Newmac Equipment

We have a Sahliner IK 1.2 Manual Swage and Jenny for sale

Specifications are as follows

Heavy duty cast iron construction
Adjustable material side support
Throat Depth 150mm
Mild Steel Capacity 1.2mm
Mild steel capacity is rated on hot rolled material with 250MPA
5 sets of rolls
Made in Turkey

Includes
1 x 4mm wiring rolls
1 x 6mm wiring rolls
1 x 7mm wiring rolls
1 x 9mm wiring rolls
1 x 10mm wiring rolls

In addition to this Swage and Jenny, our warehouse proudly houses one of the countrys largest inventories of used machinery. We invite you to explore our website, where we consistently update our stock, offering a great selection of engineering machinery and equipment for sale.

We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment.

Considering selling your machinery? We buy as well as sell machinery. Downsizing, relocating, closing down, or having surplus equipment. We are always on the lookout for quality machinery to buy. Please do not hesitate to contact us to discuss your machinery needs and how we can help you.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

SAHINLER IK 1.2

We have a good used condition, Ex TAFE,  MG-432 Mechanical Guillotine for sale

Specifications are as follows
Cutting Capacity: 1250 mm width x 3 mm thickness (mild steel)
Drive System: Mechanical (flywheel-driven)
Motor: 3 kW, 415V three-phase
Stroke Rate: Approximately 33 strokes per minute
Backgauge: Manual wind-out, 635 mm travel, with mechanical counter
Operation: Foot pedal control
Safety Features: Rear guard fitted with a safety micro switch
Weight: Approximately 1200 kg
Dimensions 1100mm high, 1700mm wide, 2100mm front to back with front supports fitted (1450mm removed)

Features
Front sheet supports and material squaring edge
Internally lighted for material viewing
Hinged rear gate with gas strut support for easy access

Weve taken sample cuts on this MG-432 mechanical guillotine, and it performs very well  producing clean, accurate cuts with no noticeable burrs. We always recommend customers visit our warehouse to inspect machines in person. Were more than happy to demonstrate the machine under power, giving you peace of mind that it will suit your application before purchase.

This machine is located in our warehouse and is available for immediate inspection. For more information or pricing, please feel free to contact us or drop in at your convenience.

Looking to Sell Machinery?
We are always seeking quality metalworking machinery and surplus equipment. Whether you are downsizing, relocating, closing down, or simply have equipment thats no longer required, wed welcome the opportunity to discuss how we can assist.

Transport Information
We are happy to provide contact details for reliable freight companies who can deliver machinery anywhere across Australia or internationally. However, please note that neither Newmac Equipment nor the freight providers insure machinery during transit. We strongly recommend arranging transport insurance through your own insurer for peace of mind.

METALMASTER MG-432 MECHANICAL GUILLOTINE

We have a good condition, Ex school, Waldown Workmax MK1 Pedestal Drill for sale.

This Waldown pedestal drilling machine features a 360° tilting table, a rigid steel quill with bearings, a ground steel column, and a 0.5hp single phase motor, making it idea for an industrial workshop or home hobbyist. This model was designed with a baked enamel finish & unlike the later models has a quality steel pully cover.

Specifications are as follows
Table size 240mm x 270mm
Distance from the centre of the spindle to the column 195mm
Distance from the table to spindle nose min/max 0  1260mm
Spindle Speeds 500 to 4,000 RPM
Morse taper # MT2
Motor Hp/Kw 0.5HP/0.37KW
Power requirements 240 volt
Overall dimensions 650mm x 300mm x 1900mm high
Weight Approx. 150kgs

We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job before purchase.

This milling machine is in our warehouse so please feel free to call us for more information or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or having machinery surplus to requirements, we would appreciate the opportunity to assist in any way we can.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

WALDOWN WORKMAX MK1 PEDESTAL DRILL

We have for sale an Eutectic + Castolin Airlux Fume Eliminator:

The fume extractor is in running condition and will assist in fume elimination while welding.

