Newmac Equipment

We have a Yang Iron 420 x 1500 Centre Lathe for sale.

Stock # 4153

Specifications are as follows
Swing Over Bed 420mm approx.
Swing Over Saddle 240mm
Swing in Gap 600mm approx.
Distance Btw Ctrs 1500mm
Spindle Bore 50mm
Spindle Mount A Mount
Spindle Speeds 12 Speed 32  1800rpm
Motor Hp/Kw 5hp/3.7kw
Power requirements, 3 phase 415 volts
Overall Dimensions 2.6m x 0.9m x 1250mm high
Transport Weight 2.5 Tonne
Year of Manufacture 1973

Features
Imperial lead screw & dials
Gap bed

Accessories
3 & 4 jaw chucks
Quick change tool post
Fixed & travelling steadies
Thread chasing dial
Foot brake
Coolant system

We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job before purchase.

This milling machine is in our warehouse so please feel free to call for more information or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or having machinery surplus to requirements, we would appreciate the opportunity to assist in any way we can.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

YANG IRON 420 X 1500 CENTRE LATHE

We have two excellent used condition, Kito EQ0051S 500 kg electric chain hoist for sale.

Technical Specifications:
Lifting Capacity: 500 kg
Standard Lifting Height: 3 meters
Lifting Speeds:, High Speed: 7.6 meters per minute, Low Speed: 1.3 meters per minute, No-load High Speed: 9.9 meters per minute
Motor Output: 0.75 kW with a 40/20% duty rating
Power Supply: Three-phase, 415 volt
Enclosure Rating: IP55

Features
Dual Speed Operation with Inverter Control: Equipped with a frequency inverter, this hoist offers dual lifting speeds, allowing for precise load positioning and reduced load swing. The inverter ensures smooth starts and stops, enhancing operational safety.
No-load High-speed Function: When lifting less than 30% of the rated load, the hoist automatically increases its lifting speed by 1.3 times, improving work efficiency.
High-performance Mechanical Brake: The EQ0051S features an extremely durable pull-rotor brake system, designed for reliable performance over up to two million operations.
Nickel-plated Load Chain: Kitos original nickel-plated load chain offers enhanced corrosion resistance and reduced wear, ensuring longevity and reduced maintenance.
IP55-rated Protection: The hoists sealed die-cast aluminium body protects against dust and water jets, making it suitable for various industrial environments.

We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job before purchase.

These chain hoists are in our warehouse so please feel free to call us for more information or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or having machinery surplus to requirements, we would appreciate the opportunity to assist in any way we can.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

KITO EQ0051S 500 KG ELECTRIC CHAIN HOIST EQ0051S

We have an excellent used condition Steelmaster SM-SBHS2504 Hydraulic Guillotine for sale.

We need to clear some stock to make room, so weve reduced the price of this machine for a quick sale.

Was $10,000 + GST, now $8,000 + GST.

Snapshot specifications
Mild steel capacity 2.5m x 4mm
Power requirements 3 phase, 415 volt, 5.5kw
Overall dimensions (l x w x h) 3130 mm x 1610 mm x 1600 mm
Weight 4.5 tons

Accessories/features
Hydraulic hold down
Power back gauge
Rear safety lights,
Variable stroke control
Stroke counter

We have had this guillotine running & all works well

This guillotine is in our warehouse so please feel free to give us a ring or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery, if you have machines surplus to requirements or you are closing down, please feel free to contact us here at Newmac Equipment.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

STEELMASTER SM-SBHS2504 HYDRAULIC GUILLOTINE

We have a Richmond SR2 Radial Arm Drilling Machine for sale.

Specifications related to this radial arm drill are as follows:

Table size 910mm x 610mm 
32mm Max drilling capacity in mild steel
Max distance from the centre of the spindle to the column 180mm to 1,120mm
9 Spindle Speeds 100 to 1500 rpm
3 automatic feed rates
Spindle taper, MT3
Quill travel 180mm
Motor Hp 2hp
Power requirements 3 phase 415 volt
Overall dimensions 1,800 x 720 x 2,250mm High
Weight 1.5 tons

Testing of Machinery  Try Before You Buy

We are happy to test-run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job prior to purchase.

