Newmac Equipment

We have a KSX3 Sieg CNC vertical machining centre for sale

Stock # 4205

Technical Data Snapshot

Year of manufacture 2018
Table size 550mm x 160mm
X/Y/Z travel 300mm x 120mm x 270mm
Control Type PC Based Sieg CNC Milling Software
Max spindle speed 5,000rpm
Spindle taper R8
Spindle Motor Hp/Kw 1.3hp, 1kw
Machine power requirements 240 volt
Machine Dimensions for Transport, including cabinet 1300 wide x 850 x 1900mm high
Weight Approx. 500kgs

Includes the following accessories, which were optional extras when the machine was new.

Full interlocked enclosure
MPG handwheel
Coolant Pump and Tank
Worklight
Work vice

We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment.

Considering selling your machinery? We buy as well as sell machinery. Downsizing, relocating, closing down, or having surplus equipment. We are always on the lookout for quality machinery to buy. Please do not hesitate to contact us to discuss your machinery needs and how we can help you.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise customers to take out transport insurance with their usual insurance company.

SIEG KXS3

AM Machinery 3.2m x 6mm Hydraulic Swing Beam Guillotine for sale

Fitted with NC backgauge control and rear safety guarding.
This machine is suited to general sheet-metal cutting up to 6 mm mild steel over 3200 mm length.

Specifications
Cutting Capacity: 6 mm mild steel
Cutting Length: 3200 mm
Construction: Swing beam shearing action
Hydraulic Operation
Motorised backgauge, NC controlled
Foot-pedal operation
Rapid stroke adjustment
Adjustable blade clearance
Approx. machine weight: 6 tonnes (as marked on machine tag)
Power requirements 3 phase 415 volt
Overall dimensions for transport 3.8m x 2.1m x 1.6m high (Front sheet supports removed)
Year of Manufacture 2007

Control System
NC backgauge controller (E21-style)
Digital backgauge readout
Keyed power/mode switch
Start and stop push buttons
Digital stroke counter
Adjustable stroke-time dial
Roving foot pedal

Safety Features
Rear safety guarding as shown in the photos
Front finger guard
Emergency stop button on the main panel & the foot pedal
Hydraulic pressure gauge for monitoring system pressure

Condition
The machine has been checked and operated in our workshop.
All major functions run.

Included
Motorised NC backgauge
Foot-pedal
Rear guarding

We have had this guillotine running & all works well

This guillotine is in our warehouse so please feel free to call us or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery, if you have machines surplus to requirements or you are closing down, please feel free to contact us here at Newmac Equipment.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

AM MACHINERY QC12Y

We have a Colchester Triumph 2000 centre lathe for sale

Stock # 4669

This machine was purchased new by a Melbourne hospital and used only for general maintenance work within their workshop. It presents in excellent used condition.

About Colchester Lathes

Colchester is one of the most recognised and respected names in the world of manual centre lathes. Established in the United Kingdom in 1917, Colchester built its reputation on producing robust, accurate and reliable machines designed for both industrial production and precision toolroom work.
The Triumph series, in particular, became a benchmark in many engineering shops due to its solid construction, long service life, and ease of operation. Colchester lathes are known for their excellent spindle accuracy, intuitive controls and strong parts support, making them a favourite across education, maintenance, fabrication and manufacturing environments.

Specifications
Country of origin: England

Swing over bed: 390 mm

Swing over saddle: 240 mm

Swing in gap: 580 mm

Distance between centres: 1250 mm

Spindle bore: 54 mm

Spindle mount: Camlock D1-6

Spindle speed range: 25  2000 rpm

Motor: 7.5 HP / 5.5 kW

Power supply: 415 V

Overall dimensions: 2.45 m × 1.1 m × 1.3 m (H)

Approx. weight: 3 tonnes

Dials: Metric

Accessories Included
3-jaw chuck

4-jaw chuck

Faceplate

Quick-change toolpost

Fixed steady

Thread chasing dial

Additional Features
Gap bed design

All functions tested and operating correctly

Click here for additional information & price (will open a pdf in a new tab)

We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job before purchase.

