Newmac Equipment

We have a Polish made, Tarnow TUJ 48 x 2500 centre lathe for sale

Specifications are as follows

Swing Over Bed 520mm
Swing Over Saddle 330mm
Swing in Gap approximately 700mm
Distance between centres 2.5m
Spindle mount D1-6
Spindle Speeds 22.5 to 1120 rpm
Motor Hp/Kw Two speed motor 6.7/4KW 9/5.4HP
Power requirements 415 volt 3 phase
Overall dimensions 4.1m x 1.2m x 1.3m high
Weight 2.5 tons

Comes with the following accessories

250mm self centring 3 jaw chuck
German made (RoHm) 400mm independent 4 jaw chuck
Solid 4 way tool post
Fixed Steady
Thread chasing dial
Collant system

Features

Imperial dials

For customers who wish to pay us a visit, we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job prior to purchase.

This centre lathe is in our warehouse so please feel free to call us for more information or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment, if you have one machine or a quantity of machines you need gone, please feel free contact us here at Newmac Equipment

TARNOW TUJ 48 X 2500 CENTRE LATHE

We have a CIG Transmig 275 Mig Welder  for sale

For customers who wish to pay us a visit, we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job prior to purchase.

This Mig Welderis in our warehouse so please feel free to call us for more information & price or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment, if you have one machine or a quantity of machines you need gone, please feel free contact us here at Newmac Equipment

CIG TRANSMIG 275 MIG WELDER

We have a Omes MEC 350 Cold Saw for sale

Good working condition

Specifications
Max cutting size round at 90° with new blade 115mm
Power requirements three phase 415V

Features
Quick action vice
Mitering cutting left & right
Coolant system
3 speed motor

Please feel free to inspect machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment.

Considering selling your machinery? We buy as well as sell machinery. Downsizing, relocating, closing down, or having surplus equipment. We are always on the lookout for quality machinery to buy. Please do not hesitate to contact us to discuss your machinery needs and how we can help you.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

OMES MEC 350 COLD SAW

We have an excellent used condition, Australian made, Paulcall RS 4H Radial Arm Saw for sale. 

Specifications

Cross Cut Capacity 300mm
Spindle Speed 3,480rpm
Table size 910mm x 520mm
Max Depth of Cut 90° 80mm
Max Depth of Cut 45° 50mm
Mitre Positive Stops 45°/0°/-45°
Saw Head Swivel 90° /0°/-90°
Overall dimensions 900mm x 950mm x 1600mm high
Weight approx 100kgs
Requires 240 volt, single phase power
Motor Power 1.25hp

We have test run this Radial Arm Saw in our warehouse & all is in  working condition. For customers who wish to pay us a visit, we are happy to test run machinery, that way it gives you peace of mind that the machine will do your job prior to purchase

This Radial Arm Saw is in our warehouse so please feel free to pop in to inspect the machine at your convenience.

PAULCALL RS 4H

We have for sale a good used, Australian made H.C. Horton mechanical guillotine for sale.

Capacity 920mm x 1.6mm mild steel

This machine is in our warehouse & can be seen under power so please feel free to call us for more information or pop in to inspect the machine at your convenience.

Newmac Equipment is a proudly Australian owned company founded in 1983, we supply many industries with quality second hand and new products, Please add Newmac Equipment to your favourite sellers list and visit our store when looking for quality products. We have our own web site where we regularly update our stock & have lots more engineering machinery & equipment for sale. Just google Newmac Equipment & you will find us. Call us for more information, you are also welcome to pay us a visit at our Bayswater North warehouse, see details below.

Newmac Equipment Pty Ltd,
10 Stephenson Rd,
Bayswater North,
Victoria 3153,
Our regular opening hours are 
Monday to Friday 8.30 to 4.45pm.

H.C. HORTON 920MM X 1.6MM MACHANICAL GUILLOTINE

We have a Diamant Boart Tile Saw for sale.

Specification are as follows

Model Diamant Boart
Manual Traversing Table
Table size 440mm x 400mm
Requires 3 phase 415 volt power
Single Speed
Bench Size 1230 x 650 x 860mm (L X W xH)
Testing of Machinery  Try Before You Buy

We are happy to test run machinery in our warehouse, that way it gives you piece of mind that the machine will do your job prior to purchase.

This machine is in our warehouse so feel free to pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery, if you have machines surplus to requirements or you are closing down, please feel free to contact us here at Newmac Equipment

DIAMANT BOART DIAMAND SAW

We have an excellent used condition FHC 315D Cold Cut Saw for sale

Specifications related to this cold cut saw are as follows
Origin Made in Taiwanese
Approx. cutting capacities Round Capacity  90º / 45º 100mm/ 90mm
Square Capacity  90º / 45º 82mm / 75mm
Rectangle Capacity  90º / 45º (WxH)110mm x 70mm / 85mm x 70mm
Blade size 315mm
Number of cutting speeds 2
Mitre angles + &  45°
Machine Voltage 415 volt
Overall dimensions 650mm x 950mm x 1800mm high
Machine Weight 250kgs
Material length stop included

We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will meet your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment, knowing youre making a smart choice for your business.

