Newmac Equipment

We have for sale a set of  Sahinler IRM 2050/130 Sheet Metal Curving Rolls

Stock #4199

Specifications are as follows

SAE 1050 (CK45) certificated forged steel rolls with high tensile strength
Motorised height adjustment on rear bending roller controlled by push buttons
Heavy cast iron construction at each end frames providing stability and rigidity
Single handle adjustment of bottom rolls to suit material thickness
Safety trip wire  
Brake motor standard for precision bending
Mobile control panel with emergency stop
Conical bending device
Made in Turkey
Date of Manufacture 2011

Features as follows

Curving System Type Initial Pinch
Curving Material Length  2050mm
Curving Plate Thickness  Mild Steel  3mm
Mild steel capacity is rated on hot rolled material with 250MPA
Minimum Rolling Diameter  195mm
Roll Diameter  130mm
Motor Power 3hp
Voltage  415V
Dimensions 3150 x 1050 x 1000mm High
Nett Weight  1525kg
In addition to this machine, our warehouse proudly houses one of the countrys largest inventories of used machinery. We invite you to explore our , where we consistently update our stock, offering a great selection of engineering machinery and equipment for sale.

We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment.

Considering selling your machinery? We buy as well as sell machinery. Downsizing, relocating, closing down, or having surplus equipment. We are always on the lookout for quality machinery to buy. Please do not hesitate to contact us to discuss your machinery needs and how we can help you.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

2011 SAHINLER IRM 2050/130

We have a Woodfast Jointer planer for sale.

Stock #4185

Cutter width 150mm
Table size 1200 x 170mm
415V Three Phase
Dimensions for Transport 1200 x 500 x 960mm High
Weight 100kg


We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job before purchase.

This machine is in our warehouse so please feel free to  pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or having machinery surplus to requirements, we would appreciate the opportunity to assist in any way we can.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

WOODFAST JOINTER PLANER

We have a used, Ex TAFE,  KEECH KP-4 Manual Pan Brake Folder for sale.

This KEECH KP-4 Pan brake is Australian-made and well-constructed, its ideal for workshops looking for reliable, no-fuss performance.

Specifications:
Model: KP-4
Folding Length: 1250 mm
Max mild Steel Capacity: 2.0 mm
Weight: Approx. 300 kg
Construction: Fully welded all-steel body

Features:
Heavy-duty overlocking cams for secure material clamping
Counterweight system for easier operation
Solid plate fingers for a range of folding tasks
Manual operation  no power source needed

We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job before purchase.

This machine is in our warehouse so please feel free to call us for more information or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or having machinery surplus to requirements, we would appreciate the opportunity to assist in any way we can.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance

KEECH ENGINEERING KP-4 MANUAL PAN BRAKE FOLDER

We have a good used condition, Ex TAFE,  MG-432 Mechanical Guillotine for sale

Specifications are as follows
Cutting Capacity: 1250 mm width x 3 mm thickness (mild steel)
Drive System: Mechanical (flywheel-driven)
Motor: 3 kW, 415V three-phase
Stroke Rate: Approximately 33 strokes per minute
Backgauge: Manual wind-out, 635 mm travel, with mechanical counter
Operation: Foot pedal control
Safety Features: Rear guard fitted with a safety micro switch
Weight: Approximately 1200 kg
Dimensions 1100mm high, 1700mm wide, 2100mm front to back with front supports fitted (1450mm removed)

Features
Front sheet supports and material squaring edge
Internally lighted for material viewing
Hinged rear gate with gas strut support for easy access

Weve taken sample cuts on this MG-432 mechanical guillotine, and it performs very well  producing clean, accurate cuts with no noticeable burrs. We always recommend customers visit our warehouse to inspect machines in person. Were more than happy to demonstrate the machine under power, giving you peace of mind that it will suit your application before purchase.

This machine is located in our warehouse and is available for immediate inspection. For more information or pricing, please feel free to contact us or drop in at your convenience.

Looking to Sell Machinery?
We are always seeking quality metalworking machinery and surplus equipment. Whether you are downsizing, relocating, closing down, or simply have equipment thats no longer required, wed welcome the opportunity to discuss how we can assist.

Transport Information
We are happy to provide contact details for reliable freight companies who can deliver machinery anywhere across Australia or internationally. However, please note that neither Newmac Equipment nor the freight providers insure machinery during transit. We strongly recommend arranging transport insurance through your own insurer for peace of mind.

METALMASTER MG-432 MECHANICAL GUILLOTINE

We have a good condition, Ex TAFE, King Sang KSD 16 Pedestal Drill for sale.

Stock # 4197

Specifications are as follows

Table size Diameter 330mm
Distance from the centre of the spindle to the column 195mm
Distance from the table to spindle nose min/max 0  300mm
Morse taper # MT2
Motor Hp/Kw 1HP
Power requirements 415 volt
Overall dimensions 700mm x 330mm x 17300mm high
Weight Approx. 150kgs
Chuck Guard

We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job before purchase.

This pedestal drill is in our warehouse so please feel free to call us for more information & price or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or having machinery surplus to requirements, we would appreciate the opportunity to assist in any way we can.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

KING SANG KSD 16

We have an excellent used condition, Ex school, high quality, Australian made, Woodfast M910 woodworking lathe for sale.

