Newmac Equipment

We have an excellent used condition, Kingsland 55XS Punch & Shear Ironworker for sale.

Stock# 4668

Hydraulic Two Man Operation 55 Tonne Capacity
Punch Diameter Capacity in mild steel 32 x 13mm/38 x 10mm
Angle Iron Capacity in mild steel at 90° 130 x 13mm
Angle Iron Capacity in mild steel at 45° 70 x 10mm
Round Bar Capacity in mild steel 45mm
Square Bar Capacity in mild steel 45mm
Shearing Capacity in mild steel plate 230mm x 20mm thick or 375mm x 10mm thick
Notching Capacity in mild steel 45mm x 90mm deep x 10mm thick
See photos of charts on machine

We have run this machine. All functions are working. This Ironworker is in our warehouse so please feel free to pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery, if you have machines surplus to requirements or you are closing down, please feel free to contact us here at Newmac Equipment.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

KINGSLAND 55XS

We have an ex-TAFE Takang TK 330 Centre Lathe for sale in good used condition. Stock # 4101

Takang is a well-regarded Taiwanese manufacturer and are known for their solid construction, reliability, and long service life in both training and industrial environments.

This is not a Chinese lathe. It is a heavy, high-quality, industrial-grade Taiwanese machine designed for continuous use.

Stock # 4101

Specifications are as follows

Swing Over Bed 330mm
Swing Over Saddle 1600mm
Distance Btw Ctrs 800mm
Spindle Bore 42mm
Spindle mount D1-5 Camlock
Spindle Speeds 8 Speed 75 to 2000 rpm
Power requirements 3 phase, 415 volt
Spindle Motor 3hp
Overall dimensions 2.2m x 1.0m x 1.4m high
Approx. weight 2 tonnes
Accessories

3 & 4 Jaw chuck/Face Plate/Drive Dog Plate
Fixed Steady Rest (Without Clamp Plate)
Coolant System, can be heard running

We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job before purchase.

This Lathe is in our warehouse so please feel free to pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or having machinery surplus to requirements, we would appreciate the opportunity to assist in any way we can.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

TAKANG TK 330

Shanghai Lifu QC12Y-6×2500 Hydraulic Guillotine for sale

Solid mid-size shear with real capacity  2500mm wide, 6mm mild steel. Hydraulic swing beam, adjustable blade clearance, adjustable back gauge, foot pedal control. In running order, ready to go straight to work

Features:

Hydraulic swing beam shearing action
2500mm x 6mm mild steel cutting capacity
Adjustable blade clearance (rack and dial setting, calibrated 0.05mm to 0.85mm)
Adjustable back gauge via control buttons
Foot pedal operation
Front support arms for handling larger sheet sizes
Please note: the manual back gauge crank with fine adjustment is missing.

A solid mid-size shear suited to fabrication shops, sheet metal workshops, and steel processors needing reliable capacity in the 6mm mild steel range. Can be demonstrated running in our Bayswater North warehouse.

Inspections welcome  no appointment necessary, come in during business hours.

Freight options
We are happy to provide freight quotes with a full delivery address.

3 Phase Power  Please Note
This machine does not include a plug. When 3 phase machinery is decommissioned from industrial use, it is typically disconnected  from a switchboard by an electrician  meaning no plug is fitted, and in some cases the cable may also be absent.

As a machinery dealer, we are not electricians and are unable to supply or fit plugs. Buyers will need to arrange connection through a licensed electrician. This is no different to purchasing new 3-phase machinery, which also requires a licensed electrician for installation.

On occasion, a machine will arrive with a plug already fitted  in that case, it stays. For the same reason we dont fit plugs, we dont remove them either.

We recommend customers visit us to inspect the machinery. Were happy to test run it in our warehouse, so you can be confident it will suit your job before purchase.

This hydraulic guillotine is in our warehouse so please feel free to call us on  for more information or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery and surplus equipment. Should you be looking at downsizing, relocating, closing down or having machinery surplus to requirements, we would appreciate the opportunity to assist in any way we can.

