Newmac Equipment

Custom built 250 ton Hydraulic 4 poster Press for sale

Specifications are as follows
Press type 4 poster hydraulic
The working area of the table size between posts is 510mm x 360mm
Max height under the ram 280mm
Power requirements 415 volt
Motor KW 2 off, one 7.5kw & one 5.5kw
Dimensions 2.2m x 1.1m x 2.6m high
Approx. weight 2.5 tons

We have had the machine running & it is in working condition, but the hydraulics are noisy

In addition to this Custom built 250 ton Hydraulic 4 poster Press, our warehouse proudly houses one of the largest inventories of used machinery in the country. We invite you to explore our website, where we consistently update our stock, offering a great selection of engineering machinery and equipment for sale.

We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment.

Considering selling your machinery? We buy as well as sell machinery. Downsizing, relocating, closing down, or having surplus equipment. We are always on the lookout for quality machinery to buy. Please do not hesitate to contact us to discuss your machinery needs and how we can help you.

We would like to extend a note to all prospective customers. We are happy to provide freight quotes for machines to be shipped anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

CUSTOM CUSTOM BUILT 250 TON HYDRAULIC 4 POSTER PRESS

We have in good condition an Australian Made Hebco 27/9 Pedestal Grinder

300mm x 50mm Wheel Diameter
Three Phase 415 Volt Motor

We have run this machine & all works well.

We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job prior to purchase.

This drilling machine is in our warehouse so please feel free to  pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or having machinery that is surplus to requirements, we would appreciate the opportunity to assist in any way we can.

A note to all prospective customers. We are happy to get freight quotes anywhere in Australia or worldwide. If the sale of any machine goes ahead, please note the machines are not insured during transport by either the transport companies or Newmac Equipment. It is advised customers talk to their usual insurance company to take out transport insurance.

HEBCO 27/9

We have a good as new condition DS Coventry Die Head for sale

Specification are as follows

Takes Coventry 5/16 Chasers
3/4 Shank
Complete with Metal Case
Manufactured in England (Hampson Alamein Ltd)

This DS Coventry Die Head lathe is in our warehouse so please feel free to pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment, if you have one machine or a quantity of machines you want to sell, please feel free contact us here at Newmac Equipment.

HAMPSON ALAMEIN LTD DS

HWC 110 Horizontal Borer for sale.

Stock # 3924

Specifications are as follows

Origin, Polish made
Max boring Dia. 600mm
Max length of hole 840mm
Max  facing Dia 1000mm
Max turning Dia 1000mm
Faceplate to stay 3000mm
Table size 1200mm x 1400mm
Boring stay bush Dia. 100mm
Longitudinal travel 1550mm
Cross  travel 1200mm
Vertical travel 1150mm
Spindle taper morse taper 6
Max weight on table 3 tons
Tailstock included
Origin Polish
Power requirements 3 phase 415 volt
Overall dimensions 6.8m x 2m x 3.6m high
Weight 26 tons
Please note an important consideration for this machine is the need to
excavate a hole in the foundation for the counterweight to go up & down in.

Please note that we are advertising this HWC horizontal borer on behalf of its owner, and it is now located in our warehouse. We are happy to arrange and recommend customers inspect the machine. This way, you can make an informed decision and feel confident in your investment.

Please dont hesitate to contact us if you have any questions.

Machine Inspection and Information

Feel free to call us for more information and price or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery and surplus equipment. If you are downsizing, relocating, closing down, or have machinery surplus to requirements, we would appreciate the opportunity to assist in any way we can.

Freight and Insurance Reminder

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment.

We strongly advise that customers speak with their usual insurance company to take out transport insurance.

DABROWSKA HWC 110 HORIZONTAL BORING MACHINE

We have a Waldown 2M Pedestal Drill for sale, which is proudly Australian-made.

This top-quality machine is a testament to the quality craftsmanship that Australia is known for and is ideal for use in manufacturing, workshops, or home applications. Dont miss out on this rare opportunity to acquire a top-quality drill that has been expertly reconditioned.



