Newmac Equipment

We have a used Keiyo  Seiki KM 1800 Centre Lathe  for sale

On special price reduced to $3000+GST

While the machine is functional, we want to make sure youre fully informed about its condition. There is some wear on the slideways, & the main traverse handle has seen better days which has resulted in it being sloppy.

We take great care to provide accurate descriptions of our machines and want to ensure our customers have all the information they need to make an informed purchase decision. Due to the wear and tear on the lathe, we have reduced the price to reflect this issue.

Specifications are as follows

Swing over the bed 440mm
Swing over the saddle 240mm
Approx. swing in the gap 660mm
Distance between centres 1200mm
Spindle bore 50mm
Spindle mount, A Type Bolt On
Spindle speeds 30 to 1500 rpm
Machine voltage required 415 volt
Overall dimensions including coolant tank 2,350mm x 900mm x 1,450mm high
Weight 1.5 tons
Year of Manufacture 1968
Features

Imperial dials
Gap bed
Foot brake
Comes with the following accessories

3 Jaw chuck
Solid tool post
Travelling steady
Chuck guard
Coolant system
Work light
We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job prior to purchase.

This centre lathe is in our warehouse so please feel free to pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or have machinery that is surplus to requirements, we would appreciate the opportunity to assist in any way we can.

KEIYO SEIKI KM 1800

We have a Yunnan CY S1760G Centre Lathe for sale

Specifications are as follows
Swing Over Bed 410mm
Swing Over Saddle 230mm
Swing in Gap Approx 640mm
Distance Btw Ctrs 1.5m
Spindle Bore 58mm
Spindle mount Camlock D1-6
Spindle Speeds 20 to 2000 rpm
Power requirements 3 phase, 415 volt
Overall dimensions 2.7m x 1.05m x 1.6m high
Approx. weight 2 tons
The lathe features an imperial lead screw, but the dials have both metric & imperial divisions

Accessories
3 & 4 Jaw chuck
Dog plate for turning between centres
Jenix 2 axis digital read out (tested & working)
Quick change tool post
Fixed Steady
Travelling Steady
Thread Chasing Dial
Foot Brake Pedal tested & working
Coolant System, can be heard running

We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job before purchase.

This milling machine is in our warehouse so please feel free to call us for more information & price or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or having machinery surplus to requirements, we would appreciate the opportunity to assist in any way we can.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

YUNNAN CY S1760G CENTRE LATHE

We have a good working condition, Mori Seiki SL 25 CNC lathe for sale

Model SL-25B/1000, see photos for full specifications.

Features 
C axis & live tooling

Accessories
Hydraulic bar feed unit

This 1989 machine has a total of 22370 machining hours, equating to an average of 12.5 hours of use each week.

For higher-resolution photos look up the machine on our own .  Newmac Equipment to find us.

We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job before purchase.

This CNC lathe is in our warehouse so please feel free to call us for more information & price or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or having machinery surplus to requirements, we would appreciate the opportunity to assist in any way we can.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

MORI SIKI SL 25 CNC LATHE

We have a Nakamura Tome TMC 20L CNC lathe for sale

Specifications are as follows
Control Fanuc Series 15T
Spindle nose A2-5
Spindle speed range 45 to 4500 rpm
Main motor HP/KW 7.5/11
Max cutting dia 220mm
Max length of work 600mm
Hole through spindle 55mm
Supply voltage needed 415 volt
Overall dimensions Machine with chip conveyor 3.2m x 1.9m x 1.9m high. Transformer 0.5m x 0.6m x 0.55m high
Barfeed 5.8m x 1m x 1.25m high
Weight Machine approx 3.5 tons, Barfeed 400kgs
Year of Manufacture 1989

Accessories included
Chip conveyor
Bartec hydrodynamic barfeed unit
Collet chuck

Features
8 station tool turret
Coolant system
Worklight

We have run this CNC lathe & taken a short video which is posted on our own web site www.newmac.com.au

We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment. We pride ourselves on providing exceptional customer service and believe that this personalized approach allows us to exceed your expectations.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

Considering selling your machinery?

We are always interested in purchasing metalworking machinery & surplus equipment, if you have one machine or a number of machines you need gone, please feel free contact us here at Newmac Equipment.

NAKAMURA TOME TMC 20L CNC LATHE

We have a Kiriu Kikai LS-3 turret lathe for sale

Specifications

Swing over the bed 450mm
Swing over the saddle 385mm
Swing over the cross slide 210mm
Max. machining length 200mm
Spindle speeds 85 to 2200 rpm
Spindle bore 52mm

We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job prior to purchase.

