Newmac Equipment

Final Opportunity  Make an Offer Before Its Scrapped

This DeVlieg 3H-48 Spiramatic CNC jigmill has been in our stock for many years, and due to its age and limited market demand, we are planning to scrap it in the near future. (it's still a working machine)

Before we proceed, were giving customers a final chance to make an offer  any reasonable offer will be considered. This could be an opportunity to salvage parts, repurpose the machine, or put it back into use at a bargain price.

If youre interested, contact us now or visit us to inspect the machine before its gone for good!

Specifications are as follows for this cnc machine:

Retro fitted with Fagor 8025/30 CNC control in 1991
spindle dia 3"
spindle taper ISO 40
table size 48" x 35"
spindle travel (Z axis) 16"
horizontal travel (X axis) 48"
vertical travel of head (Y axis) 36"
Table retraction (w axis) 16"
spindle speeds 25 to 1200 RPM
Dimensions for Transport 3.7m x 3.3m x 3.5m (L x W x H)
Approx Weight 12 Tonne

1991 DEVLIEG 3H-48 Spiramatic CNC jigmill

We have a Repco Power S6A surface grinder for sale

Specifications are as follows

Magnetic chuck size 600mm x 300mm, which has good hold down power
Max grinding wheel Ø, not know but has clearance in the guard for Ø450mm, current grinding wheel appox. Ø350mm
Max workpiece hight under the wheel, depends on grinding wheel Ø, current wheel would accommodate 290mm
Travels accomodate passing over full length & width of the magnetic chuck
Can be used in manual mode & automatic mode with cross feed
Power requirements 3 phase 415 volt
Overall dimensions for transport 2.5m x 1.8m x 2.5m high
Weight approx. 3 tons

Comes with

Coolant system
Manual magnetic chuck

Features

Power rise & fall on the grinding wheel head

For customers who wish to pay us a visit, we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job prior to purchase.

Please feel free to call us for more information & price or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or have machinery that is surplus to requirements, we would appreciate the opportunity to assist in any way we can.

REPCO POWER S6A AUTOMATIC SURFACE GRINDING MACHINE

We have a Tetlow K11A Electric kiln for sale.

Stock # 4057

Specifications are as follows

Internal dimensions mm wide x mm high x mm deep
Power requirements 415 volt, 34 Amps
Temperature range 0-1300°C
Features Digital Programmer for temperature control
Internal Dimensions 610 x 610 x 762mm
Dimensions 1000mm x 1200mm x 1800mm
Weight Approx 750kgs
Comes complete with Heat Resistant Clothing
Build date 18/10/2010

We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment, knowing youre making a smart choice for your business.

Are you considering selling your machinery? We buy as well as sell machinery. Downsizing? relocating? closing down? or having surplus equipment. We are always on the lookout for quality machinery to buy. Please do not hesitate to contact us to discuss your machinery needs and how we can help you. Your success is our priority.

We want to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance. Your peace of mind is essential to us, and were here to support you every step of the way.

TETLOW K11A

We have in good condition a Spanish built Holke F10-V turret milling machine for sale.

Specifications are as follows

Table size 1120mm x 250mm
X/Y/Z travels 800/400/300mm approx
Power feed on X Axis
8 Spindle speeds 67 to 2300 rpm
Spindle taper NT30
Main motor 1.5kw
Machine voltage 415 volt
Dimensions for Transport 1.8m x 1.7m x 2.1m
Weight 1.5 Tonne
Click here for printable PDF & price

Comes with/Features

X axis power feed
Coolant system

Click here for a printable report & price

We have run this milling machine & all works well.

We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job prior to purchase.

This milling machine is in our warehouse so please feel free to call us for more information & price or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or have machinery that is surplus to requirements, we would appreciate the opportunity to assist in any way we can.

HOLKE F10-V

We have an excellent used condition, Mazak Quick Turn 8G CNC Lathe for sale.

Specifications related to this cnc lathe are as follows
Spindle nose A2-5
Max spindle speed 4500
Main motor 10hp
Distance between spindle nose & tool holder 145mm to 448mm
Standard cutting dia. 100mm
Max cutting dia. 160mm
Max bar material cutting dia. 32mm
Max length of work 160mm
Max chuck work capacity 25kgs
Hole dia.through spindle 50mm
Weight 2.85 tons
Overall dimensions, Main machine 1850mm x 1700mm x 1900mm high
Chip conveyor 2200mm x 500mm x 1150mm high

Features & comes with the following accessories
Built-in tool setter
Chip conveyor
Coolant system
Work light
Gang type tooling

We have had this CNC lathe running & all works well.

