Newmac Equipment

HWC 110 Horizontal Borer for sale.

Stock # 3924

Specifications are as follows

Origin, Polish made
Max boring Dia. 600mm
Max length of hole 840mm
Max  facing Dia 1000mm
Max turning Dia 1000mm
Faceplate to stay 3000mm
Table size 1200mm x 1400mm
Boring stay bush Dia. 100mm
Longitudinal travel 1550mm
Cross  travel 1200mm
Vertical travel 1150mm
Spindle taper morse taper 6
Max weight on table 3 tons
Tailstock included
Origin Polish
Power requirements 3 phase 415 volt
Overall dimensions 6.8m x 2m x 3.6m high
Weight 26 tons
Please note an important consideration for this machine is the need to
excavate a hole in the foundation for the counterweight to go up & down in.

Please note that we are advertising this HWC horizontal borer on behalf of its owner, and it is now located in our warehouse. We are happy to arrange and recommend customers inspect the machine. This way, you can make an informed decision and feel confident in your investment.

Please dont hesitate to contact us if you have any questions.

Machine Inspection and Information

Feel free to call us for more information and price or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery and surplus equipment. If you are downsizing, relocating, closing down, or have machinery surplus to requirements, we would appreciate the opportunity to assist in any way we can.

Freight and Insurance Reminder

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment.

We strongly advise that customers speak with their usual insurance company to take out transport insurance.

DABROWSKA HWC 110 HORIZONTAL BORING MACHINE

We have a 100mm x 1400mm Belt Linisher for sale

Specifications
Belt width 100mm
Approx. distance between the drive wheel & idler 1400mm
Machine Voltage 415 volt
Overall dimensions for Transport 1.5m x 0.9m x 2.3m high
Machine Weight Approx. 400kgs

Features
Belt can be adjusted from horizontal to vertical

We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job before purchase.

This milling machine is in our warehouse so please feel free to call us for more information & price or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or having machinery surplus to requirements, we would appreciate the opportunity to assist in any way we can.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

UNKNOWN 100MM X 1400MM LINISHER

We have a large quantity of used BT50 tooling for sale. Price $200+GST Each Price reduced for quick sale $100+GST Each

UNKNOWN BT50 TOOLING

We have a Bridgeport J1 Turret Milling Machine for sale

Stock # 4140

This Bridgeport turret mill was manufactured in the UK by Adcock & Shipley & is in good used condition.

Specifications are as follows
Table size 42 (1067mm) x 9 (228mm)
Spindle Speeds 67 to 2300 rpm
Spindle taper turret R8
Motor Hp/Kw 1.5 hp
Power requirements 3 phase 415 volt
Dimensions for Transport 1.6m x 1.5m x 2m high
Weight 1.25 tons

Feature/comes with
Quill feed
X axis power feed
Mitutoyo 2 axis digital readout

We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment.

Are you considering selling your machinery?

We buy as well as sell machinery. Downsizing, relocating, closing down, or having surplus equipment. We are always on the lookout for quality machinery to buy. Please do not hesitate to contact us to discuss your machinery needs and how we can help you.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

BRIDGEPORT J1 TURRET MILLING MACHINE

We have for sale a Churchill NB Hydraulic Surface Grinder

Stock # 3940

Manufactured in Engand .Despite being a used machine its in good usable condition, ensuring that it can meet most grinding requirements. This machines robust construction, coupled with English engineering, makes it a valuable addition to any machining workshop. 

Specifications are as follows

Table size 600mm x 150mm
Magnetic chuck size 380mm x 150mm
Max grinding wheel dia. 200mm
Power requirements, 3 phase 415 volt
Overall dimensions 1500mm x 11150mm x 1700mm high
Weight 1 Tonne
Click here for a printable pdf report (opens in new tab)

This surface grinder is in our warehouse so please feel free to pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery, if you have machines surplus to requirements or you are closing down, please feel free to contact us here at Newmac Equipment.

A note to all prospective customers. We are happy to get freight quotes anywhere in Australia or worldwide. If the sale of any machine goes ahead, please note the machines are not insured during transport by either the transport companies or Newmac Equipment. It is advised customers talk to their usual insurance company to take out transport insurance.

CHURCHILL NB SURFACE GRINDING MACHINE

We are pleased to offer a used, Jones & Shipman 1307 cylindrical grinder for sale.

Jones & Shipman was a UK based company that  manufactured grinding machines for more than a century. Jones & Shipman produced a wide range of grinding machines, including cylindrical, surface, and tool grinders, which are known for their robust construction, precision, and reliability. Jones & Shipman grinders are highly regarded in the manufacturing industry for their quality, durability, and exceptional performance. Dont miss the opportunity to own this cylindrical grinder at an affordable price. Contact us today to learn more about this product.

Specifications are as follows

356mm swing
1,016mm between centres
Comes with

Coolant system
Internal grinding attachment
Work steady
3 jaw chuck
Other accessories as per photos

This  cylindrical grinder is in our warehouse, please feel free to call us on  for more information or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery, if you have machines surplus to requirements or you are closing down, please feel free to contact us here at Newmac Equipment

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

JONES & SHIPMAN 1307 UNIVERSAL CYLINDRICAL GRINDER

We are excited to offer an excellent re-conditioned Waldown 8SN Series III Pedestal Drill for sale. which is proudly Australian-made.

This top-quality machine is a testament to the quality craftsmanship that Australia is known for and is ideal for use in manufacturing, workshops, or home applications. Dont miss out on this rare opportunity to acquire a top-quality drill that has been expertly reconditioned.

