Newmac Equipment

We have a new condition Pratt Burnerd 5 / 125mm 6 jaw Self Centring Chuck for sale.
Catalogue No. 1260-01205
The chuck comes with 2 sets of jaws & features fine adjustment for increased accuracy

PRATT BURNERD 5 / 125MM 6 JAW SELF CENTRING LATHE CHUCK

We have a Used 630mm Big Bore 3 Jaw Chuck for sale

OD 630mm

ID 255mm

All in good working order

UNKNOWN 630MM BIG BORE 3 JAW CHUCK

We have an excellent used condition Ecoca EL 5110 CNC teach lathe for sale.

Specification are as follows:

Swing over the bed 510mm
Swing over the cross slide 305mm
Distance between centres 1000mm
Spindle nose D1-8
Spindle bore 80mm
Spindle speeds 20 to 2000 rpm
15HP Main spindle motor
Year of manufacture 1985
Comes with the following accessories:

3 Jaw chuck
4 position tool post
Mitsubishi Meldas 520A  CNC control

This machine is in our warehouse ready for inspection under power.

ECOCA EL 5110

Dont miss out on this chance to acquire a meticulously reconditioned Colchester Chipmaster lathe, expertly brought back to top condition by an exceptionally skilled tradesman.

Every component of the lathe has undergone a thorough inspection after being fully disassembled. Any parts requiring attention have been either reconditioned or remanufactured, surpassing the original factory standards. The lathe boasts a fresh coat of paint both inside and out. To enhance manoeuvrability within a workshop, a base plate with approximately 120 wheels has been incorporated. Additionally, for user convenience, the lathe features a 2-axis digital readout and a quick-change tool post. Another nice feature fitted to the lathe is in addition to the forward & reverse switch, a spring-loaded forward & reverse toggle switch has been fitted for jogging the spindle, which can be used for turning up to a shoulder or screw cutting 

Seize this rare opportunity to own a top-tier, fully optimized Colchester Chipmaster lathe.

Specifications are as follows
Swing over the bed 286mm
Swing over the saddle 178mm
Distance between centres 508mm
Spindle bore 35mm
Spindle mount, camlock D1-3
Spindle speeds 35 to 3000 rpm
Features 2HP main motor
Power requirements 415 volt
Overall dimensions 1.6m x 0.8m x 1.7m high
Weight approx. 600kgs
Features imperial dial

Accessories with the lathe are as follows
3 jaw self-centring chuck
4 jaw independent chuck
Faceplate
Quick change tool post
Two axis digital read-out
Fixed steady
Travelling steady
Thread chasing dial
Coolant system

On a general note, we recommend customers visit us to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job before purchase.

This centre lathe is in our warehouse so please feel free to call us for more information & price or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or having machinery that is surplus to requirements, we would appreciate the opportunity to assist in any way we can.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

COLCHESTER CHIPMASTER 5 X 20

We have in our stock a good used 250mm 3 Jaw Pneumatic Chuck

Please feel free to pay us a visit or  phone us for more information.

We are always interested in purchasing metalworking machinery & surplus equipment, if you have one machine or a quantity of machines you need gone, please feel free contact us here at Newmac Equipment

UNKNOWN PNEUMATIC 250MM 3 JAW CHUCK

We have high quality German made OWT AD 2090, 40 postion quick change tool post holders for sale. Will suit Swiss Multix A size tool posts, German AXA-Haase MA  size tool posts  & other 40 position tool post brands. As new condition.

OWT AD 2090 QUICK CHANGE TOOL HOLDER

We have a Mori Seiki MR 2000G centre lathe for sale.

On special, price reduced to $8000+GST

Specifications are as follows

Swing over the bed 520mm
Swing over the saddle 290mm
Swing in the gap 750mm
Distance between centres 2m
Spindle bore 52mm
Spindle speeds 23 to 1125 rpm
Machine voltage 415
Overall dimensions 3.5m x 1m x 1.3m high
Weight 2.5 tons

Features

Imperial dials
Foot brake
Coolant system
Capable of cutting imperial & metric threads

Comes with the following accessories

250mm 3 jaw chuck
400mm 4 jaw chuck
Solid toolpost

For customers who wish to pay us a visit, we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job prior to purchase.

This centre lathe is in our warehouse so please feel free to call us for more information or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment, if you have one machine or a quantity of machines you need gone, please feel free contact us here at Newmac Equipment

MORI-SEIKI MR 2000G CENTRE LATHE

We have a good used Toolmaster TL 43-1730 Centre Lathe for sale.

Please dont hesitate to contact us if you have any questions about this machine or any of our other inventory.

Stock # 4000

Specifications are as follows

Swing over the bed 440mm
Swing over the saddle 240mm
Approx. swing in the gap 560mm
Distance between centres 1730mm
Spindle bore 60mm
Spindle mount, camlock D1-6
12 Spindle speeds 30 to 2000 rpm
Machine voltage required 415 volt
Overall dimensions 2,900mm x 1,100mm x 1,400mm high
Weight 2.5 tonnes

Features

Metric dials
Gap bed
Foot brake

Comes with the following accessories

3 & 4 Jaw chucks
Solid tool post
Chuck guard
Coolant system

We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job prior to purchase.

