Newmac Equipment

DYNAVAC VACUUM TANK VACUUM TANK

We have a Diamant Boart Tile Saw for sale.

Specification are as follows

Model Diamant Boart
Manual Traversing Table
Table size 440mm x 400mm
Requires 3 phase 415 volt power
Single Speed
Bench Size 1230 x 650 x 860mm (L X W xH)
Testing of Machinery  Try Before You Buy

We are happy to test run machinery in our warehouse, that way it gives you piece of mind that the machine will do your job prior to purchase.

This machine is in our warehouse so feel free to pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery, if you have machines surplus to requirements or you are closing down, please feel free to contact us here at Newmac Equipment

DIAMANT BOART DIAMAND SAW

We have a Servex Vertical Air Compressor for sale.

This compressor is in our warehouse so please feel free to call us for more information or pop in to inspect the machine at your convenience.

SERVEX AIR COMPRESSOR

We have for Sale in working order a Herless 20KVA Resistance Spot Welder

Specifications are as follows:

20 KVA
2.5 x 2.5mm Maximum Steel Sheet Metal thickness
540mm throat
415V Single Phase
Foot switch
Water Cooled

For customers who wish to pay us a visit, we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job prior to purchase.

This Spot Welder is in our warehouse so please feel free to pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or have machinery that is surplus to requirements, we would appreciate the opportunity to assist in any way we can.

HERLESS AP797

We have a very good used condition, Sunderland model 27SDH gear planner for sale

Specification & info as follows:

The machine is very well equipped 
1. One head/slide for cutting Spur/single helical gears  max face width 380mm (15) / max pitch 1 DP (25 Mod)
a. For single helical gears the max. helical angle is + or  30 deg.
2. One head/slide for double helical gears  max face width 380mm (15) / max pitch 1.5 DP ( 16 Mod) / helical angle 30 deg.
3. Two cutter heads  single acting and double acting
4. Rim/work steady rests for cutting large diameter gears
5. Change gears  full set (approx. 60 gears)
6. Speed gears (for different cutting speeds)  5 sets
7. Cutting trips  5 or 6 for different length faces (up to 15 face)
8. 4 and 6 work arbours with bushes for outer work support
9. Operation manual and work charts (for spurs/helicals and double helical gears)

Machine serial number: BB471  it was built in the mid 1960s 

Please note this machine is not in our warehouse, but we are happy to arrange an appointment for inspection of the machine if required.

Please feel free to call us for more information

We are always interested in purchasing metalworking machinery & surplus equipment, if you have one machine or a quantity of machines you need gone, please feel free contact us here at Newmac Equipment.

SUNDERLAND NO.27 GEAR PLANNER

We have a Servian SA11 Bench Drilling Machine for sale

Stock # 4071

Specifications are as follows

Table size 215 x 300mm
Max drilling capacity in Mild Steel 13mm
Distance from centre of the spindle to the column 200mm
Morse taper MT2
Quill travel 100mm
Motor 0.25hp
Power requirements 240 volt
Overall dimensions 700mm x 320mm x 1160mm high
Weight 100kg

Accessories
13mm Drill Chuck

We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment, knowing youre making a smart choice for your business.

Considering selling your machinery? We buy as well as sell machinery. Downsizing, relocating, closing down, or having surplus equipment. We are always on the lookout for quality machinery to buy. Please do not hesitate to contact us to discuss your machinery needs and how we can help you. Your success is our priority.

We want to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance. Your peace of mind is essential to us, and were here to support you every step of the way.

SERVIAN SA11

We have a Crown 15BS64A Walkie Stacker Forklift for sale.

Specifications
Capacity 700kgs at 500mm Load Centre
Max lift height 1620mm

This Crown walkie stacker is in good working condition.

We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment. We pride ourselves on providing exceptional customer service and believe that this personalized approach allows us to exceed your expectations.

Considering selling your machinery?
Downsizing, relocating, closing down, or having surplus equipment, we would be pleased to assist you. We are always on the lookout for quality machinery to buy and can offer you a fair price for your equipment. Our team of experts will work with you to ensure a smooth and hassle-free process, taking care of everything from inspection to transportation. We are committed to providing our customers with exceptional service and value transparency and honesty in all of our dealings. Please do not hesitate to contact us to discuss your machinery needs and how we can help you. We look forward to hearing from you.

CROWN 15BS64A

We have in good condition an Australian Made Hebco 27/9 Pedestal Grinder

300mm x 50mm Wheel Diameter
Three Phase 415 Volt Motor

We have run this machine & all works well.

We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job prior to purchase.