This lathe is in our warehouse so please feel free to call us for more information & price or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or having machinery surplus to requirements, we would appreciate the opportunity to assist in any way we can.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

COLCHESTER TRIUMPH 2000 CENTRE LATHE

We have a Colchester Triumph Electronic  CNC Teach lathe for sale

Stock # 4169

Specifications are as follows

Fanuc 20TControl
Spindle Nose D1-6 Camlock
Spindle speed range 13 to 2500 rpm
Main motor HP/KW 10/7.5
Max Turning Dia 400mm
Max Turning length 1180mm
Hole through spindle 54mm
Supply voltage needed 415 volt
Overall dimensions Machine  2600mm x 1500mm x 1670mm High
Weight Machine approx 3000kgs
Year of Manufacture 1996

Accessories included

Quick Change Toolpost and tool holders
3 Jaw Chuck
Features

Teach in Software
Coolant system
Worklight

We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment. We pride ourselves on providing exceptional customer service and believe that this personalized approach allows us to exceed your expectations.

We welcome any inquiries about the machine and invite you to contact us at

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

Considering selling your machinery?

We are always interested in purchasing metalworking machinery & surplus equipment, if you have one machine or a number of machines you need gone, please feel free contact us here at Newmac Equipment.

1996 COLCHESTER ELECTRONIC

We have a Herless Machinery 30 Tonne x 2.5m Hydraulic Press Brake Folder for sale

Stock # 4202

We are pleased to offer for sale a Herless press brake folder. Includes front and rear safety guarding and foot pedal.

This machine was previously at a Door Manufacturer and was set up with their own tooling.

It did not come with the Standard Top and Bottom Tooling and is priced as such.

There is no information with the machine to advise the tonnage but testing with a load cell we have achieved over 30 Tonne.

Specifications are as follows

Foot Pedal Operation
Length of Work Table 2.5m
Working Force 30 Tonne (See photos)
No Back Guage fitted
Power requirements 415 volt
Overall dimensions 2,750mm x 960mm x 2,560m high
Weight 4.5 tonnes

In addition to this hydraulic press brake folder, our warehouse proudly houses one of the countrys largest inventories of used machinery. We invite you to explore our website, where we consistently update our stock, offering a great selection of engineering machinery and equipment for sale.

We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment.

Considering selling your machinery? We buy as well as sell machinery. Downsizing, relocating, closing down, or having surplus equipment. We are always on the lookout for quality machinery to buy. Please do not hesitate to contact us to discuss your machinery needs and how we can help you.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

HERLESS 30T X 2.5M

We have for sale a Gleason 12? Straight Bevel Gear Generator

This gear generator is built as a complete unit for rough and finish cutting large or small quantities of straight bevel gears. It has a capacity for gears not exceeding 3 diametrical pitch, 10-1 ratio and a cone distance of 8 1/2? (215mm).

Stock # 4226

Largest Cone distance 8 1/2? (215mm)
Greatest Pitch Angle 90º
Extreme Ratio 10-1
Largest Pitch Dia 1-1 ratio 12?  (300mm)
Largest Pitch 3DP
Longest Face 3 1/2 (89mm)
Length of Stroke 1/2  3 3/4 (13mm to 95mm)
Motor Power 3hp 415Volt
Machine transport Dimensions 2.3m x 1.6m x 1.6m High
Machine Weight 3.7 Tonne approx

Accessories

Set of change gears
Coolant System

We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment.

Considering selling your machinery? We buy as well as sell machinery. Downsizing, relocating, closing down, or having surplus equipment. We are always on the lookout for quality machinery to buy. Please do not hesitate to contact us to discuss your machinery needs and how we can help you.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise customers to take out transport insurance with their usual insurance company.

GLEASON 12 INCH

Steelmaster Hydraulic Press Brake Folder for sale

Stock # 3975

We are pleased to offer for sale a Steelmaster press brake folder. Includes rear safety guarding, foot pedal, top and bottom tooling as per photos.

Specifications are as follows

Foot Pedal Operation
Length of Work Table 2.5m
No Backguage fitted
Throat Depth 200mm
Nominal Pressure  calculated to be 25 tonnes
Power requirements 415 volt
Overall dimensions 2.7m x 1.55m x 2.1m high
Weight 3.5 tons

In addition to this hydraulic press brake folder, our warehouse proudly houses one of the countrys largest inventories of used machinery. We invite you to explore our website, where we consistently update our stock, offering a great selection of engineering machinery and equipment for sale.

We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment.

Considering selling your machinery? We buy as well as sell machinery. Downsizing, relocating, closing down, or having surplus equipment. We are always on the lookout for quality machinery to buy. Please do not hesitate to contact us to discuss your machinery needs and how we can help you.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

STEELMASTER 2.5M X 25 TONNE

We have a high-quality, used Italian-made Sicar S630A Thicknesser in good condition for sale.

