Newmac Equipment

NEW: 40-Position Multifix Style E5 Quick Change Tool Post Kit
Upgrade your lathe precision and efficiency with this high-quality E5 series Quick Change Tool Post (QCTP) system. This "Multifix" style 40-position design allows for instantaneous tool changes with a guaranteed repeat accuracy of 0.01mm, significantly reducing setup time for complex machining jobs.
Product Overview
Model: E5 (Size E)
Style: 40-Position Serrated Spline (Swiss-type design)
Condition: New
Suitability: Ideal for lathes with a 200mm  400mm swing and a centre height of 100mm  200mm.
Complete Kit Includes:
1 x 540-200 40-Position Main Tool Block
3 x 540-211 Standard Tool Holders (for square-shank turning tools)
1 x 540-220 Specialized Tool Holder (designed to accommodate boring bars)
Tooling and accessories as shown in the product photos.
Technical Specifications
Feature	Specification
Model	E5
Lathe Centre Height	100  200 mm
Lathe Swing	200  400 mm
B (Height)	12 mm
C (Width)	66 mm
D (Diameter)	132 mm
H (Adjustable Range)	32  52 mm
h (Block Height)	68 mm
S (Shank Size)	20 mm
T (Shank Size)	20 mm
Number of Holders	4 Holders Included
Nett Weight	6.2 kg
Key Benefits
Extreme Versatility: 40 different index positions allow for precise tool angling without moving the tool post.
Rigid Construction: High-grade steel construction ensures maximum rigidity under heavy cutting loads.
Time Saving: Set your tool heights once using the integrated adjustment screws and switch between tools in seconds.

HAFCO 40-POSITION MULTIFIX STYLE E5 QUICK CHANGE TOOL POST KIT

Matrix No. 37 Worm Grinding Machine for sale

This Matrix No. 37 Automatic Indexing Worm Grinding Machine is designed for precision grinding of worms and similar components. Built for high accuracy, it handles a wide range of diameters, thread pitches, and helix angles, making it suitable for both standard and large swing workpieces.

Specifications:
Maximum work diameter: 14?
Maximum diameter (large swing type): 15 ?? & 20? dia. × 6? in gap
Maximum length between centres: 20?
Maximum length from centreline of wheel to workhead centre: 19 ¾?
Maximum helix angle (RH38° or LH45°): 
Maximum pitch correction: 0.025? per ft.
Maximum lead: 12?
Finest thread: 40 TPI
Maximum work weight: 100 lb
Maximum thread length in one setting: 18?
Head & tailstock centres: No. 4 Morse
Workhead motor power: ½ HP
Wheelhead motor (grinding): 3 ? HP
Wheelhead motor (crushing): 1 ? HP
Coolant pump capacity: 12 gallons per minute
Coolant tank capacity: 30 gallons
Work speed range: 0.2  31 RPM
Workhead return speeds: 6.25, 25, or 100 RPM
Maximum number of starts indexed: 6

Accessories, as per photos

We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment.

Considering selling your machinery? We buy as well as sell machinery. Downsizing, relocating, closing down, or having surplus equipment. We are always on the lookout for quality machinery to buy. Please do not hesitate to contact us to discuss your machinery needs and how we can help you.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise customers to take out transport insurance with their usual insurance company.

MATRIX NO. 37 WORM GRINDING MACHINE

Final Opportunity  Make an Offer Before Its Scrapped

This DeVlieg 3H-48 Spiramatic CNC jigmill has been in our stock for many years, and due to its age and limited market demand, we are planning to scrap it in the near future. (it's still a working machine)

Before we proceed, were giving customers a final chance to make an offer  any reasonable offer will be considered. This could be an opportunity to salvage parts, repurpose the machine, or put it back into use at a bargain price.

If youre interested, contact us now or visit us to inspect the machine before its gone for good!

Specifications are as follows for this cnc machine:

Retro fitted with Fagor 8025/30 CNC control in 1991
spindle dia 3"
spindle taper ISO 40
table size 48" x 35"
spindle travel (Z axis) 16"
horizontal travel (X axis) 48"
vertical travel of head (Y axis) 36"
Table retraction (w axis) 16"
spindle speeds 25 to 1200 RPM
Dimensions for Transport 3.7m x 3.3m x 3.5m (L x W x H)
Approx Weight 12 Tonne

1991 DEVLIEG 3H-48 Spiramatic CNC jigmill

Woodfast DS-300 Disc Sander for sale

Specifications are as follows:

305mm Diameter Disc  Velcro Backing
Table Size 435mm x 165mm
240V Single Phase 1000W Motor
1,420rpm Disc Speed
Emergency Stop Button
Dimensions for Transport 440 x 420 x 380mm High
Weight 20kg approx

We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job before purchase.