This drilling machine is in our warehouse so please feel free to  pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or having machinery that is surplus to requirements, we would appreciate the opportunity to assist in any way we can.

A note to all prospective customers. We are happy to get freight quotes anywhere in Australia or worldwide. If the sale of any machine goes ahead, please note the machines are not insured during transport by either the transport companies or Newmac Equipment. It is advised customers talk to their usual insurance company to take out transport insurance.

HEBCO 27/9

We have a  good used condition, ESAB Speeder Compact 400 Mig welder for sale.

Duty rating 400amps at 35% duty cycle
Power requirements 415 volt, 3 phase
Click here for a printable (pdf) report & price, which will open in a new tab

We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job prior to purchase.

Please feel free to pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or having machinery that is surplus to requirements, we would appreciate the opportunity to assist in any way we can.

A note to all prospective customers. We are happy to get freight quotes anywhere in Australia or worldwide. If the sale of any machine goes ahead, please note the machines are not insured during transport by either the transport companies or Newmac Equipment. It is advised customers talk to their usual insurance company to take out transport insurance.

ESAB SPEEDER COMPACT 400

We have a Russian built Stankoimport 6P 82 III Universal milling machine for sale 

Stock # 4032

Specifications are as follows

Table size 1,250mm x 320mm
XYZ travels 800 x 240 x 410mm
Features power feeds on XY&Z axis
Vertical head spindle speeds 50 to 1600 rpm
Horizontal spindle speeds 31.5 to 1600 rpm
Spindle tapers vertical NT40, horizontal NT50
Horizontal Spindle Motor 7.5kw
Machine Voltage 415 volt
Overall dimensions 2,470 x 1,950 x 1,950mm (High)
Weight 3.3 tonnes

Comes with the following accessories

2 horizontal arbor supports
2 horizontal arbors
90 Degree Milling Head
NT50 to NT40 Spindle Adapter
NT 50 and NT 40 Toolholders


We have run this machine & all is working, although it can be difficult to select & change feed rates. We have sold approximately 10 of these machines over the years & they have all been the same, so this is typical of these machines.

In addition to this Universal milling machine, our warehouse proudly houses one of the largest inventories of used machinery in the country. We invite you to explore our website, where we consistently update our stock, offering a great selection of engineering machinery and equipment for sale.

We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment.

Considering selling your machinery? We buy as well as sell machinery. Downsizing, relocating, closing down, or having surplus equipment. We are always on the lookout for quality machinery to buy. Please do not hesitate to contact us to discuss your machinery needs and how we can help you.

We would like to extend a note to all prospective customers. We are happy to provide freight quotes for machines to be shipped anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

STANKOIMPORT 6P 82 III

We have an Engish-made Broomwade air compressor for sale

Power requirements 240 volt
Motor 1.5HP/1.1KW
Overall dimensions 1300mm x 450mm x 900mm high
Weight approx 150kgs

We have run this compressor & it pumps up to pressure

We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job prior to purchase.

Please feel free to call us for more information & price or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or having machinery that is surplus to requirements, we would appreciate the opportunity to assist in any way we can.

A general note to all prospective customers. We are happy to get freight quotes anywhere in Australia or worldwide. If the sale of any machine goes ahead, please note the machines are not insured during transport by either the transport companies or Newmac Equipment. It is advised customers talk to their usual insurance company to take out transport insurance.

BROOMWADE AC 5-7 AIR COMPRESSOR

We have a Omes MEC 350 Cold Saw for sale

Good working condition

Specifications
Max cutting size round at 90° with new blade 115mm
Power requirements three phase 415V

Features
Quick action vice
Mitering cutting left & right
Coolant system
3 speed motor

Please feel free to inspect machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment.

Considering selling your machinery? We buy as well as sell machinery. Downsizing, relocating, closing down, or having surplus equipment. We are always on the lookout for quality machinery to buy. Please do not hesitate to contact us to discuss your machinery needs and how we can help you.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

OMES MEC 350 COLD SAW

Find Plant and Equipment For Sale in Victoria. Browse 173 listings from Newmac Equipment.

New & Used Plant and Equipment For Sale in Victoria

Newmac Equipment

Sale Price

DYNAVAC VACUUM TANK VACUUM TANK

DIAMANT BOART DIAMAND SAW

SERVEX AIR COMPRESSOR

HERLESS AP797

SUNDERLAND NO.27 GEAR PLANNER

SERVIAN SA11

CROWN 15BS64A

HEBCO 27/9

ESAB SPEEDER COMPACT 400

STANKOIMPORT 6P 82 III

BROOMWADE AC 5-7 AIR COMPRESSOR

OMES MEC 350 COLD SAW

Newmac Equipment

Dealer Address