A note to all prospective customers: we are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

SHANGHAI LIFU QC12Y-6×2500

We have a used condition Hydracut 3mm x 2500mm Fixed Rake Hydraulic Guillotine for sale.
Stock # 4200
Specifications
Mild steel capacity 2.5m x 3mm
Power requirements 3 phase, 415 volt
Overall dimensions (l x w x h) 3000 mm x 1450 mm x 1700 mm
Weight 4.0 tons approx
Accessories/features
Hydraulic hold down
Manual back gauge
We have had this guillotine running & all works well
This guillotine is in our warehouse so please feel free to pop in to inspect the machine at your convenience.
We are always interested in purchasing metalworking machinery, if you have machines surplus to requirements or you are closing down, please feel free to contact us here at Newmac Equipment.
We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

HYDRACUT 3MM X 2500MM

PMC PM-3S

We have a Bulgarian made 3MM Centre Lathe for sale

Stock # 4091

Heavy-duty Bulgarian-built centre lathe  proven ZMM engineering

This 3MM (ZMM) centre lathe comes from one of Europe's most established lathe manufacturers, with production in Bulgaria dating back to 1971 and well over 100,000 machines built and exported worldwide. Known for solid cast-iron construction and a wide, stable bed, it's fitted here with a tested Jenix 2-axis digital readout, quick change tool post, and both fixed and travelling steadies  a solid, well-equipped machine ready to get to work.

Specifications are as follows

Swing Over Bed 430mm
Swing Over Saddle 200mm
Distance Btw Ctrs 900mm
Spindle Bore 42mm
Spindle mount Threaded
Spindle Speeds 45 to 2000 rpm
Power requirements 3 phase, 415 volt
Overall dimensions 2.2m x 1.0m x 1.4m high
Approx. weight 2 tonnes
Accessories

3 & 4 Jaw chuck
Jenix 2 axis digital read out (tested & working)
Quick change tool post
Fixed Steady
Travelling Steady
Coolant System, can be heard running

We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job before purchase.

This Lathe is in our warehouse so please feel free to op in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or having machinery surplus to requirements, we would appreciate the opportunity to assist in any way we can.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

3MM 430 X 850

We have an excellent used condition Herless 3S Turret Milling Machine for sale. This ex-school Bridgeport-style turret mill is well suited to toolrooms, training environments, and general engineering workshops.

Specifications are as follows
Table size 1370mm x 250mm
Spindle Speeds 75 to 4630 rpm
Spindle taper NT30
Motor Hp/Kw 3HP/2.2KW
Power requirements 3 phase 415 volt
Dimensions for Transport 1800mm x 1350mm x 2100mm highWeight Approx. 1.25 Tonnes

Accessories/Features
X axis Align power Feed
Metric dials

Inspection & Testing
We recommend customers visit our warehouse to inspect the machine in person. A test run can be arranged so you can assess operation prior to purchase and make an informed decision.

Selling Machinery?
We buy as well as sell machinery. If you are downsizing, relocating, closing down, or have surplus equipment, please contact us to discuss your machinery.

Freight & Insurance
We are happy to provide details of freight companies that transport machinery Australia-wide or internationally. Please note that machines are not insured during transport by either the transport companies or Newmac Equipment. Customers are strongly advised to arrange their own transport insurance through their insurer.

HERLESS 3S TURRET MILLING MACHINE BRIDGEPORT-STYLE

A solid, well-proven hydraulic press brake ready to go straight into production. This machine has been run and tested in our workshop and operates well  foot pedal controlled with a motorised ballscrew backgauge (button control) for fast positioning.

Key specifications:
Nominal pressure: 63 tonnes
Length of work table: 2.5m
Distance between columns: 1850mm
Throat depth: 250mm
Ram stroke: 120mm
Maximum open height: 350mm
Backgauge travel: Approx 450mm (motorised ballscrew, button control)
Machine voltage: 415V
Overall dimensions: 2.55m x 1.6m x 2.2m high
Weight: approx. 4,200kg

Includes 
back gauge, top & bottom tooling as per photos

Built by the Shanghai Lifu Forging Press Machine Tool Factory, a well-established Chinese manufacturer of hydraulic press brakes and guillotines. This model suits general sheet metal fabrication work, with a table length and tonnage that covers most workshop bending jobs.

Currently set up and running in our Bayswater North warehouse  welcome to come in and see it working during business hours.

