Newmac Equipment

Archdale MT5 x 1600mm radial arm drilling machine.

ARCHDALE MT5 X 1600MM

We have a JF23 60A, 60 ton, C frame power press for sale.

Specifications are as follows

Nominal Pressure 600KN
Slide Stroke 101.6mm
No. of Strokes per minute 100
Max. Shut Height 362mm
Die Height Adjustment 76mm
Throat Depth 279mm
Weight 5 tons

This press is new old stock & has never been used.

Features pneumatic friction clutch

This JF23 60A C frame Power Press is in our warehouse, please feel free to call us for more information or pop in to inspect the machine at your convenience.

Are you thinking of selling your used or surplus equipment? Looking at Downsizing, Relocating, Closing Down or have machinery that is surplus to requirements. We are always looking for machinery to buy,  so would appreciate the opportunity to assist in any way we can.

We are always interested in purchasing metalworking machinery, if you have machines surplus to requirements or you are closing down, please feel free to contact us here at Newmac Equipment

SERVIAN JF23 60A C FRAME POWER PRESS

We have a Iemca TS 560 61 P Magazine Barfeeder for sale.
Now on sale, price reduced from $5000+GST to $2500+GST

General Specifications

Max Bar Capacity 70mm
Magazine load 10-70mm Bar
Chain Feed with drive motor
6m Bar Length
Overall dimensions 8,300mmm x 700mm x 1,800mm high
Weight appox 1,500kgs
This Iemca Magazine Barfeeder is in our warehouse so please feel free to call us on  for more information & price or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment, if you have one machine or a quantity of machines you want to sell, please feel free to give us a ring.

IEMCA TS 560/61/P

We have a Yunnan CY S1760G Centre Lathe for sale

Specifications are as follows
Swing Over Bed 410mm
Swing Over Saddle 230mm
Swing in Gap Approx 640mm
Distance Btw Ctrs 1.5m
Spindle Bore 58mm
Spindle mount Camlock D1-6
Spindle Speeds 20 to 2000 rpm
Power requirements 3 phase, 415 volt
Overall dimensions 2.7m x 1.05m x 1.6m high
Approx. weight 2 tons
The lathe features an imperial lead screw, but the dials have both metric & imperial divisions

Accessories
3 & 4 Jaw chuck
Dog plate for turning between centres
Jenix 2 axis digital read out (tested & working)
Quick change tool post
Fixed Steady
Travelling Steady
Thread Chasing Dial
Foot Brake Pedal tested & working
Coolant System, can be heard running

We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job before purchase.

This milling machine is in our warehouse so please feel free to call us for more information & price or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or having machinery surplus to requirements, we would appreciate the opportunity to assist in any way we can.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

YUNNAN CY S1760G CENTRE LATHE

We are pleased to offer a used, Jones & Shipman 1300 Universal Cylindrical Grinder for sale.

Stock #3969

Jones & Shipman was a UK based company that manufactured grinding machines for more than a century. Jones & Shipman produced a wide range of grinding machines, including cylindrical, surface, and tool grinders, which are known for their robust construction, precision, and reliability. Jones & Shipman grinders are highly regarded in the manufacturing industry for their quality, durability, and exceptional performance. Dont miss the opportunity to own this cylindrical grinder at an affordable price. Contact us today to learn more about this product.

Specifications are as follows

254mm swing
686mm between centres
Comes with

Coolant system
Internal grinding attachment
Work steady
DRO

This cylindrical grinder is in our warehouse, please feel free to call us for more information or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery, if you have machines surplus to requirements or you are closing down, please feel free to contact us here at Newmac Equipment

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

JONES & SHIPMAN 1300

We have an excellent used condition Ecoca EL 5110 CNC teach lathe for sale.

Specification are as follows:

Swing over the bed 510mm
Swing over the cross slide 305mm
Distance between centres 1000mm
Spindle nose D1-8
Spindle bore 80mm
Spindle speeds 20 to 2000 rpm
15HP Main spindle motor
Year of manufacture 1985
Comes with the following accessories:

3 Jaw chuck
4 position tool post
Mitsubishi Meldas 520A  CNC control

This machine is in our warehouse ready for inspection under power.