Stock # 4156

Specifications are as follows:

Table size 300 x 300mm
Max drill size in mild steel 13mm
Distance from spindle to column 180mm
Adjustable Drill Height
Spindle taper morse taper 2
Quill travel 80mm
Spindle Motor 1hp
Machine voltage, three phase 415 volt
Overall dimensions 600mm x 360mm x 1800mm high
Weight 200kg approx

We have run this machine and all works well

We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job prior to purchase.

This drilling machine is in our warehouse so please feel free to call us for more information & price or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or having machinery that is surplus to requirements, we would appreciate the opportunity to assist in any way we can.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

WALDOWN 2M

We have a Iemca TS 560 61 P Magazine Barfeeder for sale.
Now on sale, price reduced from $5000+GST to $2500+GST

General Specifications

Max Bar Capacity 70mm
Magazine load 10-70mm Bar
Chain Feed with drive motor
6m Bar Length
Overall dimensions 8,300mmm x 700mm x 1,800mm high
Weight appox 1,500kgs
This Iemca Magazine Barfeeder is in our warehouse so please feel free to call us on  for more information & price or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment, if you have one machine or a quantity of machines you want to sell, please feel free to give us a ring.

IEMCA TS 560/61/P

We have a X6232 CX16 Universal milling machine for sale

Stock # 4118

Specifications are as follows

Table size 1600mm x 320mm
XYZ travels 800 x 240 x 300mm
Features power feeds on X,Y & Z axis
Vertical head spindle speeds 9 speeds 125 to 2000 rpm
Horizontal spindle speeds 30 to 1500 rpm
Spindle tapers vertical NT40, horizontal NT50
Motor Hp/Kw Vertical head motor 3.0kw, Horizontal 5.0kw
Machine Voltage 415 volt
Overall dimensions 2.1m x 2.3m x 1.9m high
Weight 3 tonnes
Comes with the following accessories

Coolant System
1 horizontal arbor
1 Arbor support
Dividing Head with power take off


We have run this machine and all is working, although it can be difficult to select & change feed rates. We have sold approximately 10 of these machines over the years & they have all been the same, so this is typical of these machines.

In addition to this  X6232 Universal milling machine, our warehouse proudly houses one of the largest inventories of used machinery in the country. We invite you to explore our , where we consistently update our stock, offering a great selection of engineering machinery and equipment for sale.

We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment.

Considering selling your machinery? We buy as well as sell machinery. Downsizing, relocating, closing down, or having surplus equipment. We are always on the lookout for quality machinery to buy. Please do not hesitate to contact us to discuss your machinery needs and how we can help you.

We would like to extend a note to all prospective customers. We are happy to provide freight quotes for machines to be shipped anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

CHANG ZHENG MACHINE TOOL WORKS X6232 CX16

We have an Australian-made, good used condition, MIGOMAG M325 mig welder for sale.

Duty rating 325amps at 60% duty cycle
Power requirements 415 volt, 3 phase

We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job prior to purchase.

Please feel free to call us for more information & price or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or having machinery that is surplus to requirements, we would appreciate the opportunity to assist in any way we can.

A note to all prospective customers. We are happy to get freight quotes anywhere in Australia or worldwide. If the sale of any machine goes ahead, please note the machines are not insured during transport by either the transport companies or Newmac Equipment. It is advised customers talk to their usual insurance company to take out transport insurance.

MIGOMAG M325 MIG WELDING MACHINE

We have a Servian Z3040 x 16 radial arm drilling machine for sale.

Specifications are as follows

Box table size 640mm x 510mm x 500mm high
Max drilling capacity in mild steel 40mm
Distance from centre of the spindle to the column Max 1600, Min 350mm
Distance from base plate to spindle nose Max 1250mm, Min 350mm
Distance from table to spindle nose Max 750mm,Spindle Speeds 25 to 2000 rpm
Feeds 16 automatic feed rates
Morse taper # 4
Quill travel 315mm
Motor Hp/Kw 4hp / 3kw
Power requirements 3 phase, 415 volt
Overall dimensions for transport, with arm lowered 2.5m x 1m x 2.65m high
Weight 3.5 tons

Testing of Machinery  Try Before You Buy

We are happy to test-run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job prior to purchase.

