Newmac Equipment

We have a used Colchester Triumph 2000 Centre Lathe for sale

Specifications are as follows

Swing Over Bed 390mm
Swing Over Saddle 240mm
Swing in Gap 580mm
Distance Btw Ctrs 1250mm
Spindle Bore 54mm
Spindle mount Camlock D1-6
Spindle Speeds 25 to 2000 rpm
Motor Hp/Kw 7.5hp/5.5kw
Machine Voltage 415 volt
Overall dimensions 2.45m x 1.1m x 1.3m high
Approx. weight 3 tons
Features imperial dials & lead screw Imperial
Accessories

Chucks/Face plate 3 jaw chuck, 4 jaw chuck & face plate
Toolpost Quick change tool post, one side is broken
Fixed Steady Yes included
Thread Chasing Dial Yes included
Foot Brake Pedal Yes & working
This lathe is a gap bed machine but the gap is missing
Please note the price has been reduced to reflect the condition. The lathe is functionally working but does have wear in the bed


We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job before purchase.

This lathe is in our warehouse so please feel free to call us on  for more information & price or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or having machinery surplus to requirements, we would appreciate the opportunity to assist in any way we can.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

COLCHESTER TRIUMPH 2000 CENTRE LATHE

Used Champion Sullair CSF 22 Rotary Screw Air Compressor for sale

We are selling the compressor as a package with an air dryer

Specifications are as follows
120 cfm
Power requirements 415 volt
Motor 22kw/30hp
Dimensions, Compressor 1.3m x 0.8m x 1.1m high, air dryer 0.65m x 0.7m x 1.05m high
Total weight approx. 1 ton for all 3 items
Date of manufacture 2005
Approx. total hours 12,500 hours

We recommend that customers visit us to inspect machinery, where we are happy to provide a test run in our warehouse to ensure the machine meets their requirements before purchase.

Please feel free to contact us for more information, or feel free to pay us a visit

We are also interested in purchasing metalworking machinery and surplus equipment. If you are looking to downsize, relocate, close down, or have machinery that is surplus to requirements, we would be pleased to assist in any way we can.

We would like to extend a note to all prospective customers regarding the transport of machinery. We are happy to provide freight quotes for machines to be shipped anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance to ensure the safe and secure delivery of their equipment. Our team is committed to providing exceptional customer service, and we want to ensure that our customers are fully informed about the potential risks involved with transporting machinery. Please do not hesitate to contact us if you have any questions or concerns about shipping machinery. Thank you for considering our products, and we look forward to the opportunity to serve you.

SULLAIR CHAMPION SULLAIR CSF 22 ROTARY SCREW AIR COMPRESSOR

We have a Deckel Maho DMC 63V vertical machining centre for sale

Technical Data Snapshot
Made in Germany
Year of manufacture 2003
Table size 800mm x 500mm
X/Y/Z travel 630mm x 500mm x 500mm
Control Type Heidenhain
Max spindle speed 10,000rpm
Spindle taper ST 40
Max programmable Feed Rate 30m/min
Rapid Feed Rate 30m/min
Max Table Load 500kgs
Number of tools that can be held in the tool carousel 24
Spindle Motor Hp/Kw 17.5hp, 13kw
Machine power requirements 3 phase 415 volt
Machine Dimensions for Transport, including control cabinet 2m wide x 3m front to back x 2.3m high
Weight Approx. 5 tons
Flood type coolant System 

Accessories
BLUM laser system for tool setting & tool breakage detection. See photo for more info

We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment.

Considering selling your machinery? We buy as well as sell machinery. Downsizing, relocating, closing down, or having surplus equipment. We are always on the lookout for quality machinery to buy. Please do not hesitate to contact us to discuss your machinery needs and how we can help you.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise customers to take out transport insurance with their usual insurance company.

DECKEL MAHO DMC 63V VMC

We have an excellent used condition, Durma E3090 4 axis CNC Hydraulic Press Brake Folder for sale.

Specifications are as follows
Manufactured in Turkey
Year of manufacture 2008
Max bending length 3050
Tonnage 90
Control 4 axis Durma DU6000 
Number of axis 4
Power requirements 3 phase 415 volt
Overall dimensions 4m x 1.3m x 2.4m high
Weight 5880kg

In addition to this hydraulic press brake folder, our warehouse proudly houses one of the countrys largest inventories of used machinery. We invite you to explore our , where we consistently update our stock, offering a great selection of engineering machinery and equipment for sale.