This machine is in our warehouse so feel free to pop in to inspect the machine at your convenience or give us a ring for more information.

Thinking of selling your used or surplus equipment? Looking at Downsizing, Relocating, Closing Down or have machinery that is surplus to requirements. We are always looking for machinery to buy, so would appreciate the opportunity to assist in any way we can.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

RICHMOND SR2

We have a Harrison Alpha 330 Plus  CNC Teach lathe for sale

Stock # 4079

Specifications are as follows

Fanuc 21 TBControl
Spindle Nose D1-4 Camlock
Spindle speed range 0 to 3500 rpm
Main motor HP/KW 7.5/10
Max Turning Dia 330mm
Max Turning length 1000mm
Hole through spindle 42mm
Supply voltage needed 415 volt
Overall dimensions Machine  2040mm x 1200mm x 1550mm High
Weight Machine approx 1200kgs
Year of Manufacture 1999

Accessories included

Quick Change Toolpost and tool holders
3 Jaw and 4 Jaw Chuck
Travelling Steady Rest

Features
Teach in Software
Coolant system
Worklight

We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment. We pride ourselves on providing exceptional customer service and believe that this personalized approach allows us to exceed your expectations.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

Considering selling your machinery?

We are always interested in purchasing metalworking machinery & surplus equipment, if you have one machine or a number of machines you need gone, please feel free contact us here at Newmac Equipment.

HARRISON ALPHA ALPHA 330 PLUS

We have an ex-college, in excellent used condition, Meber 400 Professional Vertical Bandsaw for sale.

Meber produces robust and versatile machines designed for precision woodworking tasks. Manufactured in Italy, Meber has garnered a reputation for durability and performance in professional workshops and educational settings.

Key Specifications
Cutting Capacity (W × H): 390 × 225 mm
Blade Length: 3185 mm
Maximum Blade Width: 25 mm
Blade Speed: 1140 meters per minute
Flywheel Speed: 781 RPM
Table Size: 500 × 400 mm
Motor Power: 1.5 HP
Power requirements: 3 Phase 415 Volts
Weight: Approx. 120 kg
Overall dimensions 760mm x 530mm x 1730mm high

Features/Comes with
Tilting table
Guild fence

We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job before purchase.

This woodworking vertical bandsaw is in our warehouse so please feel free to call us for more information & price or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or having machinery surplus to requirements, we would appreciate the opportunity to assist in any way we can.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

MEBER 400 PROFESSIONAL VERTICAL BANDSAW

We have a good used Hydraulic Panbrake Folder for sale.

This machine is of heavy-duty construction and is fitted with hydraulic clamping and folding. It is supplied with a segmented (finger) top beam, allowing for box and pan folding work. The folder fitted with a control panel for hydraulic operation.

There is no brand identification or year of manufacture on the machine.

Specifications

Type: Hydraulic panbrake folder
Working length: Approx. 2440 mm
Mild steel capacity: Approx. 2.0 mm
Segmented fingers fitted
Hydraulic operation

Condition

The machine is in used condition and shows general cosmetic wear consistent with age and use. It has been powered up and is available for inspection at our premises.

We recommend inspection to confirm suitability for your application.

We would like to extend a note to all prospective customers. We are happy to provide freight quotes for machines to be shipped anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

Considering selling your machinery?

We buy as well as sell machinery. Downsizing, relocating, closing down, or having surplus equipment, we would be pleased to assist you. We are always on the lookout for quality machinery to buy and can offer you a fair price for your equipment. Please do not hesitate to contact us to discuss your machinery needs and how we can help you. We look forward to hearing from you.

UNKNOWN 2.4M X 2MM

We have an Italian-made, excellent used condition,  Centauro Compact 600 CO vertical woodworking bandsaw for sale.

This Italian-made woodworking machine is designed for accurate timber cutting and offers solid cast construction, making it a reliable addition to any cabinet shop, joinery, or school workshop.