This machine is in our warehouse so feel free to pop in to inspect the machine at your convenience or give us a ring for more information.

Thinking of selling your used or surplus equipment? Looking at Downsizing, Relocating, Closing Down or have machinery that is surplus to requirements. We are always looking for machinery to buy, so would appreciate the opportunity to assist in any way we can.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

SERVIAN Z3040 X 16 RADIAL ARM DRILLING MACHINE

We have a Waldown Horizontal MT2 drilling machine for sale. Typically used for second op deburring or bar ending.

Features

Morse taper 2 spindle
Requires 3 phase 415 volt power

We recommend customers pay our warehouse visit to inspect machinery, where we are happy to test run machines under power, that way it gives you peace of mind that the machine will do your job prior to purchase.

This machine is in our warehouse so please feel free to call us for more information & price or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing down or have machinery that is surplus to requirements, we would appreciate the opportunity to assist in any way we can

WALDOWN HORIZONTAL

We have for sale a Tsugami T-ROL6 Thread Rolling Machine

Stock #4031

This machine is suitable for mass production of small threads, worms, knurls and serrations

Specifications

Work Range

Max Thread Pitch 2.5mm (10TPI)
Max Modul (diametrical pitch) 1.5m (16DP)
Max Roll Length 60mm (21/4)
Max Diameter 45mm (1-3/4?)
Max Elongation 8%
Roll Spindle Speeds 38rpm and 58rpm  50Hz

Roll Dies

Max Diameter 150mm 
Bore Diameter 54mm 
Roll Width 40,60mm
Motors

For Roll Spindle 2hp 1,500rpm
For Hydraulic Pump 1 hp 1,500rpm
For Coolant Pump 0.2hp 3,000rpm
Dimensions for Transport 1,130 x 905 x 1,015mm (High)
Weight 1,230kg

Accessories 

Comes with the following sets of thread Rolls

3/16 BSW 24 x 60
1/2 BSW 12 x 60
1/4 UNC 20 x 60
5/16 UNC 18 x 60
3/8 UNC 16 x 60
M6 x 1.0mm
M8 x 1.25mm
M10 x 1.5mm

We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job prior to purchase.

This centre lathe is in our warehouse so please feel free to call us on  for more information & price or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or have machinery that is surplus to requirements, we would appreciate the opportunity to assist in any way we can.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

TSUGAMI T-ROL6

We have a used Australian Made Aerovent B440 Mist Extractor for sale. This extractor was designed to remove coolant mist from a large CNC Milling Machine

Specifications are as follows:

Model B4400
Weight: 500kgs Approx
External Dimensions (W x D x H): 2,400 x 1600 x 2200mm
Requires 415 volt, 3 phase power

For customers who wish to pay us a visit, we are happy to test run machinery, that way it gives you peace of mind that the machine will do your job prior to purchase.

This mist extractor is in our warehouse. Please feel free to call us for more information or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment, if you have one machine or a quantity of machines you want to sell, please feel free contact us here at Newmac Equipment.

AEROVENT B4400

Find Plant and Equipment For Sale. Browse 195 listings from Newmac Equipment.

New & Used Plant and Equipment For Sale

Newmac Equipment

Sale Price

CUSTOM CUSTOM BUILT 250 TON HYDRAULIC 4 POSTER PRESS

HEBCO 27/9

HAMPSON ALAMEIN LTD DS

DABROWSKA HWC 110 HORIZONTAL BORING MACHINE

WALDOWN 2M

IEMCA TS 560/61/P

CHANG ZHENG MACHINE TOOL WORKS X6232 CX16

MIGOMAG M325 MIG WELDING MACHINE

SERVIAN Z3040 X 16 RADIAL ARM DRILLING MACHINE

WALDOWN HORIZONTAL

TSUGAMI T-ROL6

AEROVENT B4400

Newmac Equipment

Dealer Address