ECOCA EL 5110

We have a Russian built Stankoimport 6P 82 III Universal milling machine for sale 

Stock # 4032

Specifications are as follows

Table size 1,250mm x 320mm
XYZ travels 800 x 240 x 410mm
Features power feeds on XY&Z axis
Vertical head spindle speeds 50 to 1600 rpm
Horizontal spindle speeds 31.5 to 1600 rpm
Spindle tapers vertical NT40, horizontal NT50
Horizontal Spindle Motor 7.5kw
Machine Voltage 415 volt
Overall dimensions 2,470 x 1,950 x 1,950mm (High)
Weight 3.3 tonnes

Comes with the following accessories

2 horizontal arbor supports
2 horizontal arbors
90 Degree Milling Head
NT50 to NT40 Spindle Adapter
NT 50 and NT 40 Toolholders


We have run this machine & all is working, although it can be difficult to select & change feed rates. We have sold approximately 10 of these machines over the years & they have all been the same, so this is typical of these machines.

In addition to this Universal milling machine, our warehouse proudly houses one of the largest inventories of used machinery in the country. We invite you to explore our website, where we consistently update our stock, offering a great selection of engineering machinery and equipment for sale.

We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment.

Considering selling your machinery? We buy as well as sell machinery. Downsizing, relocating, closing down, or having surplus equipment. We are always on the lookout for quality machinery to buy. Please do not hesitate to contact us to discuss your machinery needs and how we can help you.

We would like to extend a note to all prospective customers. We are happy to provide freight quotes for machines to be shipped anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

STANKOIMPORT 6P 82 III

We have a X6232 CX16 Universal milling machine for sale

Stock # 4118

Specifications are as follows

Table size 1600mm x 320mm
XYZ travels 800 x 240 x 300mm
Features power feeds on X,Y & Z axis
Vertical head spindle speeds 9 speeds 125 to 2000 rpm
Horizontal spindle speeds 30 to 1500 rpm
Spindle tapers vertical NT40, horizontal NT50
Motor Hp/Kw Vertical head motor 3.0kw, Horizontal 5.0kw
Machine Voltage 415 volt
Overall dimensions 2.1m x 2.3m x 1.9m high
Weight 3 tonnes
Comes with the following accessories

Coolant System
1 horizontal arbor
1 Arbor support
Dividing Head with power take off


We have run this machine and all is working, although it can be difficult to select & change feed rates. We have sold approximately 10 of these machines over the years & they have all been the same, so this is typical of these machines.

In addition to this  X6232 Universal milling machine, our warehouse proudly houses one of the largest inventories of used machinery in the country. We invite you to explore our , where we consistently update our stock, offering a great selection of engineering machinery and equipment for sale.

We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment.

Considering selling your machinery? We buy as well as sell machinery. Downsizing, relocating, closing down, or having surplus equipment. We are always on the lookout for quality machinery to buy. Please do not hesitate to contact us to discuss your machinery needs and how we can help you.

We would like to extend a note to all prospective customers. We are happy to provide freight quotes for machines to be shipped anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

CHANG ZHENG MACHINE TOOL WORKS X6232 CX16

We have an Ex TAFE, Good used condition, CHINHUNG CH430 X 1100 Centre Lathe for sale
Specifications & general information are as follows
Manufactured in Taiwan
Features gap bed
Swing Over Bed 432mm
Swing Over Saddle 268mm
Swing in Gap 610mm
Distance Between centres 1100mm
Spindle Bore 58mm
Spindle mount Camlock D1-6
Spindle Speeds 12 speeds, 35 to 2000 rpm
Motor Hp/Kw 7.5hp/5kw
Power requirements 3 phase, 415 volt
Overall dimensions 2.25m x 1050mm x 1.7m high
Net weight 1.6 tons
This lathe features a metric lead screw & dials
Accessories/Features
3 Jaw chuck
4 Jaw chuck
Dog plate for turning between centre
Fagor 2-axis digital readout (checked & working)
Quick change tool post
Foot brake (checked & working)
Coolant system (can be heard running)
Interlocked chuck guard
We have run this machine. & all works well.
We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment.
Considering selling your machinery? We buy as well as sell machinery. Downsizing, relocating, closing down, or having surplus equipment. We are always on the lookout for quality machinery to buy. Please do not hesitate to contact us to discuss your machinery needs and how we can help you.
We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.
Our contact details are as follows,
Newmac Equipment Pty Ltd,
(Engineering Machine Tool & Accessory Sales)
10 Stephenson Rd,
Bayswater North,
Vic 3153,

Email sales@newmac.com.au
Web www.newmac.com.au

CHINHUNG CH430 X 1100 CENTRE LATHE

We have an excellent used condition, Mazak Quick Turn 8G CNC Lathe for sale.

