Newmac Equipment

We have a Pollard 25AN Corona 4MT Pillar drill for sale.

Specifications are as follows

Table size 500 x 500mm
Max drill size in mild steel 40mm approx
Max distance from table to spindle nose 620mm
Distance from spindle to column 320mm
9 spindle speeds
Auto Feed
Spindle Taper 4MT
Quill travel 180mm
Spindle Motor 3hp
Machine voltage, 3 phase 415 volt
Overall dimensions 660mm x 1,100mm x 2500mm high
Weight 1.5Tonne approx

We have test run this pillar drill in our warehouse.

For customers who wish to inspect this machine we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job prior to purchase.

This machine is in our warehouse so feel free to pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery, if you have machines surplus to requirements or you are closing down, please feel free to contact us here at Newmac Equipment.

POLLARD 25AN

We have a good working order Brobo Super 12'' Coldsaw for sale

Comes with/Features

Quick action vice
Mitering locking device stops at 45° left, Straight & 45° right
Coolant system
Single speed motor
Motor 1.5hp
Motor three phase 415V

Click here for a printable pdf & price

We have run this Brobo coldsaw, all works well & cuts square. The coldsaw is in our warehouse so please feel free to pop in to inspect the machine at your convenience.

A note to all prospective customers. We are happy to get freight quotes anywhere in Australia or worldwide. If the sale of any machine goes ahead, please note the machines are not insured during transport by either the transport companies or Newmac Equipment. It is advised customers talk to their usual insurance company to take out transport insurance.

We are always interested in purchasing metalworking machinery, if you have machines surplus to requirements or you are closing down, please feel free to contact us here at Newmac Equipment.

BROBO SUPER 12''

We have a used Keiyo  Seiki KM 1800 Centre Lathe  for sale

On special price reduced to $3000+GST

While the machine is functional, we want to make sure youre fully informed about its condition. There is some wear on the slideways, & the main traverse handle has seen better days which has resulted in it being sloppy.

We take great care to provide accurate descriptions of our machines and want to ensure our customers have all the information they need to make an informed purchase decision. Due to the wear and tear on the lathe, we have reduced the price to reflect this issue.

Specifications are as follows

Swing over the bed 440mm
Swing over the saddle 240mm
Approx. swing in the gap 660mm
Distance between centres 1200mm
Spindle bore 50mm
Spindle mount, A Type Bolt On
Spindle speeds 30 to 1500 rpm
Machine voltage required 415 volt
Overall dimensions including coolant tank 2,350mm x 900mm x 1,450mm high
Weight 1.5 tons
Year of Manufacture 1968
Features

Imperial dials
Gap bed
Foot brake
Comes with the following accessories

3 Jaw chuck
Solid tool post
Travelling steady
Chuck guard
Coolant system
Work light
We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job prior to purchase.

This centre lathe is in our warehouse so please feel free to pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or have machinery that is surplus to requirements, we would appreciate the opportunity to assist in any way we can.

KEIYO SEIKI KM 1800

We have a Swedish-made, Arboga E825 Geared Head Pedestal Drilling Machine for sale.

Quote stock # 3935

Specifications are as follows

Table size Dia 350mm
Distance from the centre of the spindle to the column 230mm
Distance from table to spindle nose, table fully down & head fully up 670mm
Spindle Speeds 100 to 2900rpm
Manual feed
Spindle taper Morse 3
Quill travel Approx. 110mm
Power requirements 415 volt
Weight Approx. 200kgs

We have run this machine & all works well.

We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job prior to purchase.

This drilling machine is in our warehouse so please feel free to call us for more information & price or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or having machinery that is surplus to requirements, we would appreciate the opportunity to assist in any way we can.

A note to all prospective customers. We are happy to get freight quotes anywhere in Australia or worldwide. If the sale of any machine goes ahead, please note the machines are not insured during transport by either the transport companies or Newmac Equipment. It is advised customers talk to their usual insurance company to take out transport insurance.

ARBOGA E825 GEARED HEAD PEDESTAL DRILLING MACHINE

We have a  good used condition CIG Transarc Tradesman Arc Welding Machine for sale.

High Range 70  200 amps
Low Range 50  150 amps
Power requirements 415 volt, 3 phase
Click here for a printable (pdf) report & price, which will open in a new tab

We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job prior to purchase.

Please feel free to pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or having machinery that is surplus to requirements, we would appreciate the opportunity to assist in any way we can.

A note to all prospective customers. We are happy to get freight quotes anywhere in Australia or worldwide. If the sale of any machine goes ahead, please note the machines are not insured during transport by either the transport companies or Newmac Equipment. It is advised customers talk to their usual insurance company to take out transport insurance.