This machine is in our warehouse and is in good working order so please feel free to pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or having machinery surplus to requirements, we would appreciate the opportunity to assist in any way we can.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

WOODFAST DS 300

We have an excellent used conditioned Waldown 8SN PWD Pedestal drill for sale.

This Waldown 8SN PWD pedestal drilling machine is in excellent working order. This is an ex-school unit and has been well looked after. Waldown drills are Australian-made and well regarded for their robust construction, reliability, and long service life, making them a popular choice for workshops, maintenance departments, and general engineering use.

This machine is a solid medium-duty pedestal drill, suitable for accurate drilling operations in steel and other materials.

Specifications are as follows

Table size 240 x 275mm
Max drill size in mild steel 13mm
Distance from spindle to column 195mm
Spindle taper morse taper 2
Quill travel 105mm
Spindle Motor 0.5hp
Machine voltage, three phase 415V
Overall dimensions 700mm x 300mm x 950mm high
Weight 130kg approx

We have test run this drill in our warehouse & it all works well.

For customers who wish to inspect this machine we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job prior to purchase.

This machine is in our warehouse so feel free to ring on  or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery, if you have machines surplus to requirements or you are closing down, please feel free to contact us here at Newmac Equipment

WALDOWN 8SN PWD

We have an Enerpac 10 Tonne air operated hydraulic press for sale

Stock # 4678

This unit is fitted with an Enerpac air-over-hydraulic system, providing controlled and consistent pressing force with minimal manual effort. Enerpac equipment is well regarded for its build quality and reliability, making this press well suited to general workshop use, maintenance work, and light industrial applications.

Specifications are as follows

Type air over oil hydraulic press
10 tonne capacity
Enerpac Hydraulic air over oil pump
Stroke 330mm
Air operated motor
Operating pressure 100psi
Overall dimensions 900 x 900 x 2,150mm
Weight 100kgs

We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment, knowing youre making a smart choice for your business.

Are you considering selling your machinery? We buy as well as sell machinery. Downsizing? relocating? closing down? or having surplus equipment. We are always on the lookout for quality machinery to buy. Please do not hesitate to contact us to discuss your machinery needs and how we can help you. Your success is our priority.

We want to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance. Your peace of mind is essential to us, and were here to support you every step of the way.

ENERPAC PAM 1022

Safeway PHV-160 Mechanical/Hydraulic Machine Vice for sale

This PHV-160 is in good used condition and fully operational. The body shows the usual signs of workshop life  paint wear and some surface rust on the castings  but the jaw faces, sliding surfaces, and spindle assembly are all in good order. The hydraulic cylinder is intact and the vice operates correctly in both mechanical and hydraulic modes.

Built from ductile iron FCD60 (equivalent to GGG60), flame-hardened to HRC 45. The vice is fitted with a hydraulic spindle system which engages once the handle is tightened, increasing clamping pressure without excessive effort. The semi-sphere segment design prevents movable jaw lift and applies a downward clamping force on the workpiece. Three pin positions in the base allow a wide clamping range without full spindle travel. Hydraulic cylinder is externally mounted for easy maintenance.

Specifications (per manufacturer data)

Jaw width: 160mm
Max. jaw opening: 310mm
Jaw height: 58mm
Max. clamping pressure: 4,000 kgf
Overall length: 750mm
Nett weight: 57kg

SAFEWAY SAFEWAY PHV-160 MECHANICAL/HYDRAULIC MACHINE VICE

We have a near-new condition, Shanghai Z3032 Radial Arm Drilling Machine for sale.

Specifications related to this radial arm drill are as follows
Box table size 600mm x 450mm x 450mm
32mm Max drilling capacity in mild steel
1015mm Max distance from the centre of the spindle to the column
Spindle Speeds 32 to 2500 rpm
8 automatic feed rates
Spindle taper, morse # 4
Quill travel Max 250mm
Motor Hp/Kw 3hp/2.2kw
Power requirements 3 phase 415 volt
Overall dimensions 1625mm x 820mm x 2.2m high
Weight 1.5 tons
Comes with a coolant system

Testing of Machinery  Try Before You Buy

We are happy to test-run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job prior to purchase.

This machine is in our warehouse so feel free to pop in to inspect the machine at your convenience or give us a ring for more information.

