Newmac Equipment

We have a  good used condition, ESAB Speeder Compact 400 Mig welder for sale.

Duty rating 400amps at 35% duty cycle
Power requirements 415 volt, 3 phase
Click here for a printable (pdf) report & price, which will open in a new tab

We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job prior to purchase.

Please feel free to pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or having machinery that is surplus to requirements, we would appreciate the opportunity to assist in any way we can.

A note to all prospective customers. We are happy to get freight quotes anywhere in Australia or worldwide. If the sale of any machine goes ahead, please note the machines are not insured during transport by either the transport companies or Newmac Equipment. It is advised customers talk to their usual insurance company to take out transport insurance.

ESAB SPEEDER COMPACT 400

We have in used condition a Chalmers & Corner Manual Box Pan Folder for sale

Bending Length 930mm
Mild Steel Capacity 1.0mm
Manual Operation
Dimensions for Transport 1320 x 530 x 1300mm (L x W x H)
Weight 100kg
Please click here for printable pdf & price (opens in new tab)
Comes Complete With
Full Set of Tooling

For more information & price please pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment, if you have one machine or a quantity of machines you need to sell, please feel free contact us here at Newmac Equipment

We would like to extend a note to all prospective customers. We are happy to provide freight quotes for machines to be shipped anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

CHALMERS & CORNER BOX PAN FOLDER

We have a used Keiyo  Seiki KM 1800 Centre Lathe  for sale

On special price reduced to $3000+GST

While the machine is functional, we want to make sure youre fully informed about its condition. There is some wear on the slideways, & the main traverse handle has seen better days which has resulted in it being sloppy.

We take great care to provide accurate descriptions of our machines and want to ensure our customers have all the information they need to make an informed purchase decision. Due to the wear and tear on the lathe, we have reduced the price to reflect this issue.

Specifications are as follows

Swing over the bed 440mm
Swing over the saddle 240mm
Approx. swing in the gap 660mm
Distance between centres 1200mm
Spindle bore 50mm
Spindle mount, A Type Bolt On
Spindle speeds 30 to 1500 rpm
Machine voltage required 415 volt
Overall dimensions including coolant tank 2,350mm x 900mm x 1,450mm high
Weight 1.5 tons
Year of Manufacture 1968
Features

Imperial dials
Gap bed
Foot brake
Comes with the following accessories

3 Jaw chuck
Solid tool post
Travelling steady
Chuck guard
Coolant system
Work light
We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job prior to purchase.

This centre lathe is in our warehouse so please feel free to pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or have machinery that is surplus to requirements, we would appreciate the opportunity to assist in any way we can.

KEIYO SEIKI KM 1800

We are pleased to offer a used, Jones & Shipman 1300 Universal Cylindrical Grinder for sale.

Stock #3969

Jones & Shipman was a UK based company that manufactured grinding machines for more than a century. Jones & Shipman produced a wide range of grinding machines, including cylindrical, surface, and tool grinders, which are known for their robust construction, precision, and reliability. Jones & Shipman grinders are highly regarded in the manufacturing industry for their quality, durability, and exceptional performance. Dont miss the opportunity to own this cylindrical grinder at an affordable price. Contact us today to learn more about this product.

Specifications are as follows

254mm swing
686mm between centres
Comes with

Coolant system
Internal grinding attachment
Work steady
DRO

This cylindrical grinder is in our warehouse, please feel free to call us for more information or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery, if you have machines surplus to requirements or you are closing down, please feel free to contact us here at Newmac Equipment

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

JONES & SHIPMAN 1300

We have a good working condition Macson 18?Swing Centre Lathe for sale

Specifications are as follows

Swing Over Bed 490mm

Swing Over Saddle 190mm

Distance Btw Ctrs Approx.1150mm

Spindle Bore 80mm

Spindle mount Camlock D1-8

Spindle Speeds 32 to 1100rpm

Power requirements 3 phase 415 volt

Overall dimensions 3.2m x 1.7m x 1.3m

Approx. weight 3 tons

Features imperial dials & lead screw


Accessories

4 Jaw chuck & face plate

4 way solid tool post

Thread Chasing
Dial

Hydraulic copy attachment


The condition of this Macson lathe is generally good. The hydraulic copy attachment needs new a hose fitting & testing
Faults  None found.

We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment.

Considering selling your machinery? We buy as well as sell machinery. Downsizing, relocating, closing down, or having surplus equipment. We are always on the lookout for quality machinery to buy. Please do not hesitate to contact us to discuss your machinery needs and how we can help you.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

MACSON 18" CENTRE LATHE

We have for Sale in working order an EMF Resistance Spot Welder

Specifications are as follows:

Max Control Thermal Rating 5.2KVA
380mm throat
400V Single Phase
Foot switch
Water Cooled

This Spot Welder is in our warehouse so please feel free to  pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or have machinery that is surplus to requirements, we would appreciate the opportunity to assist in any way we can.