We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment. We pride ourselves on providing exceptional customer service and believe that this personalized approach allows us to exceed your expectations.

We welcome any inquiries about the machine and invite you to contact us at

We would like to extend a note to all prospective customers regarding the transport of machinery. We are happy to provide freight quotes for machines to be shipped anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance. Our team is committed to providing exceptional customer service, and we want to ensure that our customers are fully informed about the potential risks involved with transporting machinery. Please do not hesitate to contact us if you have any questions or concerns about shipping machinery. Thank you for considering our products, and we look forward to the opportunity to serve you.

Considering selling your machinery?

Downsizing, relocating, closing down, or having surplus equipment, we would be pleased to assist you. We are always on the lookout for quality machinery to buy and can offer you a fair price for your equipment. Our team of experts will work with you to ensure a smooth and hassle-free process, taking care of everything from inspection to transportation. We are committed to providing our customers with exceptional service and value transparency and honesty in all of our dealings. Please do not hesitate to contact us to discuss your machinery needs and how we can help you. We look forward to hearing from you.

MAZAK QUICK TURN 8G CNC LATHE

We have a Jackmill J40 Universal Tool & Cutter Grinder in excellent used condition available for sale.

Stock # 4142

This Taiwanese-made, tool & cutter grinder includes an extensive range of accessories, as shown in the photos, which is rare to find in such a complete set. This makes it a truly outstanding offering, providing versatility and value for a wide range of tooling applications.

Please note that the photos below form an integral part of the description, showing the current condition of the machine and the full range of accessories included. To expedite getting the machine listed, we have taken the photos prior to a thorough cleaning, which will be completed before delivery.

The only minor issue is that the protective rubber bellows may need replacing. This replacement, if desired, would be at the purchasers expense.

Click here for additional information & price (will open a pdf in a new tab)

We have run this machine. & all works well.

We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment.

Considering selling your machinery? We buy as well as sell machinery. Downsizing, relocating, closing down, or having surplus equipment. We are always on the lookout for quality machinery to buy. Please do not hesitate to contact us to discuss your machinery needs and how we can help you.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

JACK MILL J40 TOOL & CUTTER GRINDER

We have a Iemca TS 560 61 P Magazine Barfeeder for sale.
Now on sale, price reduced from $5000+GST to $2500+GST

General Specifications

Max Bar Capacity 70mm
Magazine load 10-70mm Bar
Chain Feed with drive motor
6m Bar Length
Overall dimensions 8,300mmm x 700mm x 1,800mm high
Weight appox 1,500kgs
This Iemca Magazine Barfeeder is in our warehouse so please feel free to call us on  for more information & price or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment, if you have one machine or a quantity of machines you want to sell, please feel free to give us a ring.

IEMCA TS 560/61/P

We have a Bulgarian made 3MM Centre Lathe for sale

Stock # 4091

Specifications are as follows

Swing Over Bed 430mm
Swing Over Saddle 200mm
Distance Btw Ctrs 900mm
Spindle Bore 42mm
Spindle mount Threaded
Spindle Speeds 45 to 2000 rpm
Power requirements 3 phase, 415 volt
Overall dimensions 2.2m x 1.0m x 1.4m high
Approx. weight 2 tonnes
Accessories

3 & 4 Jaw chuck
Jenix 2 axis digital read out (tested & working)
Quick change tool post
Fixed Steady
Travelling Steady
Coolant System, can be heard running

We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job before purchase.

This Lathe is in our warehouse so please feel free to op in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or having machinery surplus to requirements, we would appreciate the opportunity to assist in any way we can.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

3MM 430 X 850

We have a used Peddinghaus 150 ton hydraulic press for sale. 

Specifications are as follows
Working table area 380mm x 380mm
Tonnage approx. 150 tonne
Max height under the ram 250mm (could be increased by removing a part on the bottom of the ram)
Power requirements 415 volt
Dimensions 1.1m x 0.9m x 3m (could be reduced for transport to 2.45m by removing the hydraulics from the top of the press)
Weight approx. 1.5 tonnes

We have had this hydraulic press running & all works well.