Selling in as is condition.


We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job before purchase.

This fume extractor is in our warehouse so please feel free to pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or having machinery surplus to requirements, we would appreciate the opportunity to assist in any way we can.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

CASTOLIN EUTECTIC AIRLUX

We have an Induma Universal milling machine for sale.

Stock # 4152

Specifications are as follows

Table size 1,070mm x 200mm
XYZ travel 600 / 250 / 500 mm approx
12 Spindle speeds 40 to 1600rpm
NT40 Spindle Taper
Spindle Motor  3.5HP
Power requirements 415 volt, 3 phase
Overall dimensions 1.4m x 1.7m x 1.7m High
Weight 1.5 Tonne
Features/Accessories

X and Y Power Feed
Arbor Support
Coolant system
Slotting attachment

We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment.

Are you considering selling your machinery?

We buy as well as sell machinery. Downsizing, relocating, closing down, or having surplus equipment. We are always on the lookout for quality machinery to buy. Please do not hesitate to contact us to discuss your machinery needs and how we can help you.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

INDUMA UNIVERSAL MILL

We have a Woodfast Planer/Jointer for sale.
Cutter width 150mm
Table size 1200 x 170mm
415V Three Phase
Dimensions for Transport 1200 x 500 x 960mm High
Weight 100kg

We have test run this machine in our warehouse & all is in  working condition. For customers who wish to pay us a visit, we are happy to test run machinery, that way it gives you peace of mind that the machine will do your job prior to purchase

WOODFAST PLANER JOINTER

We have a Ryobi R502 Router on a Draco Router Bench for sale.

1/2 Collet Capacity
1/2 Router Bit
Draco Router Bench
240V Single Phase
Dimensions for Transport 700 x 500 x 1,130mm High
Weight 40kg

We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job before purchase.

This machine is in our warehouse so please feel free to pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or having machinery surplus to requirements, we would appreciate the opportunity to assist in any way we can.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

RYOBI R502

We have a used condition Hydracut 3mm x 2500mm Fixed Rake Hydraulic Guillotine for sale.
Stock # 4200
Specifications
Mild steel capacity 2.5m x 3mm
Power requirements 3 phase, 415 volt
Overall dimensions (l x w x h) 3000 mm x 1450 mm x 1700 mm
Weight 4.0 tons approx
Accessories/features
Hydraulic hold down
Manual back gauge
We have had this guillotine running & all works well
This guillotine is in our warehouse so please feel free to pop in to inspect the machine at your convenience.
We are always interested in purchasing metalworking machinery, if you have machines surplus to requirements or you are closing down, please feel free to contact us here at Newmac Equipment.
We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

HYDRACUT 3MM X 2500MM

We have an excellent used condition, Spanish made, Tejero 32A Tube Bending Machine for sale.

Capacity on round steel tubing 32mm x 1.5mm  Maximum wall thickness.

Semi automatic operation.

Comes with tooling in photos. If you have trouble ready any details on the photos please visit our own web site where we have much higher resolution photos. Google Newmac Equipment & you will find us.

Testing of Machinery  Try Before You Buy

We are happy to test run machinery in our warehouse, that way it gives you piece of mind that the machine will do your job prior to purchase.

This tube bender is in our warehouse so please feel free to call us for more information or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment, if you have one machine or a quantity of machines you need gone, please feel free contact us here at Newmac Equipment.

TEJERO 32A TUBE BENDING MACHINE

We have a Unimig Craft 200 MIG Welder for sale

Specifications are as follows

200 Amp Max Welding Current 
Power requirements,  240 volt
Dimensions 1100 x 460 x 740mm High
Weight approx 70kgs

Comes with

Inbuilt wire feed unit
MIG gun
Earth wire
Gas regulator


In addition to this MIG welder, our warehouse proudly houses one of the largest inventories of used machinery in the country. We invite you to explore our website, where we consistently update our stock, offering a great selection of engineering machinery and equipment for sale.

