Newmac Equipment

We have a KSX3 Sieg CNC vertical machining centre for sale

Stock # 4205

Technical Data Snapshot

Year of manufacture 2018
Table size 550mm x 160mm
X/Y/Z travel 300mm x 120mm x 270mm
Control Type PC Based Sieg CNC Milling Software
Max spindle speed 5,000rpm
Spindle taper R8
Spindle Motor Hp/Kw 1.3hp, 1kw
Machine power requirements 240 volt
Machine Dimensions for Transport, including cabinet 1300 wide x 850 x 1900mm high
Weight Approx. 500kgs

Includes the following accessories, which were optional extras when the machine was new.

Full interlocked enclosure
MPG handwheel
Coolant Pump and Tank
Worklight
Work vice

We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment.

Considering selling your machinery? We buy as well as sell machinery. Downsizing, relocating, closing down, or having surplus equipment. We are always on the lookout for quality machinery to buy. Please do not hesitate to contact us to discuss your machinery needs and how we can help you.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise customers to take out transport insurance with their usual insurance company.

SIEG KXS3

AM Machinery 3.2m x 6mm Hydraulic Swing Beam Guillotine for sale

Fitted with NC backgauge control and rear safety guarding.
This machine is suited to general sheet-metal cutting up to 6 mm mild steel over 3200 mm length.

Specifications
Cutting Capacity: 6 mm mild steel
Cutting Length: 3200 mm
Construction: Swing beam shearing action
Hydraulic Operation
Motorised backgauge, NC controlled
Foot-pedal operation
Rapid stroke adjustment
Adjustable blade clearance
Approx. machine weight: 6 tonnes (as marked on machine tag)
Power requirements 3 phase 415 volt
Overall dimensions for transport (Front sheet supports removed)
Year of Manufacture 2007

Control System
NC backgauge controller (E21-style)
Digital backgauge readout
Keyed power/mode switch
Start and stop push buttons
Digital stroke counter
Adjustable stroke-time dial
Roving foot pedal

Safety Features
Rear safety guarding as shown in the photos
Front finger guard
Emergency stop button on the main panel & the foot pedal
Hydraulic pressure gauge for monitoring system pressure

Condition
The machine has been checked and operated in our workshop.
All major functions run.

Included
Motorised NC backgauge
Foot-pedal
Rear guarding

We have had this guillotine running & all works well

This guillotine is in our warehouse so please feel free to call us or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery, if you have machines surplus to requirements or you are closing down, please feel free to contact us here at Newmac Equipment.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

AM MACHINERY QC12Y

We have a Colchester Triumph 2000 centre lathe for sale

Stock # 4669

This machine was purchased new by a Melbourne hospital and used only for general maintenance work within their workshop. It presents in excellent used condition.

About Colchester Lathes

Colchester is one of the most recognised and respected names in the world of manual centre lathes. Established in the United Kingdom in 1917, Colchester built its reputation on producing robust, accurate and reliable machines designed for both industrial production and precision toolroom work.
The Triumph series, in particular, became a benchmark in many engineering shops due to its solid construction, long service life, and ease of operation. Colchester lathes are known for their excellent spindle accuracy, intuitive controls and strong parts support, making them a favourite across education, maintenance, fabrication and manufacturing environments.

Specifications
Country of origin: England

Swing over bed: 390 mm

Swing over saddle: 240 mm

Swing in gap: 580 mm

Distance between centres: 1250 mm

Spindle bore: 54 mm

Spindle mount: Camlock D1-6

Spindle speed range: 25  2000 rpm

Motor: 7.5 HP / 5.5 kW

Power supply: 415 V

Overall dimensions: 2.45 m × 1.1 m × 1.3 m (H)

Approx. weight: 3 tonnes

Dials: Metric

Accessories Included
3-jaw chuck

4-jaw chuck

Faceplate

Quick-change toolpost

Fixed steady

Thread chasing dial

Additional Features
Gap bed design

All functions tested and operating correctly

Click here for additional information & price (will open a pdf in a new tab)

We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job before purchase.

This lathe is in our warehouse so please feel free to call us for more information & price or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or having machinery surplus to requirements, we would appreciate the opportunity to assist in any way we can.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

COLCHESTER TRIUMPH 2000 CENTRE LATHE

We have a Colchester Triumph Electronic  CNC Teach lathe for sale

Stock # 4169

Specifications are as follows

Fanuc 20TControl
Spindle Nose D1-6 Camlock
Spindle speed range 13 to 2500 rpm
Main motor HP/KW 10/7.5
Max Turning Dia 400mm
Max Turning length 1180mm
Hole through spindle 54mm
Supply voltage needed 415 volt
Overall dimensions Machine  2600mm x 1500mm x 1670mm High
Weight Machine approx 3000kgs
Year of Manufacture 1996

Accessories included

Quick Change Toolpost and tool holders
3 Jaw Chuck
Features

Teach in Software
Coolant system
Worklight

We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment. We pride ourselves on providing exceptional customer service and believe that this personalized approach allows us to exceed your expectations.