EMF TAE 5.2KVA

We have a used Peddinghaus 150 ton hydraulic press for sale. 

Specifications are as follows
Working table area 380mm x 380mm
Tonnage approx. 150 tonne
Max height under the ram 250mm (could be increased by removing a part on the bottom of the ram)
Power requirements 415 volt
Dimensions 1.1m x 0.9m x 3m (could be reduced for transport to 2.45m by removing the hydraulics from the top of the press)
Weight approx. 1.5 tonnes

We have had this hydraulic press running & all works well.

We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment.

We would like to extend a note to all prospective customers. We are happy to provide freight quotes for machines to be shipped anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance. 

Considering selling your machinery?

We buy as well as sell machinery. Downsizing, relocating, closing down, or having surplus equipment, we would be pleased to assist you. We are always on the lookout for quality machinery to buy and can offer you a fair price for your equipment. Please do not hesitate to contact us to discuss your machinery needs and how we can help you. We look forward to hearing from you.

PEDDINGHAUS 150 TON HYDRAULIC PRESS

We have a used Transmig 200 Mig welder for sale.

Requires 415 volt power

Max 200 amp

CIG TRANSMIG 200

We have a Diamant Boart Tile Saw for sale.

Specification are as follows

Model Diamant Boart
Manual Traversing Table
Table size 440mm x 400mm
Requires 3 phase 415 volt power
Single Speed
Bench Size 1230 x 650 x 860mm (L X W xH)
Testing of Machinery  Try Before You Buy

We are happy to test run machinery in our warehouse, that way it gives you piece of mind that the machine will do your job prior to purchase.

This machine is in our warehouse so feel free to pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery, if you have machines surplus to requirements or you are closing down, please feel free to contact us here at Newmac Equipment

DIAMANT BOART DIAMAND SAW

Goodway GW 1440 Centre lathe for sale.

Specifications are as follows
Swing over the bed 350mm
Swing over the saddle 200mm
Swing in the gap approx. 550mm
Distance between centres 1m
Spindle bore 40mm
Spindle mount, camlock D1-5
Power requirements, 3 phase 415 volt
Overall dimensions 2.1m x 0.9m x 1.3m high

Comes with the following accessories
3 jaw self centring chuck
4 jaw self centring chuck
Solid tool post
Foot brake
Coolant system

We have run the lathe, all works well & the condition is good.

We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment, knowing youre making a smart choice for your business.

Considering selling your machinery? We buy as well as sell machinery. Downsizing, relocating, closing down, or having surplus equipment. We are always on the lookout for quality machinery to buy. Please do not hesitate to contact us to discuss your machinery needs and how we can help you. Your success is our priority.

We want to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance. Your peace of mind is essential to us, and were here to support you every step of the way.

GOODWAY GW 1440 CENTRE LATHE

We have a Hartford HV 60A Vertical Machining Centre for sale.

Stock # 4044

Specifications are as follows:
X Axis travel 1400 mm
Y Axis travel 680 mm
Z Axis travel 600mm
CNC control Fanuc OM
Table length 1500 mm
Table width 630 mm
Spindle taper BT50
Max. spindle speed 4,000 rpm
Spindle motor power 15 kW
Power requirements, 3 phase,  415 volt
Year of manufacture 1994
Weight 12,000 kg
Overall dimensions  3,920mm x 2,700mm x 2,940mm (High)

Comes with/accessories
Chip conveyors
Work light
24 position ATC
Transformer
Spindle Cooling Unit

We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment. We pride ourselves on providing exceptional customer service and believe that this personalized approach allows us to exceed your expectations.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

Considering selling your machinery?

We are always interested in purchasing metalworking machinery & surplus equipment, if you have one machine or a number of machines you need gone, please feel free contact us here at Newmac Equipment.

HARTFORD HV 60A VERTICAL MACHINING CENTRE

We have a used Heald De-Magnetiser for Sale

Table Size 250mm x 380mm
240 Volt
Physical Size 530mm x 340mm x 290mm (L x W x H)

HEALD DE-MAGNETISER

Find Engineering - Fabrication For Sale. Browse 189 Engineering - Fabrication listings from Newmac Equipment.

New & Used Engineering - Fabrication For Sale in Australia

Newmac Equipment

Sale Price

ESAB SPEEDER COMPACT 400

CHALMERS & CORNER BOX PAN FOLDER

KEIYO SEIKI KM 1800

JONES & SHIPMAN 1300

MACSON 18" CENTRE LATHE

EMF TAE 5.2KVA

PEDDINGHAUS 150 TON HYDRAULIC PRESS

CIG TRANSMIG 200

DIAMANT BOART DIAMAND SAW

GOODWAY GW 1440 CENTRE LATHE

HARTFORD HV 60A VERTICAL MACHINING CENTRE

HEALD DE-MAGNETISER

Newmac Equipment

Dealer Address