sale.

Specifications are as follows

Nominal Pressure 600KN
Slide Stroke 101.6mm
No. of Strokes per minute 100
Max. Shut Height 362mm
Die Height Adjustment 76mm
Throat Depth 279mm
Weight 5 tons

This press is new old stock & has never been used.

Features pneumatic friction clutch

This JF23 60A C frame Power Press is in our warehouse, please feel free to call us for more information or pop in to inspect the machine at your convenience.

Are you thinking of selling your used or surplus equipment? Looking at Downsizing, Relocating, Closing Down or have machinery that is surplus to requirements. We are always looking for machinery to buy,  so would appreciate the opportunity to assist in any way we can.

We are always interested in purchasing metalworking machinery, if you have machines surplus to requirements or you are closing down, please feel free to contact us here at Newmac Equipment

SERVIAN JF23 60A C FRAME POWER PRESS

We have a Takang TK 330 Lathe for sale

Stock # 4101

Specifications are as follows

Swing Over Bed 330mm
Swing Over Saddle 1600mm
Distance Btw Ctrs 800mm
Spindle Bore 42mm
Spindle mount D1-5 Camlock
Spindle Speeds 8 Speed 75 to 2000 rpm
Power requirements 3 phase, 415 volt
Spindle Motor 3hp
Overall dimensions 2.2m x 1.0m x 1.4m high
Approx. weight 2 tonnes
Accessories

3 & 4 Jaw chuck/Face Plate/Drive Dog Plate
Fixed Steady Rest (Without Clamp Plate)
Coolant System, can be heard running

We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job before purchase.

This Lathe is in our warehouse so please feel free to pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or having machinery surplus to requirements, we would appreciate the opportunity to assist in any way we can.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

TAKANG TK 330

We have a Iemca TS 560 61 P Magazine Barfeeder for sale.
Now on sale, price reduced from $5000+GST to $2500+GST

General Specifications

Max Bar Capacity 70mm
Magazine load 10-70mm Bar
Chain Feed with drive motor
6m Bar Length
Overall dimensions 8,300mmm x 700mm x 1,800mm high
Weight appox 1,500kgs
This Iemca Magazine Barfeeder is in our warehouse so please feel free to call us on  for more information & price or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment, if you have one machine or a quantity of machines you want to sell, please feel free to give us a ring.

IEMCA TS 560/61/P

We have a very good used condition, Sunderland model 27SDH gear planner for sale

Specification & info as follows:

The machine is very well equipped 
1. One head/slide for cutting Spur/single helical gears  max face width 380mm (15) / max pitch 1 DP (25 Mod)
a. For single helical gears the max. helical angle is + or  30 deg.
2. One head/slide for double helical gears  max face width 380mm (15) / max pitch 1.5 DP ( 16 Mod) / helical angle 30 deg.
3. Two cutter heads  single acting and double acting
4. Rim/work steady rests for cutting large diameter gears
5. Change gears  full set (approx. 60 gears)
6. Speed gears (for different cutting speeds)  5 sets
7. Cutting trips  5 or 6 for different length faces (up to 15 face)
8. 4 and 6 work arbours with bushes for outer work support
9. Operation manual and work charts (for spurs/helicals and double helical gears)

Machine serial number: BB471  it was built in the mid 1960s 

Please note this machine is not in our warehouse, but we are happy to arrange an appointment for inspection of the machine if required.

Please feel free to call us for more information

We are always interested in purchasing metalworking machinery & surplus equipment, if you have one machine or a quantity of machines you need gone, please feel free contact us here at Newmac Equipment.

SUNDERLAND NO.27 GEAR PLANNER

DYNAVAC VACUUM TANK VACUUM TANK

We have a good working condition, Mori Seiki SL 25 CNC lathe for sale

Model SL-25B/1000, see photos for full specifications.

Features 
C axis & live tooling

Accessories
Hydraulic bar feed unit

This 1989 machine has a total of 22370 machining hours, equating to an average of 12.5 hours of use each week.

For higher-resolution photos look up the machine on our own .  Newmac Equipment to find us.

We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job before purchase.

This CNC lathe is in our warehouse so please feel free to call us for more information & price or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or having machinery surplus to requirements, we would appreciate the opportunity to assist in any way we can.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

MORI SIKI SL 25 CNC LATHE

We have a  good used condition CIG Transarc Tradesman Arc Welding Machine for sale.

High Range 70  200 amps
Low Range 50  150 amps
Power requirements 415 volt, 3 phase
Click here for a printable (pdf) report & price, which will open in a new tab

We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job prior to purchase.

Please feel free to pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or having machinery that is surplus to requirements, we would appreciate the opportunity to assist in any way we can.

A note to all prospective customers. We are happy to get freight quotes anywhere in Australia or worldwide. If the sale of any machine goes ahead, please note the machines are not insured during transport by either the transport companies or Newmac Equipment. It is advised customers talk to their usual insurance company to take out transport insurance.

CIG TRANSARC TRADESMAN

Find Plant and Equipment For Sale in Bayswater North. Browse 200 listings from Newmac Equipment.

New & Used Plant and Equipment For Sale in Bayswater North

Newmac Equipment

Sale Price

ECOCA EL 5110

DABROWSKA HWC 110 HORIZONTAL BORING MACHINE

2002 FMB TURBO 5-42

FIMAX 2408F

FREDERICK POLLARD CORONA

SERVIAN JF23 60A C FRAME POWER PRESS

TAKANG TK 330

IEMCA TS 560/61/P

SUNDERLAND NO.27 GEAR PLANNER

DYNAVAC VACUUM TANK VACUUM TANK

MORI SIKI SL 25 CNC LATHE

CIG TRANSARC TRADESMAN

Newmac Equipment

Dealer Address