CIG TRANSARC TRADESMAN

We have a good working condition Promecam GTH 425 Hydraulic Guillotine for sale

Specifications are as follows
Capacity 2.5m x 4mm
Machine Voltage 415 volt
Dimensions for Transport 3m x 1.9m x 1.7m high
Weight Approx. 5 tons
Please click here for a printable pdf report & price (opens in new tab)

We have had this guillotine running & all works well

This guillotine is in our warehouse so please feel free to contact us or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery, if you have machines surplus to requirements or you are closing down, please feel free to contact us here at Newmac Equipment.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

PROMECAM GTH 425 HYDRAULIC GUILLOTINE

We have a good-condition Hafco BS10LS horizontal bandsaw for sale.

Specifications are as follows
Max Cutting Capacity Round & square 90°/45° 250mm/235mm
Max Cutting Capacity Rectangular 90°/45° 468 x 250/250 x 240
Blade Speeds Variable 18-102 m/min
Blade Drive Motor 2HP/1.5KW
Dimensions for Transport 1.75m x 0.75m x 1.2m high
Weight 380 kgs

Features
Mitre Cuts Up To 45º
Adjustable hydraulic feed cutting rate
Swivel base
A limit switch stops the machine when the cut is complete

In addition to this horizontal bandsaw, our warehouse houses one of the countrys largest inventories of used machinery. We invite you to explore our website, where we consistently update our stock, offering a vast selection of engineering machinery and equipment for sale.

We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment.

Considering selling your machinery? We buy as well as sell machinery. Downsizing, relocating, closing down, or having surplus equipment. We are always on the lookout for quality machinery to buy. Please do not hesitate to contact us to discuss your machinery needs and how we can help you.

We want to extend a note to all prospective customers. We are happy to provide freight quotes for machines to be shipped anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

HAFCO BS10LS HORIZONTAL BANDSAW

We have a new Mitutoyo 520-165 Vernier Height Gauge for sale. Reads in metric & imperial, range 0 to 600mm.

Price reduced for quick sale $1000+GST

Mitutoyo Model 520-165

New, never been used

Please feel free to call us for more information & price or pop in to inspect the boring head at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or have machinery that is surplus to requirements, we would appreciate the opportunity to assist in any way we can.

MITUTOYO 520-165 VERNIER HEIGHT GAUGE

CIG Transarc handi welder 
Ex gov, see photo for spec's.

CIG TRANSARC HANDI WELDER

We have a Leyland Gifford pedestal drilling machine for sale.

Specifications are as follows

Working area of the table 590mm x 525mm
Distance from the Column to the centre of the spindle 250mm
Spindle taper MT2
Spindle speeds 75 to 1500 rpm
Weight approx 750kgs
Overall dimensions 770mm x 1100mm x 2400mm high
Drill is in working condition but auto feeds are inoperable

For customers who wish to pay us a visit, we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job prior to purchase.

This geared head drill is in our warehouse so please feel free to call us for more information & price or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or have machinery that is surplus to requirements, we would appreciate the opportunity to assist in any way we can.

LEYLAND GIFFORD PEDESTAL DRILL

We have a very good used condition, Pfauter PA320 CNC gear hobbing machine for sale, capable of cutting spur & helical gears 350mm diameter & 3DP pitch. Call us for more information. Please note this machine is not in our warehouse, but we are happy to arrange an appointment for inspection of the machine if required.

PFAUTER PA320 CNC GEAR HOBBING MACHINE

We have a Omes MEC 350 Cold Saw for sale

Good working condition

Specifications
Max cutting size round at 90° with new blade 115mm
Power requirements three phase 415V

Features
Quick action vice
Mitering cutting left & right
Coolant system
3 speed motor

Please feel free to inspect machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment.

Considering selling your machinery? We buy as well as sell machinery. Downsizing, relocating, closing down, or having surplus equipment. We are always on the lookout for quality machinery to buy. Please do not hesitate to contact us to discuss your machinery needs and how we can help you.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

OMES MEC 350 COLD SAW

Find Plant and Equipment For Sale in Bayswater North. Browse 207 listings from Newmac Equipment.

New & Used Plant and Equipment For Sale in Bayswater North

Newmac Equipment

Sale Price

POLLARD 25AN

BROBO SUPER 12''

KEIYO SEIKI KM 1800

ARBOGA E825 GEARED HEAD PEDESTAL DRILLING MACHINE

CIG TRANSARC TRADESMAN

PROMECAM GTH 425 HYDRAULIC GUILLOTINE

HAFCO BS10LS HORIZONTAL BANDSAW

MITUTOYO 520-165 VERNIER HEIGHT GAUGE

CIG TRANSARC HANDI WELDER

LEYLAND GIFFORD PEDESTAL DRILL

PFAUTER PA320 CNC GEAR HOBBING MACHINE

OMES MEC 350 COLD SAW

Newmac Equipment

Dealer Address