We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment.

Considering selling your machinery? We buy as well as sell machinery. Downsizing, relocating, closing down, or having surplus equipment. We are always on the lookout for quality machinery to buy. Please do not hesitate to contact us to discuss your machinery needs and how we can help you.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

UNI-MIG CRAFT 200

We have an Ex TAFE, Carba-tec TSC 10HBR Tilting Arbor table saw for sale.

Stock # 4186

The Carba-tec THC 10BR is a woodworking machine designed for the precision cutting of  panels and sheet materials. It features a 260mm main saw blade.

Specifications are as follows

260mm Diameter Saw Blade
Table Size 1,020mm x 685mm
Max Cut width 760mm
Max wood thickness 70mm
Dimensions for transport 1,450 x 900 x 1,000mm High
Weight 100kg

We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment.

Considering selling your machinery? We buy as well as sell machinery. Downsizing, relocating, closing down, or having surplus equipment. We are always on the lookout for quality machinery to buy. Please do not hesitate to contact us to discuss your machinery needs and how we can help you.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

CARBATEC TSC 10 HBR

New Arrival  Gear Hobbing & Related Machines Now in Stock

Weve recently taken delivery of a substantial range of used gear hobbing machines, shapers, and related gear manufacturing equipment. These machines are now in our Bayswater North warehouse and available for inspection.

Please note: this is a fresh arrival, and at present we have limited information on each machine. The shipment includes several stillages containing gears, accessories, and books, which we will gradually sort and catalogue. As we are currently short-handed, this will be a slow process.

Machines Currently in Stock:
HOLROYD 40 Gear Hobber (England, c.1951)

Model: 40 | Operational: Yes | Manuals: Yes

LORENZ Gear Hobber (Germany)

Model: E12 | Serial No: 6292 | Capacity: 1 MOD12 MOD | Operational: Yes | Manuals: Not found yet

C.I.M.A. S.p.A. Gear Hobber (Italy)

Model: P.5 | Serial No: 503 | Operational: Yes | Manuals: Yes

TOS Gear Hobbing Machine (Czech Republic, 1951)

Model: FO-6 | Serial No: 041314 | Operational: Yes | Manuals: Yes

GLEASON 12 Straight Bevel Gear Generator (USA)

Model: 12 | Serial No: 18561 | Operational: Yes | Manuals: Yes

FELLOWS High Speed Gear Shaper (USA)

Model: 7 | Operational: Yes | Manuals: Yes

FELLOWS Gear Shaper (USA)

Model: TBC | Serial No: TBC | Operational: Yes | Manuals: Yes

PFAUTER Gear Hobber (Germany)

Model: TBC | Serial No: TBC | Operational: TBC | Manuals: TBC

MATRIX No. 37 Auto-Indexing Worm Grinding Machine (England)

Model: 37 | Max Diameter: 14 | Operational: Yes | Manuals: Yes

These machines are offered as-is, with more detailed specifications and pricing to follow as we sort through the associated tooling and documentation.

VARIOUS GEAR HOBBING & RELATED MACHINES

Find Plant and Equipment For Sale in Victoria. Browse 180 listings from Newmac Equipment.

New & Used Plant and Equipment For Sale in Victoria

Newmac Equipment

Sale Price

SAHINLER IK 1.2

METALMASTER MG-432 MECHANICAL GUILLOTINE

WALDOWN WORKMAX MK1 PEDESTAL DRILL

CASTOLIN EUTECTIC AIRLUX

INDUMA UNIVERSAL MILL

WOODFAST PLANER JOINTER

RYOBI R502

HYDRACUT 3MM X 2500MM

TEJERO 32A TUBE BENDING MACHINE

UNI-MIG CRAFT 200

CARBATEC TSC 10 HBR

VARIOUS GEAR HOBBING & RELATED MACHINES

Newmac Equipment

Dealer Address