 

Specifications are as follows:

Table size 240 x 275mm
Max drill size in mild steel 13mm
Distance from spindle to column 200mm
Spindle taper morse taper 2
Quill travel 90mm
Spindle Motor 0.5hp
Machine voltage, single phase 240 volt
Overall dimensions 600mm x 360mm x 1800mm high
Weight 200kg approx

We have run this machine & all works well.

We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job prior to purchase.

This drilling machine is in our warehouse so please feel free to call us for more information & price or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or having machinery that is surplus to requirements, we would appreciate the opportunity to assist in any way we can.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

The slide show below can be paused by hovering the mouse cursor over the current photo. It will resume when the cursor is moved off the photo.

WALDOWN 8SN SERIES III

We have a good working condition Promecam GTH 425 Hydraulic Guillotine for sale

Specifications are as follows
Capacity 2.5m x 4mm
Machine Voltage 415 volt
Dimensions for Transport 3m x 1.9m x 1.7m high
Weight Approx. 5 tons
Please click here for a printable pdf report & price (opens in new tab)

We have had this guillotine running & all works well

This guillotine is in our warehouse so please feel free to contact us or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery, if you have machines surplus to requirements or you are closing down, please feel free to contact us here at Newmac Equipment.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

PROMECAM GTH 425 HYDRAULIC GUILLOTINE

We have a King Rich V 2000 Vertical turret milling machine for sale.

Stock # 4136

Specifications are as follows

Table size 1220mm x 250mm
XYZ travel 800 / 400 / 406 mm
Spindle speeds Low Range 60  500rpm  High Range 500  4200rpm
R8 Spindle
Motor Hp/Kw 3HP
Power requirements 415 volt, 3 phase
Overall dimensions 1.6m x 1.7m x 2.1m high
Weight 1.5 Tonne

Features/Accessories

Variable X-axis power feed
2 axis digital read out
Coolant system
Worklight

We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment.

Are you considering selling your machinery?

We buy as well as sell machinery. Downsizing, relocating, closing down, or having surplus equipment. We are always on the lookout for quality machinery to buy. Please do not hesitate to contact us to discuss your machinery needs and how we can help you.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

KING RICH V2000 TURRET MILLING MACHINE

We have a used Peddinghaus 150 ton hydraulic press for sale. 

Specifications are as follows
Working table area 380mm x 380mm
Tonnage approx. 150 tonne
Max height under the ram 250mm (could be increased by removing a part on the bottom of the ram)
Power requirements 415 volt
Dimensions 1.1m x 0.9m x 3m (could be reduced for transport to 2.45m by removing the hydraulics from the top of the press)
Weight approx. 1.5 tonnes

We have had this hydraulic press running & all works well.

We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment.

We would like to extend a note to all prospective customers. We are happy to provide freight quotes for machines to be shipped anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance. 

Considering selling your machinery?

We buy as well as sell machinery. Downsizing, relocating, closing down, or having surplus equipment, we would be pleased to assist you. We are always on the lookout for quality machinery to buy and can offer you a fair price for your equipment. Please do not hesitate to contact us to discuss your machinery needs and how we can help you. We look forward to hearing from you.

PEDDINGHAUS 150 TON HYDRAULIC PRESS

We have a Goetz 22C Inclinable C Frame Power Press for sale

Specifications are as follows
Type C frame press
Model 22c
Capacity 22 tons
Strokes per min 110
Overall dimensions 1.6m x 950mm x 2m high
Weight 1.7 tons

We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment, knowing youre making a smart choice for your business.

Are you considering selling your machinery? We buy as well as sell machinery. Downsizing? relocating? closing down? or having surplus equipment. We are always on the lookout for quality machinery to buy. Please do not hesitate to contact us to discuss your machinery needs and how we can help you. Your success is our priority.

We want to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance. Your peace of mind is essential to us, and were here to support you every step of the way.

GOETZ 22C INCLINABLE C FRAME PRESS

We have in good condition an Australian Made Hebco 27/9 Pedestal Grinder

300mm x 50mm Wheel Diameter
Three Phase 415 Volt Motor

We have run this machine & all works well.

We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job prior to purchase.

This drilling machine is in our warehouse so please feel free to  pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or having machinery that is surplus to requirements, we would appreciate the opportunity to assist in any way we can.

A note to all prospective customers. We are happy to get freight quotes anywhere in Australia or worldwide. If the sale of any machine goes ahead, please note the machines are not insured during transport by either the transport companies or Newmac Equipment. It is advised customers talk to their usual insurance company to take out transport insurance.

HEBCO 27/9

Find Plant and Equipment For Sale. Browse 181 listings from Newmac Equipment.

New & Used Plant and Equipment For Sale

Newmac Equipment

Sale Price

DABROWSKA HWC 110 HORIZONTAL BORING MACHINE

UNKNOWN 100MM X 1400MM LINISHER

UNKNOWN BT50 TOOLING

BRIDGEPORT J1 TURRET MILLING MACHINE

CHURCHILL NB SURFACE GRINDING MACHINE

JONES & SHIPMAN 1307 UNIVERSAL CYLINDRICAL GRINDER

WALDOWN 8SN SERIES III

PROMECAM GTH 425 HYDRAULIC GUILLOTINE

KING RICH V2000 TURRET MILLING MACHINE

PEDDINGHAUS 150 TON HYDRAULIC PRESS

GOETZ 22C INCLINABLE C FRAME PRESS

HEBCO 27/9

Newmac Equipment

Dealer Address