We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment.

We would like to extend a note to all prospective customers. We are happy to provide freight quotes for machines to be shipped anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance. 

Considering selling your machinery?

We buy as well as sell machinery. Downsizing, relocating, closing down, or having surplus equipment, we would be pleased to assist you. We are always on the lookout for quality machinery to buy and can offer you a fair price for your equipment. Please do not hesitate to contact us to discuss your machinery needs and how we can help you. We look forward to hearing from you.

PEDDINGHAUS 150 TON HYDRAULIC PRESS

We have a JF23 60A, 60 ton, C frame power press for sale.

Specifications are as follows

Nominal Pressure 600KN
Slide Stroke 101.6mm
No. of Strokes per minute 100
Max. Shut Height 362mm
Die Height Adjustment 76mm
Throat Depth 279mm
Weight 5 tons

This press is new old stock & has never been used.

Features pneumatic friction clutch

This JF23 60A C frame Power Press is in our warehouse, please feel free to call us for more information or pop in to inspect the machine at your convenience.

Are you thinking of selling your used or surplus equipment? Looking at Downsizing, Relocating, Closing Down or have machinery that is surplus to requirements. We are always looking for machinery to buy,  so would appreciate the opportunity to assist in any way we can.

We are always interested in purchasing metalworking machinery, if you have machines surplus to requirements or you are closing down, please feel free to contact us here at Newmac Equipment

SERVIAN JF23 60A C FRAME POWER PRESS

We have a Takang TK 330 Lathe for sale

Stock # 4101

Specifications are as follows

Swing Over Bed 330mm
Swing Over Saddle 1600mm
Distance Btw Ctrs 800mm
Spindle Bore 42mm
Spindle mount D1-5 Camlock
Spindle Speeds 8 Speed 75 to 2000 rpm
Power requirements 3 phase, 415 volt
Spindle Motor 3hp
Overall dimensions 2.2m x 1.0m x 1.4m high
Approx. weight 2 tonnes
Accessories

3 & 4 Jaw chuck/Face Plate/Drive Dog Plate
Fixed Steady Rest (Without Clamp Plate)
Coolant System, can be heard running

We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job before purchase.

This Lathe is in our warehouse so please feel free to pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or having machinery surplus to requirements, we would appreciate the opportunity to assist in any way we can.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

TAKANG TK 330

We have a Bridgeport J1 Turret Milling Machine for sale

Stock # 4140

This Bridgeport turret mill was manufactured in the UK by Adcock & Shipley & is in good used condition.

Specifications are as follows
Table size 42 (1067mm) x 9 (228mm)
Spindle Speeds 67 to 2300 rpm
Spindle taper turret R8
Motor Hp/Kw 1.5 hp
Power requirements 3 phase 415 volt
Dimensions for Transport 1.6m x 1.5m x 2m high
Weight 1.25 tons

Feature/comes with
Quill feed
X axis power feed
Mitutoyo 2 axis digital readout

We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment.

Are you considering selling your machinery?

We buy as well as sell machinery. Downsizing, relocating, closing down, or having surplus equipment. We are always on the lookout for quality machinery to buy. Please do not hesitate to contact us to discuss your machinery needs and how we can help you.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

BRIDGEPORT J1 TURRET MILLING MACHINE

Find Engineering - Fabrication For Sale from $5,000 to $10,000 from Newmac Equipment.

Engineering - Fabrication For Sale from $5,000 to $10,000

Newmac Equipment

Sale Price

1991 DEVLIEG 3H-48 Spiramatic CNC jigmill

REPCO POWER S6A AUTOMATIC SURFACE GRINDING MACHINE

TETLOW K11A

HOLKE F10-V

MAZAK QUICK TURN 8G CNC LATHE

JACK MILL J40 TOOL & CUTTER GRINDER

IEMCA TS 560/61/P

3MM 430 X 850

PEDDINGHAUS 150 TON HYDRAULIC PRESS

SERVIAN JF23 60A C FRAME POWER PRESS

TAKANG TK 330

BRIDGEPORT J1 TURRET MILLING MACHINE

Newmac Equipment

Dealer Address