Specifications related to this cnc lathe are as follows
Spindle nose A2-5
Max spindle speed 4500
Main motor 10hp
Distance between spindle nose & tool holder 145mm to 448mm
Standard cutting dia. 100mm
Max cutting dia. 160mm
Max bar material cutting dia. 32mm
Max length of work 160mm
Max chuck work capacity 25kgs
Hole dia.through spindle 50mm
Weight 2.85 tons
Overall dimensions, Main machine 1850mm x 1700mm x 1900mm high
Chip conveyor 2200mm x 500mm x 1150mm high

Features & comes with the following accessories
Built-in tool setter
Chip conveyor
Coolant system
Work light
Gang type tooling

We have had this CNC lathe running & all works well.

We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment. We pride ourselves on providing exceptional customer service and believe that this personalized approach allows us to exceed your expectations.

We welcome any inquiries about the machine and invite you to contact us at

We would like to extend a note to all prospective customers regarding the transport of machinery. We are happy to provide freight quotes for machines to be shipped anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance. Our team is committed to providing exceptional customer service, and we want to ensure that our customers are fully informed about the potential risks involved with transporting machinery. Please do not hesitate to contact us if you have any questions or concerns about shipping machinery. Thank you for considering our products, and we look forward to the opportunity to serve you.

Considering selling your machinery?

Downsizing, relocating, closing down, or having surplus equipment, we would be pleased to assist you. We are always on the lookout for quality machinery to buy and can offer you a fair price for your equipment. Our team of experts will work with you to ensure a smooth and hassle-free process, taking care of everything from inspection to transportation. We are committed to providing our customers with exceptional service and value transparency and honesty in all of our dealings. Please do not hesitate to contact us to discuss your machinery needs and how we can help you. We look forward to hearing from you.

MAZAK QUICK TURN 8G CNC LATHE

We are pleased to offer a used, Jones & Shipman 1300  Universal Cylindrical Grinder for sale.

Stock #3970

Jones & Shipman was a UK based company that  manufactured grinding machines for more than a century. Jones & Shipman produced a wide range of grinding machines, including cylindrical, surface, and tool grinders, which are known for their robust construction, precision, and reliability. Jones & Shipman grinders are highly regarded in the manufacturing industry for their quality, durability, and exceptional performance. Dont miss the opportunity to own this cylindrical grinder at an affordable price. Contact us today to learn more about this product.

Specifications are as follows

254mm swing
686mm between centres
Comes with

Coolant system
Internal grinding attachment
Work steady
DRO

This  cylindrical grinder is in our warehouse, please feel free to call us on  for more information or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery, if you have machines surplus to requirements or you are closing down, please feel free to contact us here at Newmac Equipment

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

We have in good condition a Spanish built Holke F10-V turret milling machine for sale.

Specifications are as follows

Table size 1120mm x 250mm
X/Y/Z travels 800/400/300mm approx
Power feed on X Axis
8 Spindle speeds 67 to 2300 rpm
Spindle taper NT30
Main motor 1.5kw
Machine voltage 415 volt
Dimensions for Transport 1.8m x 1.7m x 2.1m
Weight 1.5 Tonne
Click here for printable PDF & price

Comes with/Features

X axis power feed
Coolant system

Click here for a printable report & price

We have run this milling machine & all works well.

We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job prior to purchase.

This milling machine is in our warehouse so please feel free to call us for more information & price or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or have machinery that is surplus to requirements, we would appreciate the opportunity to assist in any way we can.

HOLKE F10-V

Find Plant and Equipment For Sale from $5,000 to $10,000 from Newmac Equipment.

Plant and Equipment For Sale from $5,000 to $10,000

Newmac Equipment

Sale Price

ARCHDALE MT5 X 1600MM

SERVIAN JF23 60A C FRAME POWER PRESS

IEMCA TS 560/61/P

YUNNAN CY S1760G CENTRE LATHE

JONES & SHIPMAN 1300

ECOCA EL 5110

STANKOIMPORT 6P 82 III

CHANG ZHENG MACHINE TOOL WORKS X6232 CX16

CHINHUNG CH430 X 1100 CENTRE LATHE

MAZAK QUICK TURN 8G CNC LATHE

JONES & SHIPMAN 1300

HOLKE F10-V

Newmac Equipment

Dealer Address