We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment.

Considering selling your machinery? We buy as well as sell machinery. Downsizing, relocating, closing down, or having surplus equipment. We are always on the lookout for quality machinery to buy. Please do not hesitate to contact us to discuss your machinery needs and how we can help you.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

DURMA E3090 4 AXIS CNC HYDRAULIC PRESS BRAKE FOLDER

We have an Ex TAFE, good used condition Colchester Master 2500 Centre lathe for sale.

Specifications related to the lathe are as follows
Origin, English made
Swing Over Bed 335mm
Swing Over Saddle 210mm
Swing in Gap 480mm
Distance between centres 1m
Spindle Bore 40mm
Spindle mount Camlock D1-4
Spindle Speeds 30 to 2500 rpm
Motor Hp/Kw 5HP/3.7KW
Power requirements 3 phase 415 volt
Overall dimensions 2.1m x 1m x 1.6m high
Approx. weight 1 ton

Features
Metric machine with metric dials
lever operated brake

Accessories
Self centring 3 jaw chuck
4 jaw independent chuck
Dog plate for turning between centre
Thread chasing dial
Taper turning attachment
Coolant system

We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job before purchase.

This milling machine is in our warehouse so please feel free to call us for more information & price or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or having machinery surplus to requirements, we would appreciate the opportunity to assist in any way we can.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

COLCHESTER MASTER 2500 CENTRE LATHE

We have a used Keiyo  Seiki KM 1800 Centre Lathe  for sale

On special price reduced to $3000+GST

While the machine is functional, we want to make sure youre fully informed about its condition. There is some wear on the slideways, & the main traverse handle has seen better days which has resulted in it being sloppy.

We take great care to provide accurate descriptions of our machines and want to ensure our customers have all the information they need to make an informed purchase decision. Due to the wear and tear on the lathe, we have reduced the price to reflect this issue.

Specifications are as follows

Swing over the bed 440mm
Swing over the saddle 240mm
Approx. swing in the gap 660mm
Distance between centres 1200mm
Spindle bore 50mm
Spindle mount, A Type Bolt On
Spindle speeds 30 to 1500 rpm
Machine voltage required 415 volt
Overall dimensions including coolant tank 2,350mm x 900mm x 1,450mm high
Weight 1.5 tons
Year of Manufacture 1968
Features

Imperial dials
Gap bed
Foot brake
Comes with the following accessories

3 Jaw chuck
Solid tool post
Travelling steady
Chuck guard
Coolant system
Work light
We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job prior to purchase.

This centre lathe is in our warehouse so please feel free to pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or have machinery that is surplus to requirements, we would appreciate the opportunity to assist in any way we can.

KEIYO SEIKI KM 1800

We have a Myford Small Double Swivel Plain Vertical Slide available for sale, in excellent used condition.
This versatile attachment is typically used for milling operations. A milling cutter is mounted in the chuck, while the workpiece is secured on the vertical slide table. Milling is then achieved by moving the lathe in the X, Y, and Z planes. The slide also features double swivels, allowing it to be set at compound angles. Although designed by Myford, this slide could likely be adapted for use on similarly sized lathes.
Specifications
Table size 125mm x 100mm
Imperial Dial Graduation
Allows Milling in your Myford Lathe
Table has 3 Precision Tee Slots
Table Size is approx 100mm of Vertical Movement
To give an idea of the approx overall size the dimensions of the unit set as per the photos are 100mm x 140mm x 220mm high

MYFORD MYFORD SMALL DOUBLE SWIVEL PLAIN VERTICAL SLIDE

We have in our stock a good used 250mm 3 Jaw Pneumatic Chuck

Please feel free to pay us a visit or  phone us for more information.

We are always interested in purchasing metalworking machinery & surplus equipment, if you have one machine or a quantity of machines you need gone, please feel free contact us here at Newmac Equipment

UNKNOWN PNEUMATIC 250MM 3 JAW CHUCK

We have a Mori Seiki MV Junior  Vertical Machining Centre for sale.

Stock # 4088

Specifications are as follows:

X/Y/Z Axis travel 560/410/460mm
Fanuc 10M-A CNC Control
Table Size 900 x 410mm
Spindle taper BT40
Max. spindle speed 4,000 rpm
Spindle motor power 5.5kW
Power requirements, 3 phase,  415 volt
Overall Machine Dimensions  2,000 x 2,145 x 2,480mm High
Weight 4 Tonne
Coolant Tank and Trasformer on Pallet 1,500 x 1,200 x 700mm High
Weight 200kgs

Comes with/accessories

Work light
20 position ATC
Transformer

We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment. We pride ourselves on providing exceptional customer service and believe that this personalized approach allows us to exceed your expectations.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

Considering selling your machinery?