Thinking of selling your used or surplus equipment? Looking at Downsizing, Relocating, Closing Down or have machinery that is surplus to requirements. We are always looking for machinery to buy, so would appreciate the opportunity to assist in any way we can.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

SHANGAI Z3032 RADIAL ARM DRILLING MACHINE

Waldown 8SN Pedestal Drilling Machine for Sale

Waldown 8SN pedestal drilling machine available in excellent working order. This is an ex-school unit and has been well looked after. Waldown drills are Australian-made and well regarded for their robust construction, reliability, and long service life, making them a popular choice for workshops, maintenance departments, and general engineering use.

This machine is a solid medium-duty pedestal drill, suitable for accurate drilling operations in steel and other materials.

Specifications:

Table size: 240 mm x 270 mm
Typical drilling capacity (mild steel): 20 mm
Spindle taper: Morse Taper No. 2
Quill travel: 100 mm
Motor: 0.75 HP / 0.55 kW
Power requirements: 415 volt, 3-phase
Overall dimensions: 360 mm x 700 mm x 1800 mm high
Approximate weight: 150 kg

We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job before purchase.

This pedestal drill is in our warehouse so please feel free to call us on  for more information & price or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or having machinery surplus to requirements, we would appreciate the opportunity to assist in any way we can.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

WALDOWN 8SN PEDESTAL DRILLING MACHINE

We have an Italian-made, excellent used condition,  Centauro Compact 600 CO vertical woodworking bandsaw for sale.

This Italian-made woodworking machine is designed for accurate timber cutting and offers solid cast construction, making it a reliable addition to any cabinet shop, joinery, or school workshop.

Specifications
Throat Size: 580 mm

Maximum Cutting Height: 320 mm (table to blade guide fully raised)

Table Size: 860 mm × 600 mm

Blade Speed: Single speed, suitable for timber cutting

Power Requirements: 3-phase, 415 V

Overall Dimensions: 1.2 m (L) × 0.75 m (W) × 2.1 m (H)

Approximate Weight: 300 kg

We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job before purchase.

This milling machine is in our warehouse so please feel free to call us for more information & price or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or having machinery surplus to requirements, we would appreciate the opportunity to assist in any way we can.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

CENTAURO COMPACT 600 CO VERTICAL WOODWORK BANDSAW

We have a Spiral Milling Attachment for sale 

Key Features of this Unit
Function: It connects directly to the table/work area of a  mill to facilitate the cutting of helical gears, reamers, and spirals by linking the rotation of the indexing head to the tables lead screw feed using a train of change gears.

Distinct Shape: The uniquely contoured mounting base plate (with the multi-slot segment profile visible on the table) and the specialized green-painted tailstock housing are signature traits of Deckel Milling Machine accessories, however there are no markings to determine the machine manufacturer

We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment.

Are you considering selling your machinery?
We buy as well as sell machinery. Downsizing, relocating, closing down, or having surplus equipment. We are always on the lookout for quality machinery to buy. Please do not hesitate to contact us to discuss your machinery needs and how we can help you.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

UNKNOWN SPIRAL

We have an excellent used condition, Mitutoyo 514-105 Vernier Height Gauge for sale.

Reads in metric & imperial, range 0 to 450mm. (0 to 18 inches)

Model 514-105

Please feel free to call us for more information pop in to inspect the boring head at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or have machinery that is surplus to requirements, we would appreciate the opportunity to assist in any way we can.

MITUTOYO MITUTOYO 514-105 VERNIER HEIGHT GAUGE 514-105

Find Engineering - Fabrication For Sale. Browse 176 Engineering - Fabrication listings from Newmac Equipment.

New & Used Engineering - Fabrication For Sale in Australia

Newmac Equipment

Sale Price

HAFCO 40-POSITION MULTIFIX STYLE E5 QUICK CHANGE TOOL POST KIT

MATRIX NO. 37 WORM GRINDING MACHINE

1991 DEVLIEG 3H-48 Spiramatic CNC jigmill

WOODFAST DS 300

WALDOWN 8SN PWD

ENERPAC PAM 1022

SAFEWAY SAFEWAY PHV-160 MECHANICAL/HYDRAULIC MACHINE VICE

SHANGAI Z3032 RADIAL ARM DRILLING MACHINE

WALDOWN 8SN PEDESTAL DRILLING MACHINE

CENTAURO COMPACT 600 CO VERTICAL WOODWORK BANDSAW

UNKNOWN SPIRAL

MITUTOYO MITUTOYO 514-105 VERNIER HEIGHT GAUGE 514-105

Newmac Equipment

Dealer Address