Freight options

We are happy to provide freight quotes with a full delivery address

3 Phase Power  Please Note
This machine does not include a plug. When 3 phase machinery is decommissioned from industrial use, it is typically disconnected  from a switchboard by an electrician  meaning no plug is fitted, and in some cases the cable may also be absent.

As a machinery dealer, we are not electricians and are unable to supply or fit plugs. Buyers will need to arrange connection through a licensed electrician. This is no different to purchasing new 3-phase machinery, which also requires a licensed electrician for installation.

On occasion, a machine will arrive with a plug already fitted  in that case, it stays. For the same reason we dont fit plugs, we dont remove them either.

We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job before purchase.

This hydraulic press brake folder is in our warehouse so please feel free to call us for more information & price or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or having machinery surplus to requirements, we would appreciate the opportunity to assist in any way we can.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

LF SHANGHAI LIFU WC67Y-63T HYDRAULIC PRESS BRAKE

Colchester Triumph 2000 Gap Bed Center Lathe Available for immediate inspection is a highly versatile and robust Colchester Triumph 2000 Gap Bed Center Lathe. 
Renowned in the industry for its rigid construction, precision, and reliability, 
this machine is ideal for tool rooms, maintenance workshops, or general jobbing shops.This unit comes well-equipped with highly sought-after accessories, 
including a Taper Turning Attachment and Dual Metric/Imperial Dials.

Key Specifications
Capacity: 390 mm swing over bed | 240 mm swing over saddle
Gap Bed: Yes (580 mm swing in gap)
Distance Between Centers: 760 mm
Spindle Bore: 55 mm
Spindle Mount: 6" D1 Cam lock Spindle
 Speeds: 25  2000 RPM (16 speeds)
Power: 7.5 HP / 5.5 kW Motor 
(415V / 3-Phase)
Dials: Dual Metric & Imperial dials for versatile operation Included 
Accessories & Features
???? Chucks & Face plate Included?? 
4-Way Tool post 
Taper Turning Attachment (Highly valuable factory option)???? T
Thread Chasing Dial
 Integrated Coolant System
Machine Dimensions   :  1900 mm (L) x 900 mm (W) x 1300 mm (H)
Approximate Weight: 1,280 kg

Overall Condition: 
Clean, running condition / Well-maintained /
 Running well under power" 

Forklift loading is available on-site. 
Freight can be arranged nationwide at the buyer's expense.

COLCHESTER TRIUMPH 2000

We have an excellent used condition CNC Router/Milling Machine for sale

Stock # 4204

Technical Data Snapshot

Table size 750mm x 550mm
X/Y/Z travel 460mm x 540mm x 170mm
Control Type PC Based Flashcut CNC Software
Max spindle speed 30,000rpm
ER 25 Collet System
Spindle Motor 1.4kw
Machine power requirements 240 volt
Machine Dimensions for Transport, including cabinet 1,070  x 900 x 1,700mm high
Weight Approx. 400kgs

Includes the following accessories

Machine base and enclosure
Flashcut CNC Software
Windows based PC and Screen

We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment.

Considering selling your machinery? We buy as well as sell machinery. Downsizing, relocating, closing down, or having surplus equipment. We are always on the lookout for quality machinery to buy. Please do not hesitate to contact us to discuss your machinery needs and how we can help you.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise customers to take out transport insurance with their usual insurance company.

CNC ROUTER CNC ROUTER

Pfauter SF1 Worm & Thread Milling Machine for sale

Maker: Maschinenfabrik Pfauter, Chemnitz (Germany)
Model: SF1
Type: Manual worm and thread milling machine

Overview

The Pfauter SF1 is a precision German-made worm and thread milling machine designed for producing single- or multi-start worms, lead screws and other high-accuracy threads. Its rigid construction, short gear trains and versatile head options make it suitable for both repair workshops and gear manufacturers.