Designed for accurate planing of wide boards and production work, this machine features cast-iron tables and a robust feed system  ideal for cabinet shops, joineries, and schools needing a consistent finish and easy setup.

Control Overview  What Does What
Feed speed selector (lever, lower left side panel): two-speed mechanical gearbox

Slow: for finer finish and difficult grain

Fast: for higher throughput on softwoods/straight grain

(Always change speeds with the machine stopped)

Thickness scale (left of mouth): shows the table-to-cutter distance (finished thickness), with red pointer

Table raise/lower (rocker switch ? / ? on front panel): powered rise/fall of the thicknessing table for fine setting

Indexed red selector (top of panel): quick reference dial to repeat common settings. Works with the raise/lower switch as a guide  not a digital readout

Main motor controls:

Green = Start

Red = Stop

Emergency stop (red mushroom, lower front panel): latches power off; twist to release before restarting

Main isolator (black rotary switch, lower front panel): master on/off for the whole machine

Specifications
Make/Model: Sicar S630A Thicknesser (Italy)

Maximum planing width: 630 mm

Maximum workpiece height: up to ~300 mm (typical for this class)

Table length: ~1,0001,100 mm (cast iron)

Cutterblock: 4-knife, HSS (straight)

Feed speeds: two mechanical speeds (approx. 6 & 12 m/min, model-dependent)

Main motor: approx. 7.59 kW (1012 HP), 415 V three-phase

Feed/raise motors: separate drives for feed rollers and powered table lift

Construction: cast-iron tables, heavy steel cabinet

Overall Dimensions: 1250mm x 1100mm x 1150mm high
Approx. weight: 1,200 kg

Controls: purely manual / electro-mechanical (no PLC)

Note: Specs are typical for the S630A series and may vary by year/options. Figures can be confirmed on request.

Inspection & Availability
Youre welcome to inspect this thicknesser at our Bayswater North premises during business hours. A run-up and thicknessing demonstration can be provided on request.

Business hours:

MonThu 8:30 am  4:45 pm

Fri 8:30 am  3:00 pm

Closed weekends & public holidays

We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job before purchase.

This milling machine is in our warehouse so please feel free to call us for more information & price or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or having machinery surplus to requirements, we would appreciate the opportunity to assist in any way we can.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

SICAR S630A THICKNESSER

We have an Ex-TAFE, Microcut 857 Turret Milling Machine for sale, 

Stock # 4221

Microcut mills are manufactured in Taiwan by Buffalo Machinery, a well-established builder known worldwide for producing reliable, high-quality milling machines, lathes, and machining centres. This Microcut 857 turret mill is a robust, versatile machine presented in good working order and ready for immediate use.

Specifications
Table size: 1270mm x 255mm
Spindle speeds: 50  3750 rpm
Spindle taper: NT40
Motor: 5HP / 3.7kW
Voltage: 3 phase, 415V
Overall dimensions: 1.7m x 1.5m x 2.2m high
Weight: Approx. 1.5 tonnes

Features & Accessories
Power feeds to X & Y axis (Align brand)
Table power rise
Easson 3-axis DRO (checked and fully operational)
Coolant system fitted

Condition
No faults found  machine is in good working order.

We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment, knowing youre making a smart choice for your business.

Are you considering selling your machinery? We buy as well as sell machinery. Downsizing? relocating? closing down? or having surplus equipment. We are always on the lookout for quality machinery to buy. Please do not hesitate to contact us to discuss your machinery needs and how we can help you. Your success is our priority.

We want to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise customers to take out transport insurance with their usual insurance company.

MICROCUT 857 TURRET MILLING MACHINE

Pfauter SF1 Worm & Thread Milling Machine for sale

Maker: Maschinenfabrik Pfauter, Chemnitz (Germany)
Model: SF1
Type: Manual worm and thread milling machine

Overview

The Pfauter SF1 is a precision German-made worm and thread milling machine designed for producing single- or multi-start worms, lead screws and other high-accuracy threads. Its rigid construction, short gear trains and versatile head options make it suitable for both repair workshops and gear manufacturers.

Key Features (please note the following was copied from information from .lathes./pfauter-sf1/, our machine may differ)

Cuts workpieces up to 295 mm in diameter (standard headstock) or 320 mm (optional headstock).
Handles pitch modules up to 15 mm (side-milling head) or 30 mm (end-milling head).
Maximum centre distance 730 mm (standard headstock), 680720 mm with larger headstock.
Lead angles up to 90° with lead ranges from 24590 mm to 15,000 mm.
Swivelling milling spindle: +90° to right / 125° to left.
Spindle bore: 80 mm (standard) or 155 mm (special headstock).
Maximum cutter sizes: Ø210 × 100 mm (standard) or Ø255 × 160 mm (parallel head).