We welcome any inquiries about the machine and invite you to contact us at

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

Considering selling your machinery?

We are always interested in purchasing metalworking machinery & surplus equipment, if you have one machine or a number of machines you need gone, please feel free contact us here at Newmac Equipment.

1996 COLCHESTER ELECTRONIC

We have a hydraulic guillotine for sale.

We need to clear some stock to make room, so weve reduced the price of this machine for a quick sale.
Was $5,000 + GST, now $3,500 + GST.

Specifications are as follows
Width of blade 2400mm
Max material thickness 1.6mm in mild steel
Operator Foot Switch
Weight approx. 1000kgs
Overall dimension for transport 3,000m x 850m x 1,330mm high 

We have run this machine & all works well, we have taken sample cuts along the blade & the guillotine cuts without leaving burrs.

We recommend customers pay us a visit where we are happy to test run machinery, that way it gives you peace of mind that the machine will do your job before purchase.

This guillotine is in our warehouse so please feel free to pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment, therefore should you be looking at Downsizing, Relocating, Closing Down or having machinery that is surplus to requirements, we would appreciate the opportunity to assist in any way we can.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

OTHER 2.4M X 1.6MM

We have a Yang Iron 420 x 1500 Centre Lathe for sale.

Stock # 4153

Specifications are as follows
Swing Over Bed 420mm approx.
Swing Over Saddle 240mm
Swing in Gap 600mm approx.
Distance Btw Ctrs 1500mm
Spindle Bore 50mm
Spindle Mount A Mount
Spindle Speeds 12 Speed 32  1800rpm
Motor Hp/Kw 5hp/3.7kw
Power requirements, 3 phase 415 volts
Overall Dimensions 2.6m x 0.9m x 1250mm high
Transport Weight 2.5 Tonne
Year of Manufacture 1973

Features
Imperial lead screw & dials
Gap bed

Accessories
3 & 4 jaw chucks
Quick change tool post
Fixed & travelling steadies
Thread chasing dial
Foot brake
Coolant system

We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job before purchase.

This milling machine is in our warehouse so please feel free to call for more information or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or having machinery surplus to requirements, we would appreciate the opportunity to assist in any way we can.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

YANG IRON 420 X 1500 CENTRE LATHE

We have a Suhang Machinery, motorized sheet metal  decoiler for sale.

Stock # 4209

Specifications are as follows

Max coil width 300mm
Max outside coil dia 1800mm
Accommodates inside coil diameters of 450mm to 520mm 
Power requirements 3 phase, 415 volt
Max overall dimensions 2,250mm x 1300mmm x 1900mm high


For customers who wish to inspect this machine, we are happy to test-run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job before purchase.

The machine is in our warehouse so feel free to inspect the machine at your convenience.

Thinking of selling your used or surplus equipment? Looking at Downsizing, Relocating, Closing Down or have machinery that is surplus to requirements. We are always looking for machinery to buy,  so would appreciate the opportunity to assist in any way we can.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

SUHANG MACHINERY DE-COILER

We have a Woodfast Jointer planer for sale.

Stock #4185

Cutter width 150mm
Table size 1200 x 170mm
415V Three Phase
Dimensions for Transport 1200 x 500 x 960mm High
Weight 100kg


We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job before purchase.

This machine is in our warehouse so please feel free to  pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or having machinery surplus to requirements, we would appreciate the opportunity to assist in any way we can.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

WOODFAST JOINTER PLANER

We have a high-quality, used Italian-made Sicar S630A Thicknesser in good condition for sale.

Designed for accurate planing of wide boards and production work, this machine features cast-iron tables and a robust feed system  ideal for cabinet shops, joineries, and schools needing a consistent finish and easy setup.

Control Overview  What Does What
Feed speed selector (lever, lower left side panel): two-speed mechanical gearbox

Slow: for finer finish and difficult grain

Fast: for higher throughput on softwoods/straight grain

(Always change speeds with the machine stopped)

Thickness scale (left of mouth): shows the table-to-cutter distance (finished thickness), with red pointer

Table raise/lower (rocker switch ? / ? on front panel): powered rise/fall of the thicknessing table for fine setting

Indexed red selector (top of panel): quick reference dial to repeat common settings. Works with the raise/lower switch as a guide  not a digital readout

Main motor controls:

Green = Start

Red = Stop

Emergency stop (red mushroom, lower front panel): latches power off; twist to release before restarting

Main isolator (black rotary switch, lower front panel): master on/off for the whole machine

Specifications
Make/Model: Sicar S630A Thicknesser (Italy)

Maximum planing width: 630 mm

Maximum workpiece height: up to ~300 mm (typical for this class)

Table length: ~1,0001,100 mm (cast iron)

Cutterblock: 4-knife, HSS (straight)

Feed speeds: two mechanical speeds (approx. 6 & 12 m/min, model-dependent)

Main motor: approx. 7.59 kW (1012 HP), 415 V three-phase

Feed/raise motors: separate drives for feed rollers and powered table lift

Construction: cast-iron tables, heavy steel cabinet

Overall Dimensions: 1250mm x 1100mm x 1150mm high
Approx. weight: 1,200 kg

Controls: purely manual / electro-mechanical (no PLC)

Note: Specs are typical for the S630A series and may vary by year/options. Figures can be confirmed on request.