Key Features (please note the following was copied from information from .lathes./pfauter-sf1/, our machine may differ)

Cuts workpieces up to 295 mm in diameter (standard headstock) or 320 mm (optional headstock).
Handles pitch modules up to 15 mm (side-milling head) or 30 mm (end-milling head).
Maximum centre distance 730 mm (standard headstock), 680720 mm with larger headstock.
Lead angles up to 90° with lead ranges from 24590 mm to 15,000 mm.
Swivelling milling spindle: +90° to right / 125° to left.
Spindle bore: 80 mm (standard) or 155 mm (special headstock).
Maximum cutter sizes: Ø210 × 100 mm (standard) or Ø255 × 160 mm (parallel head).

Technical Specifications

Centre height: 150 mm (standard), 163 mm (special headstock).
Power: 11 kW total consumption.
Main drive motor: 7.4 HP / 5.5 kW
Rapid traverse motor: 4 HP / 3 kW
Electrical: 3 phase 415 volt
Weight: Approx. 4,400 kg (with accessories)
Floor space: 3,600 × 2,170 × 1,630 mm (with doors open)

Applications

Milling precision worms, lead screws and multi-start threads.
Adjustable indexing gear minimises backlash, ensuring high accuracy.
Suitable for repair shops and gear manufacturing operations.
We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job before purchase.

This machine is in our warehouse so please feel free to call us on  for more information & price or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or having machinery surplus to requirements, we would appreciate the opportunity to assist in any way we can.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

PFAUTER SF1 WORM & THREAD MILLING MACHINE

Seiwa SHG-16 Hob Blade Groove Grinding Machine for sale

The Seiwa SHG-16 is a specialised machine designed for precision grinding of hob flutes, ensuring gear cutting tools remain sharp and accurate for continued use in production. Built in Japan, this model reflects the robust engineering quality that Seiwa is known for in the gear-manufacturing industry.

Key Specifications:

Maximum hob diameter: 200 mm (8?)
Maximum hob length: 250 mm (10?)
Maximum module: m16 (DP 1½)
Grinding wheel diameter: 200 mm (8?)
Wheel spindle speed (2 steps): 2,100 & 2,600 rpm
Maximum longitudinal travel of work table: 380 mm (15?)
Maximum vertical travel of work table: 120 mm (4¾)
Distance between centres: 550 mm (21?)
Range of lead template angle (either side): 10°4233
Minimum hob lead: 1,408 mm (55½)
Working surface of work table: 1,060 × 140 mm (41½ × 5½)
Motors:
Main: 0.75 kW (1 HP)
Dust collector: 0.2 kW (¼ HP)
Floor space (L × W × H): 1,700 × 1,060 × 1,620 mm (66? × 41½ × 63?)
Net weight: 750 kg (2,640 lbs)
Click here for additional information & price (will open a pdf in a new tab)

Features & Benefits:

Purpose-built for regrinding hob grooves with accuracy.
Extends the service life of expensive hobs, reducing tooling costs.
Maintains the precision needed for high-quality gear production.
Compact, heavy-duty construction for long-term reliability.
Comes with manual
We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment, knowing youre making a smart choice for your business.

Are you considering selling your machinery? We buy as well as sell machinery. Downsizing? relocating? closing down? or having surplus equipment. We are always on the lookout for quality machinery to buy. Please do not hesitate to contact us to discuss your machinery needs and how we can help you. Your success is our priority.

We want to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise customers to take out transport insurance with their usual insurance company. Your peace of mind is essential to us, and were here to support you every step of the way.

SEIWA SHG-16 HOB BLADE GROOVE GRINDING MACHINE

Find Engineering - Fabrication For Sale from $5,000 to $10,000 from Newmac Equipment.

Engineering - Fabrication For Sale from $5,000 to $10,000

Newmac Equipment

Sale Price

KINGSLAND 55XS

TAKANG TK 330

SHANGHAI LIFU QC12Y-6×2500

HYDRACUT 3MM X 2500MM

PMC PM-3S

3MM 430 X 850

HERLESS 3S TURRET MILLING MACHINE BRIDGEPORT-STYLE

LF SHANGHAI LIFU WC67Y-63T HYDRAULIC PRESS BRAKE

COLCHESTER TRIUMPH 2000

CNC ROUTER CNC ROUTER

PFAUTER SF1 WORM & THREAD MILLING MACHINE

SEIWA SHG-16 HOB BLADE GROOVE GRINDING MACHINE

Newmac Equipment

Dealer Address