Technical Specifications

Centre height: 150 mm (standard), 163 mm (special headstock).
Power: 11 kW total consumption.
Main drive motor: 7.4 HP / 5.5 kW
Rapid traverse motor: 4 HP / 3 kW
Electrical: 3 phase 415 volt
Weight: Approx. 4,400 kg (with accessories)
Floor space: 3,600 × 2,170 × 1,630 mm (with doors open)

Applications

Milling precision worms, lead screws and multi-start threads.
Adjustable indexing gear minimises backlash, ensuring high accuracy.
Suitable for repair shops and gear manufacturing operations.
We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job before purchase.

This machine is in our warehouse so please feel free to call us on  for more information & price or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or having machinery surplus to requirements, we would appreciate the opportunity to assist in any way we can.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

PFAUTER SF1 WORM & THREAD MILLING MACHINE

Matrix No. 37 Worm Grinding Machine for sale

This Matrix No. 37 Automatic Indexing Worm Grinding Machine is designed for precision grinding of worms and similar components. Built for high accuracy, it handles a wide range of diameters, thread pitches, and helix angles, making it suitable for both standard and large swing workpieces.

Specifications:
Maximum work diameter: 14?
Maximum diameter (large swing type): 15 ?? & 20? dia. × 6? in gap
Maximum length between centres: 20?
Maximum length from centreline of wheel to workhead centre: 19 ¾?
Maximum helix angle (RH38° or LH45°): 
Maximum pitch correction: 0.025? per ft.
Maximum lead: 12?
Finest thread: 40 TPI
Maximum work weight: 100 lb
Maximum thread length in one setting: 18?
Head & tailstock centres: No. 4 Morse
Workhead motor power: ½ HP
Wheelhead motor (grinding): 3 ? HP
Wheelhead motor (crushing): 1 ? HP
Coolant pump capacity: 12 gallons per minute
Coolant tank capacity: 30 gallons
Work speed range: 0.2  31 RPM
Workhead return speeds: 6.25, 25, or 100 RPM
Maximum number of starts indexed: 6

Accessories, as per photos

We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment.

Considering selling your machinery? We buy as well as sell machinery. Downsizing, relocating, closing down, or having surplus equipment. We are always on the lookout for quality machinery to buy. Please do not hesitate to contact us to discuss your machinery needs and how we can help you.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise customers to take out transport insurance with their usual insurance company.

MATRIX NO. 37 WORM GRINDING MACHINE

We have a Harrison Alpha 330 Plus  CNC Teach lathe for sale

Stock # 4079

Specifications are as follows

Fanuc 21 TBControl
Spindle Nose D1-4 Camlock
Spindle speed range 0 to 3500 rpm
Main motor HP/KW 7.5/10
Max Turning Dia 330mm
Max Turning length 1000mm
Hole through spindle 42mm
Supply voltage needed 415 volt
Overall dimensions Machine  2040mm x 1200mm x 1550mm High
Weight Machine approx 1200kgs
Year of Manufacture 1999

Accessories included

Quick Change Toolpost and tool holders
3 Jaw and 4 Jaw Chuck
Travelling Steady Rest

Features
Teach in Software
Coolant system
Worklight

We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment. We pride ourselves on providing exceptional customer service and believe that this personalized approach allows us to exceed your expectations.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

Considering selling your machinery?

We are always interested in purchasing metalworking machinery & surplus equipment, if you have one machine or a number of machines you need gone, please feel free contact us here at Newmac Equipment.

HARRISON ALPHA ALPHA 330 PLUS

Find Plant and Equipment For Sale from $10,000 to $20,000 from Newmac Equipment.

Plant and Equipment For Sale from $10,000 to $20,000

Newmac Equipment

Sale Price

SIEG KXS3

AM MACHINERY QC12Y

COLCHESTER TRIUMPH 2000 CENTRE LATHE

1996 COLCHESTER ELECTRONIC

HERLESS 30T X 2.5M

GLEASON 12 INCH

STEELMASTER 2.5M X 25 TONNE

SICAR S630A THICKNESSER

MICROCUT 857 TURRET MILLING MACHINE

PFAUTER SF1 WORM & THREAD MILLING MACHINE

MATRIX NO. 37 WORM GRINDING MACHINE

HARRISON ALPHA ALPHA 330 PLUS

Newmac Equipment

Dealer Address