We are always interested in purchasing metalworking machinery & surplus equipment, if you have one machine or a number of machines you need gone, please feel free contact us here at Newmac Equipment.

MORI SEIKI MV JUNIOR

We have a JF23 60A, 60 ton, C frame power press for sale.

Specifications are as follows

Nominal Pressure 600KN
Slide Stroke 101.6mm
No. of Strokes per minute 100
Max. Shut Height 362mm
Die Height Adjustment 76mm
Throat Depth 279mm
Weight 5 tons

This press is new old stock & has never been used.

Features pneumatic friction clutch

This JF23 60A C frame Power Press is in our warehouse, please feel free to call us for more information or pop in to inspect the machine at your convenience.

Are you thinking of selling your used or surplus equipment? Looking at Downsizing, Relocating, Closing Down or have machinery that is surplus to requirements. We are always looking for machinery to buy,  so would appreciate the opportunity to assist in any way we can.

We are always interested in purchasing metalworking machinery, if you have machines surplus to requirements or you are closing down, please feel free to contact us here at Newmac Equipment

SERVIAN JF23 60A C FRAME POWER PRESS

We have for sale a used EMF 7KVA Spotwelder:

Specifications are as follows:

Rating 7KVA
4600mm throat
415V 
Foot switch
Water Cooled
Dimensions for Transport 1200 x 550 x 1450mm (L x W x H)
Weight 300kg

For customers who wish to pay us a visit, we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job prior to purchase.

This Spot Welder is in our warehouse so please feel free to  pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or have machinery that is surplus to requirements, we would appreciate the opportunity to assist in any way we can.

EMF 7KVA

We have an excellent used condition Strathclyde Die Sinking EDM for sale

Specifications are as follows

Model:- T 50-40
Type:- Die Sinking electrical discharge machine
Control:-  Auto 10 step programmable controller
Work area tank size 1.2m x 0.65m x 0.4m deep
Work table size 800mm x 400mm
Amps 150
Machine Voltage 415 volt
Dimensions for Transport 3 Parts
Machine 1.5m x 1.8m x 2.2m high
Dielectric tank 1m x 1m x 1.1m high
Control cabinet 0.9m x 0.55m x 1.8m high
Machine Weight Approx. 1.75 tons
Year of manufacture 1998

Information on Die-sinking EDM?

Die-sinking machining, also known as sinker EDM or Die-sinking EDM, is a machining process to shape and form metal parts with high precision. It involves the use of electrical discharges, which materialize as sparks, to remove material from a workpiece.

A shaped electrode, often made of graphite or copper, will create a negative impression in the workpiece, usually consisting of a conductive material such as steel. The electrode and the workpiece are submerged in a dielectric fluid and a potential difference is applied between them. As the electrode approaches the workpiece, sparks jump across the gap, removing material from the workpiece and forming the desired shape.

This Strathclyde EDM is in our warehouse, please feel free to call for more information or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery, if you have machines surplus to requirements or you are closing down, please feel free to contact us here at Newmac Equipment

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

STATHCLYDE T 50-40

Find Plant and Equipment For Sale in Victoria. Browse 183 listings from Newmac Equipment.

New & Used Plant and Equipment For Sale in Victoria

Newmac Equipment

Sale Price

COLCHESTER TRIUMPH 2000 CENTRE LATHE

SULLAIR CHAMPION SULLAIR CSF 22 ROTARY SCREW AIR COMPRESSOR

DECKEL MAHO DMC 63V VMC

DURMA E3090 4 AXIS CNC HYDRAULIC PRESS BRAKE FOLDER

COLCHESTER MASTER 2500 CENTRE LATHE

KEIYO SEIKI KM 1800

MYFORD MYFORD SMALL DOUBLE SWIVEL PLAIN VERTICAL SLIDE

UNKNOWN PNEUMATIC 250MM 3 JAW CHUCK

MORI SEIKI MV JUNIOR

SERVIAN JF23 60A C FRAME POWER PRESS

EMF 7KVA

STATHCLYDE T 50-40

Newmac Equipment

Dealer Address