Inspection & Availability
Youre welcome to inspect this thicknesser at our Bayswater North premises during business hours. A run-up and thicknessing demonstration can be provided on request.

Business hours:

MonThu 8:30 am  4:45 pm

Fri 8:30 am  3:00 pm

Closed weekends & public holidays

We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job before purchase.

This milling machine is in our warehouse so please feel free to call us for more information & price or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or having machinery surplus to requirements, we would appreciate the opportunity to assist in any way we can.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

SICAR S630A THICKNESSER

John Heine 57H Bench Folder for sale.



Stock No: 4265

We have a quality Australian-made John Heine 57H Bench Folder available in good used condition. John Heine machinery is well known for its solid construction, reliability, and long service life, making this a great choice for light fabrication, electrical work, signage, and general sheet-metal applications.

This is a quick-acting, manual edge folder designed for accurate and repeatable folding of light-gauge materials.

Specifications

Folding capacity: 31 x 0.8 mm (soft mild steel)
Working width: Approx. 790 mm
Width of fold adjustment: 1/8 to 7/8 (approx. 3 mm to 22 mm)
Stops provided at: 45° and 90°
Operation: Manual, quick-acting clamp and fold
Net weight: 89 kg
Overall dimensions
Features

Heavy-duty cast construction
Quick-action clamping and folding
Adjustable return width for consistent results
Ideal for light fabrication, tray work, sign edging, and enclosure work
Compact bench-mounted design
Click here for additional information & price (will open a pdf in a new tab)

Inspection & Testing

Customers are welcome to inspect the machine at our Bayswater North warehouse. Where possible, we are happy to demonstrate the machine under power to give confidence prior to purchase.

Freight & Insurance

We are happy to assist with arranging freight Australia-wide or internationally. However, machines are not insured during transport by either the transport company or Newmac Equipment. We strongly recommend customers arrange their own transit insurance with their insurer.

Want to Sell Machinery?

We buy as well as sell machinery. If you are downsizing, relocating, closing down, or have surplus equipment, please feel free to contact us to discuss your requirements.

JOHN HEINE 57H BENCH FOLDER

We have an Ex TAFE, Carba-tec TSC 10HBR Tilting Arbor table saw for sale.

Stock # 4186

The Carba-tec THC 10BR is a woodworking machine designed for the precision cutting of  panels and sheet materials. It features a 260mm main saw blade.

Specifications are as follows

260mm Diameter Saw Blade
Table Size 1,020mm x 685mm
Max Cut width 760mm
Max wood thickness 70mm
Dimensions for transport 1,450 x 900 x 1,000mm High
Weight 100kg

We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment.

Considering selling your machinery? We buy as well as sell machinery. Downsizing, relocating, closing down, or having surplus equipment. We are always on the lookout for quality machinery to buy. Please do not hesitate to contact us to discuss your machinery needs and how we can help you.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

CARBATEC TSC 10 HBR

We have a Microcut 857 Turret Milling Machine for sale. Recently acquired from a Geelong TAFE. Microcut is manufactured by Buffalo Machinery (Taiwan), a well-regarded builder of machine tools known for solid construction and long service life.

Specifications
Table size: 1270mm x 255mm
Spindle speeds: 50  3750 rpm
Spindle taper: NT40
Motor: 5HP / 3.7kW
Power requirements: 3 phase, 415 volt
Overall dimensions: 1.7m x 1.5m x 2.2m high
Weight: Approx. 1.5 tonnes

Features & Accessories
X-axis Align power feed, plus table power rise
Easson 3-axis DRO (checked and working)
Coolant system included

Condition
This is an ex-TAFE training machine, presenting in good general order. The head is currently noisy and requires servicing  this will be carried out prior to sale, so the machine is supplied in proper working condition.

We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job before purchase.

This milling machine is in our warehouse so please feel free to call us for more information & price or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or having machinery surplus to requirements, we would appreciate the opportunity to assist in any way we can.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

MICROCUT 857 TURRET MILLING MACHINE

Find Engineering - Fabrication For Sale. Browse 191 Engineering - Fabrication listings from Newmac Equipment.

New & Used Engineering - Fabrication For Sale in Australia

Newmac Equipment

Sale Price

SIEG KXS3

AM MACHINERY QC12Y

COLCHESTER TRIUMPH 2000 CENTRE LATHE

1996 COLCHESTER ELECTRONIC

OTHER 2.4M X 1.6MM

YANG IRON 420 X 1500 CENTRE LATHE

SUHANG MACHINERY DE-COILER

WOODFAST JOINTER PLANER

SICAR S630A THICKNESSER

JOHN HEINE 57H BENCH FOLDER

CARBATEC TSC 10 HBR

MICROCUT 857 TURRET MILLING MACHINE

Newmac Equipment

Dealer Address