Specifications
Throat Size: 580 mm

Maximum Cutting Height: 320 mm (table to blade guide fully raised)

Table Size: 860 mm × 600 mm

Blade Speed: Single speed, suitable for timber cutting

Power Requirements: 3-phase, 415 V

Overall Dimensions: 1.2 m (L) × 0.75 m (W) × 2.1 m (H)

Approximate Weight: 300 kg

We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job before purchase.

This milling machine is in our warehouse so please feel free to call us for more information & price or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or having machinery surplus to requirements, we would appreciate the opportunity to assist in any way we can.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

CENTAURO COMPACT 600 CO VERTICAL WOODWORK BANDSAW

We have an Induma Universal milling machine for sale.

Stock # 4152

Specifications are as follows

Table size 1,070mm x 200mm
XYZ travel 600 / 250 / 500 mm approx
12 Spindle speeds 40 to 1600rpm
NT40 Spindle Taper
Spindle Motor  3.5HP
Power requirements 415 volt, 3 phase
Overall dimensions 1.4m x 1.7m x 1.7m High
Weight 1.5 Tonne
Features/Accessories

X and Y Power Feed
Arbor Support
Coolant system
Slotting attachment

We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment.

Are you considering selling your machinery?

We buy as well as sell machinery. Downsizing, relocating, closing down, or having surplus equipment. We are always on the lookout for quality machinery to buy. Please do not hesitate to contact us to discuss your machinery needs and how we can help you.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

INDUMA UNIVERSAL MILL

We have a Ryobi R502 Router on a Draco Router Bench for sale.

1/2 Collet Capacity
1/2 Router Bit
Draco Router Bench
240V Single Phase
Dimensions for Transport 700 x 500 x 1,130mm High
Weight 40kg

We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job before purchase.

This machine is in our warehouse so please feel free to pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or having machinery surplus to requirements, we would appreciate the opportunity to assist in any way we can.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

RYOBI R502

We have a Bridgeport Turret Milling Machine for sale

Stock # 4229

This Bridgeport turret mill was manufactured by Adcock & Shipley & is in good used condition.

Specifications are as follows

Table size 42 (1067mm) x 9 (228mm)
Spindle Speeds 67 to 2300 rpm
Spindle taper turret R8
Spindle Motor 2.0hp
Power requirements 3 phase 415 volt
Dimensions for Transport 1.6m x 1.5m x 2m high
Weight 1.25 tons

Feature/comes with

Slotting Attachment
X axis power feed  fully operational;

We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment.

Are you considering selling your machinery?

We buy as well as sell machinery. Downsizing, relocating, closing down, or having surplus equipment. We are always on the lookout for quality machinery to buy. Please do not hesitate to contact us to discuss your machinery needs and how we can help you.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

BRIDGEPORT R8 SPINDLE

Waldown 7'' Tip Tool Grinder for sale
Australian Made
3 Phase 415 Volt
Restored with new bearings
Completely re-painted.
Wheel size 177mm x 38mm
Adjustable Tool rests

We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job before purchase.

This lathe is in our warehouse so please feel free to  pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or having machinery surplus to requirements, we would appreciate the opportunity to assist in any way we can.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

WALDOWN T7

Find Plant and Equipment For Sale. Browse 196 listings from Newmac Equipment.

New & Used Plant and Equipment For Sale

Newmac Equipment

Sale Price

YANG IRON 420 X 1500 CENTRE LATHE

KITO EQ0051S 500 KG ELECTRIC CHAIN HOIST EQ0051S

STEELMASTER SM-SBHS2504 HYDRAULIC GUILLOTINE

RICHMOND SR2

HARRISON ALPHA ALPHA 330 PLUS

MEBER 400 PROFESSIONAL VERTICAL BANDSAW

UNKNOWN 2.4M X 2MM

CENTAURO COMPACT 600 CO VERTICAL WOODWORK BANDSAW

INDUMA UNIVERSAL MILL

RYOBI R502

BRIDGEPORT R8 SPINDLE

WALDOWN T7

Newmac Equipment

Dealer Address