Considering selling your machinery? We buy as well as sell machinery. Downsizing? relocating? closing down?or having surplus equipment. We are always on the lookout for quality machinery to buy. Please do not hesitate to contact us to discuss your machinery needs and how we can help you. Your success is our priority.

We want to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise customers to take out transport insurance with their usual insurance company. Your peace of mind is essential to us, and were here to support you every step of the way.

FONG HO FHC 315D COLD CUT SAW

We have a  good used condition, ESAB Speeder Compact 400 Mig welder for sale.

Duty rating 400amps at 35% duty cycle
Power requirements 415 volt, 3 phase
Click here for a printable (pdf) report & price, which will open in a new tab

We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job prior to purchase.

Please feel free to pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or having machinery that is surplus to requirements, we would appreciate the opportunity to assist in any way we can.

A note to all prospective customers. We are happy to get freight quotes anywhere in Australia or worldwide. If the sale of any machine goes ahead, please note the machines are not insured during transport by either the transport companies or Newmac Equipment. It is advised customers talk to their usual insurance company to take out transport insurance.

ESAB SPEEDER COMPACT 400

We have a high-quality, excellent used condition, German made, Rohm 160mm 4 Jaw Self Centring & Independent Chuck for sale
Specifications are as follows
Origin Made in German
160mm Ø
Designed so it can be used in self-centring or independent mode
Backplate mount

ROHM 160MM 4 JAW SELF CENTRING & INDEPENDENT LATHE CHUCK

Myford Super 7 Bench Lathe for sale

Specifications are as follows
Swing Over Bed 178mm (7)
Swing Over Saddle 105mm (4-1/8)
Swing in Gap 254mm (10)
Distance between centres 483mm (19)
Spindle Bore 15mm (19/32)
Spindle Speeds 25 to 2150 rpm
Power requirements 240 volt

We have run the lathe, all works well. This lathe would be perfect for a home hobbyist or small workshop.

We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment, knowing youre making a smart choice for your business.

Are you considering selling your machinery? We buy as well as sell machinery. Downsizing? relocating? closing down? or having surplus equipment. We are always on the lookout for quality machinery to buy. Please do not hesitate to contact us to discuss your machinery needs and how we can help you. Your success is our priority.

We want to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance. Your peace of mind is essential to us, and were here to support you every step of the way.

MYFORD SUPER 7 BENCH LATHE

We have SIP Supermig 225 DP MIG Welder is offered for sale, with an inbuilt feeder, obtained from Melbourne University. This Italian-made quality welder is in excellent used condition.

Specifications are as follows
225 Amp Max Welding Current 
Power requirements, 15amp 240 volt
Dimensions 1.2m x 0.5m x (0.8m high main unit) (1.8m high with cable support)
Weight approx 100kgs

Comes with
Inbuilt wire feed unit
MIG gun
Earth wire


In addition to this MIG welder, our warehouse proudly houses one of the largest inventories of used machinery in the country. We invite you to explore our website, where we consistently update our stock, offering a great selection of engineering machinery and equipment for sale.

We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment.

Considering selling your machinery? We buy as well as sell machinery. Downsizing, relocating, closing down, or having surplus equipment. We are always on the lookout for quality machinery to buy. Please do not hesitate to contact us to discuss your machinery needs and how we can help you.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

SIP SUPERMIG 225 DP MIG WELDING MACHINE

We have a Leyland Gifford pedestal drilling machine for sale.

Specifications are as follows

Working area of the table 590mm x 525mm
Distance from the Column to the centre of the spindle 250mm
Spindle taper MT2
Spindle speeds 75 to 1500 rpm
Weight approx 750kgs
Overall dimensions 770mm x 1100mm x 2400mm high
Drill is in working condition but auto feeds are inoperable

For customers who wish to pay us a visit, we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job prior to purchase.

This geared head drill is in our warehouse so please feel free to call us for more information & price or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or have machinery that is surplus to requirements, we would appreciate the opportunity to assist in any way we can.

LEYLAND GIFFORD PEDESTAL DRILL

Find Engineering - Fabrication For Sale. Browse 195 Engineering - Fabrication listings from Newmac Equipment.

New & Used Engineering - Fabrication For Sale in Australia

Newmac Equipment

Sale Price

TARNOW TUJ 48 X 2500 CENTRE LATHE

CIG TRANSMIG 275 MIG WELDER

OMES MEC 350 COLD SAW

PAULCALL RS 4H

H.C. HORTON 920MM X 1.6MM MACHANICAL GUILLOTINE

DIAMANT BOART DIAMAND SAW

FONG HO FHC 315D COLD CUT SAW

ESAB SPEEDER COMPACT 400

ROHM 160MM 4 JAW SELF CENTRING & INDEPENDENT LATHE CHUCK

MYFORD SUPER 7 BENCH LATHE

SIP SUPERMIG 225 DP MIG WELDING MACHINE

LEYLAND GIFFORD PEDESTAL DRILL

Newmac Equipment

Dealer Address