This centre lathe is in our warehouse so please feel free to call us for more information or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or have machinery that is surplus to requirements, we would appreciate the opportunity to assist in any way we can

KIRIU KIKAI LS-3 TURRET LATHE

We have a Harrison Alpha 330 Plus  CNC Teach lathe for sale

Stock # 4079

Specifications are as follows

Fanuc Control
Spindle Nose D1-4 Camlock
Spindle speed range 0 to 3500 rpm
Main motor HP/KW 7.5/10
Max Turning Dia 330mm
Max Turning length 1000mm
Hole through spindle 42mm
Supply voltage needed 415 volt
Overall dimensions Machine  2040mm x 1200mm x 1550mm High
Weight Machine approx 1200kgs
Year of Manufacture 1999

Accessories included

Quick Change Toolpost and tool holders
3 Jaw and 4 Jaw Chuck
Travelling Steady Rest

Features
Teach in Software
Coolant system
Worklight

We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment. We pride ourselves on providing exceptional customer service and believe that this personalized approach allows us to exceed your expectations.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

Considering selling your machinery?

We are always interested in purchasing metalworking machinery & surplus equipment, if you have one machine or a number of machines you need gone, please feel free contact us here at Newmac Equipment.

HARRISON ALPHA ALPHA 330 PLUS

We have a CY-L1640G centre lathe for sale

Specifications are as follows

Swing over the bed 400mm
Swing over the saddle 140mm
Swing in the gap approx. 640mm
Distance between centres 1m
Spindle bore 54mm
Spindle speeds 33 to 2000 rpm
Spindle mount Camlock D1-6
Machine power requirement 415 volt
Overall dimensions 2.1m x 1m x 1.4m high
Weight 1.5 tons

Comes with the following accessories

3 Jaw chuck
4 Jaw chuck
Face plate
Thread chasing dial
Solid tool post
Coolant system
Work light
Foot brake

We have run this lathe & all works well, but for customers who wish to pay us a visit, we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job prior to purchase.

This centre lathe is in our warehouse so please feel free to call us for more information & price or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or have machinery that is surplus to requirements, we would appreciate the opportunity to assist in any way we can.

HERLESS CY L1640G ENTRE LATHE

We have a good used Shenyang CA6261B centre lathe for sale

Specifications related to this centre lathe are as follows
YOM 1994
Swing Over Bed 610mm
Swing Over Saddle 360mm
Swing in Gap Approx. 840mm
Distance Btw Ctrs 1.5m
Spindle Bore 80mm
Spindle mount Camlock D1-8
Spindle Speeds 10 to 1400 rpm
Main motor HP/KW 10hp/7.5kw
Power requirements 3 phase 415 volt
Overall dimensions 3m x 1.3m x 1.7m high
Approx. weight Approx. 2.8 tons
Features metric lead screw & dials

Accessories
3 jaw chuck
4 jaw chuck
Face plate included
Jenix 2 axis DRO (checked & working)
4 way solid tool post
Fixed Steady
Travelling Steady
Thread Chasing Dial
Foot Brake Pedal which switches the machine off only, not a brake
Coolant System

Features
Button operated rapid traverse & cross (checked & working)

Condition
Mechanically working. Ways look to be in good condition.

Faults  If Any
Headstock has an oil leak. (Will be looked at & fixed before sale)

We have run this lathe & all works well.

We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment.

Considering selling your machinery? We buy as well as sell machinery. Downsizing, relocating, closing down, or having surplus equipment. We are always on the lookout for quality machinery to buy. Please do not hesitate to contact us to discuss your machinery needs and how we can help you.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