This centre lathe is in our warehouse so please feel free to call us for more information & price or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or have machinery that is surplus to requirements, we would appreciate the opportunity to assist in any way we can.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

TOOLMASTER TL 43 X 1730

We have Whacheon WL-435 Centre lathe for sale.

On special price reduced to $6500+GST

Whacheon also spelt Hwacheon are a quality South Korean lathe manufacture.

Specifications are as follows

Swing Over Bed 435mm
Swing Over Saddle 240mm
Distance between centres 850mm
Spindle bore 52mm
Spindle speeds 32 to 1800 rpm
Spindle mount Camlock D1-6
Machine voltage 415, 3 phase
Main motor 5HP
Year of manufacture 1986
Accessories with machine are as follows

250mm Bison 3 jaw chuck, with two sets of hard jaws
355mm 4 jaw chuck
40 position quick change tool post
Fixed steady
Thread chasing dial
Coolant system
Work light
2 axis digital read out
Features

Foot brake
Chuck guard
Non gap bed
For customers who wish to pay us a visit, we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job prior to purchase.

This centre lathe is in our warehouse so please feel free to call us for more information & price or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment, if you have one machine or a quantity of machines you need gone, please feel free contact us here at Newmac Equipment

WHACHEON WL-435 CENTRE LATHE

We have a German made VDF Wohlenberg Hannover W40 Centre Lathe for sale.

Specifications are as follows
Swing over the bed 870mm
Swing over the saddle approx. 550mm
Swing in the gap approx. 1.2m
Distance between centres 6m
Spindle bore 100mm
Spindle speeds 3.55 to 800 rpm
Motor 23kw/ 31HP
Power requirements 415 volt, 3 phase
Overall dimensions 8.8m x 2m x 1.6m high
Weight approx. 9 tons

Accessories
4 Jaw chuck
Soild tool post
2 fixed steadies
1 travelling steady
Thread fchasing dial

Features
Imperial lead screw & dials


Apart from reverse cross feed will not hold in all works well.

We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job prior to purchase.

This centre lathe is in our warehouse so please feel free to call us for more information & price or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or have machinery that is surplus to requirements, we would appreciate the opportunity to assist in any way we can

VDF WOHLENBERG HANNOVER W40 CENTRE LATHE

We have a Used Colchester Student Centre Lathe for sale

Specifications are as follows
Origin Made in England
Features a gap bed
Swing Over Bed 320mm
Swing Over Saddle 200mm
Swing in Gap Approx. 500mm
Distance Btw Ctrs 650mm
Spindle Bore 38mm
Spindle mount American Type L (long-taper) nose with large screwed ring
Spindle Speeds 45 to 1000 rpm
Machine Voltage 240 volt
Overall dimensions 1.55m x .85m x 1.45m high
Approx. weight Approx. 1 ton
Features imperial dials

Accessories
Self centring 3 jaw chuck
Independent 4 jaw chuck
Face plate
Dog plate for turning between centres
Quick change too post
Fixed Steady Yes
Travelling Steady Yes
Thread Chasing Dial Yes
Has been fitted with a servo motor & encoder to the lead screw/feed shaft
Other accessories as per photos

We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment, knowing youre making a smart choice for your business.

Considering selling your machinery? We buy as well as sell machinery. Downsizing, relocating, closing down, or having surplus equipment. We are always on the lookout for quality machinery to buy. Please do not hesitate to contact us to discuss your machinery needs and how we can help you. Your success is our priority.

We want to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance. Your peace of mind is essential to us, and were here to support you every step of the way.

COLCHESTER STUDENT

We have a CY-L1640G centre lathe for sale

Specifications are as follows

Swing over the bed 400mm
Swing over the saddle 140mm
Swing in the gap approx. 640mm
Distance between centres 1m
Spindle bore 54mm
Spindle speeds 33 to 2000 rpm
Spindle mount Camlock D1-6
Machine power requirement 415 volt
Overall dimensions 2.1m x 1m x 1.4m high
Weight 1.5 tons

Comes with the following accessories

3 Jaw chuck
4 Jaw chuck
Face plate
Thread chasing dial
Solid tool post
Coolant system
Work light
Foot brake

We have run this lathe & all works well, but for customers who wish to pay us a visit, we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job prior to purchase.

This centre lathe is in our warehouse so please feel free to call us for more information & price or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or have machinery that is surplus to requirements, we would appreciate the opportunity to assist in any way we can.

HERLESS CY L1640G ENTRE LATHE

Find Lathes For Sale in Victoria from Newmac Equipment.

New & Used Lathes For Sale in Victoria

Newmac Equipment

Sale Price

PRATT BURNERD 5 / 125MM 6 JAW SELF CENTRING LATHE CHUCK

UNKNOWN 630MM BIG BORE 3 JAW CHUCK

ECOCA EL 5110

COLCHESTER CHIPMASTER 5 X 20

UNKNOWN PNEUMATIC 250MM 3 JAW CHUCK

OWT AD 2090 QUICK CHANGE TOOL HOLDER

MORI-SEIKI MR 2000G CENTRE LATHE

TOOLMASTER TL 43 X 1730

WHACHEON WL-435 CENTRE LATHE

VDF WOHLENBERG HANNOVER W40 CENTRE LATHE

COLCHESTER STUDENT

HERLESS CY L1640G ENTRE LATHE

Newmac Equipment

Dealer Address