SHENYANG CA6261B CENTRE LATHE

We have an Ex TAFE, Good used condition, CHINHUNG CH430 X 1100 Centre Lathe for sale
Specifications & general information are as follows
Manufactured in Taiwan
Features gap bed
Swing Over Bed 432mm
Swing Over Saddle 268mm
Swing in Gap 610mm
Distance Between centres 1100mm
Spindle Bore 58mm
Spindle mount Camlock D1-6
Spindle Speeds 12 speeds, 35 to 2000 rpm
Motor Hp/Kw 7.5hp/5kw
Power requirements 3 phase, 415 volt
Overall dimensions 2.25m x 1050mm x 1.7m high
Net weight 1.6 tons
This lathe features a metric lead screw & dials
Accessories/Features
3 Jaw chuck
4 Jaw chuck
Dog plate for turning between centre
Fagor 2-axis digital readout (checked & working)
Quick change tool post
Foot brake (checked & working)
Coolant system (can be heard running)
Interlocked chuck guard
We have run this machine. & all works well.
We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment.
Considering selling your machinery? We buy as well as sell machinery. Downsizing, relocating, closing down, or having surplus equipment. We are always on the lookout for quality machinery to buy. Please do not hesitate to contact us to discuss your machinery needs and how we can help you.
We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.
Our contact details are as follows,
Newmac Equipment Pty Ltd,
(Engineering Machine Tool & Accessory Sales)
10 Stephenson Rd,
Bayswater North,
Vic 3153,

Email sales@newmac.com.au
Web www.newmac.com.au

CHINHUNG CH430 X 1100 CENTRE LATHE

We have high quality German made OWT AD 2090, 40 postion quick change tool post holders for sale. Will suit Swiss Multix A size tool posts, German AXA-Haase MA  size tool posts  & other 40 position tool post brands. As new condition.

OWT AD 2090 QUICK CHANGE TOOL HOLDER

We have, in excellent condition, a Hardinge GS200 CNC lathe for sale

Stock # 4106

Specifications are as follows

Control Fanuc Series Oi
Spindle nose A2-6
Max Spindle speed 5000 rpm
Main motor 18.5kw
Max turning dia 284mm
Max turning length  406mm
Hole through spindle 62mm
Supply voltage needed 415 volt
Overall dimensions Machine  2.0m x 1.53m x 1.85m high.
Weight of Machine 2.8 tonne
Coolant Tank dimensions 1.7m x 0.55m x 0.5m High  Weight 100kgs
Transformer dimensions 0.55m x 0.45m x 0.53m High  Weight 150kgs
Chip Conveyor dimensions 2.3m x 0.4 m x 1.65m High  Weight 200kgs
Year of Manufacture 2011

Accessories included

3 Jaw Hydraulic Chuck
Collet chuck takes B60 Index Style  Collets
Tailstock
Chip Conveyor

Features

8 station tool turret
Coolant system
Worklight

We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment. We pride ourselves on providing exceptional customer service and believe that this personalized approach allows us to exceed your expectations.

We welcome any inquiries about the machine and invite you to contact us at

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

Considering selling your machinery?

We are always interested in purchasing metalworking machinery & surplus equipment, if you have one machine or a number of machines you need gone, please feel free contact us here at Newmac Equipment.

HARDINGE GS 200

We have a good used condition Yunnan CY PML 660 x 2000G centre lathe for sale

Specifications related to this lathe are as follows
Features Gap bed
Swing Over Bed 660mm
Swing Over Saddle 430mm
Swing in Gap Approx. 900mm
Distance Btw Ctrs 2m
Spindle Bore 105mm
Spindle mount Camlock D1-8
Spindle Speeds 6 to 1120 rpm
Power requirements 3 phase 415 volt
Overall dimensions 3.5m x 1.3m x 1.7m high
Approx. weight 3.5 tons
Features metric dials

Accessories/features
2 Axis digital readout (checked & working)
Quick change tool post
Thread chasing dial
Coolant system
4 jaw chuck
Foot brake

We have run this lathe & all works well.

We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment.

Considering selling your machinery? We buy as well as sell machinery. Downsizing, relocating, closing down, or having surplus equipment. We are always on the lookout for quality machinery to buy. Please do not hesitate to contact us to discuss your machinery needs and how we can help you.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

YUNNAN CY PML 660 X 2000G CENTRE LATHE

Find Lathes For Sale from Newmac Equipment.

New & Used Lathes For Sale in Australia

Newmac Equipment

Sale Price

KEIYO SEIKI KM 1800

YUNNAN CY S1760G CENTRE LATHE

MORI SIKI SL 25 CNC LATHE

NAKAMURA TOME TMC 20L CNC LATHE

KIRIU KIKAI LS-3 TURRET LATHE

HARRISON ALPHA ALPHA 330 PLUS

HERLESS CY L1640G ENTRE LATHE

SHENYANG CA6261B CENTRE LATHE

CHINHUNG CH430 X 1100 CENTRE LATHE

OWT AD 2090 QUICK CHANGE TOOL HOLDER

HARDINGE GS 200

YUNNAN CY PML 660 X 2000G CENTRE LATHE

Newmac Equipment

Dealer Address