Features
Electronic variable speed
Spindle speed ranges 50-510, 90-910, 170-1740, 290-2900, 390-3890rpm
24 position indexing (see photo)
520mm swing over bed
910mm distance between centres
2MT tailstock & headstock spindle taper

Includes
4 jaw chuck
Live centre
Tool rest

We have run this wood lathe. Its in near new good working condition

We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job before purchase.

This milling machine is in our warehouse so please feel free to call us for more information & price or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or having machinery surplus to requirements, we would appreciate the opportunity to assist in any way we can.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

WOODFAST M910

We have a Sahliner IK 1.2 Manual Swage and Jenny for sale

Specifications are as follows

Heavy duty cast iron construction
Adjustable material side support
Throat Depth 150mm
Mild Steel Capacity 1.2mm
Mild steel capacity is rated on hot rolled material with 250MPA
5 sets of rolls
Made in Turkey

Includes
1 x 4mm wiring rolls
1 x 6mm wiring rolls
1 x 7mm wiring rolls
1 x 9mm wiring rolls
1 x 10mm wiring rolls

In addition to this Swage and Jenny, our warehouse proudly houses one of the countrys largest inventories of used machinery. We invite you to explore our website, where we consistently update our stock, offering a great selection of engineering machinery and equipment for sale.

We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment.

Considering selling your machinery? We buy as well as sell machinery. Downsizing, relocating, closing down, or having surplus equipment. We are always on the lookout for quality machinery to buy. Please do not hesitate to contact us to discuss your machinery needs and how we can help you.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

SAHINLER IK 1.2

We have a Mazak Quick Turn 10 Universal CNC Lathe for sale.

This unit is being sold in non-working condition and is ideal for parts recovery or for buyers capable of performing repairs.

A great opportunity to acquire a machine with quality Mazak components and structure.

Machine Specifications (Typical):
Control: Mazatrol CAM T-2
Swing Over Bed: Approx. 250 mm
Max Turning Diameter: Approx. 200 mm
Max Turning Length: Approx. 300 mm
Chuck Size: 6 inch Hydraulic Chuck
Tool Turret: 8-Station
Spindle Motor: Approx. 7.5 kW
YOM 1985

Condition
Machine is not currently operational
Sold "AS IS" no warranty or returns
Ideal for spare parts or repair projects

Delivery
We can load onto transport
Freight quote available on request

On a gerneral note we recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job before purchase.

This machine is in our warehouse so please feel free to call us for more information & price or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or having machinery surplus to requirements, we would appreciate the opportunity to assist in any way we can.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

MAZAK QUICK TURN 10 UNIVERSAL CNC LATHE

We have an excellent used condition, Mitutoyo 514-105 Vernier Height Gauge for sale.

Reads in metric & imperial, range 0 to 450mm. (0 to 18 inches)

Model 514-105

Please feel free to call us for more information pop in to inspect the boring head at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or have machinery that is surplus to requirements, we would appreciate the opportunity to assist in any way we can.

MITUTOYO MITUTOYO 514-105 VERNIER HEIGHT GAUGE 514-105

We have, in excellent condition, a Hardinge GS200 CNC lathe for sale

Stock # 4106

Specifications are as follows

Control Fanuc Series Oi
Spindle nose A2-6
Max Spindle speed 5000 rpm
Main motor 18.5kw
Max turning dia 284mm
Max turning length  406mm
Hole through Drawtube 52mm
Supply voltage needed 415 volt
Overall dimensions Machine  2.0m x 1.53m x 1.85m high.
Weight of Machine 2.8 tonne
Coolant Tank dimensions 1.7m x 0.55m x 0.5m High  Weight 100kgs
Transformer dimensions 0.55m x 0.45m x 0.53m High  Weight 150kgs
Chip Conveyor dimensions 2.3m x 0.4 m x 1.65m High  Weight 200kgs
Year of Manufacture 2011

Accessories included

200mm 3 Jaw Hydraulic Chuck
Collet chuck takes B60 Index Style  Collets
Tailstock
Chip Conveyor

Features

8 station tool turret
Coolant system
Worklight

We recommend customers visit our warehouse to inspect the machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment. We pride ourselves on providing exceptional customer service and believe that this personalized approach allows us to exceed your expectations.

We welcome any inquiries about the machine and invite you to contact us at

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

Considering selling your machinery?

We are always interested in purchasing metalworking machinery & surplus equipment, if you have one machine or a number of machines you need gone, please feel free contact us here at Newmac Equipment.

HARDINGE GS 200

We have a Ward 2DS Capstan Lathe for sale.

This English-made Ward 2DS capstan lathe, also known as a turret lathe, features a spindle bore of 1½ inches. It offers a spindle speed ranging from 60 to 2040 RPM and is equipped with a carriage which moves along the bed & has front & rear tool posts, typically used for turning, facing & parting off operations. As well as the standard 6-station turret.

Turret lathes are typically used for high-volume, repetitive machining operations where multiple cutting tools are needed in sequence. They feature a rotating turret that holds multiple tools, allowing operators to perform various machining processessuch as turning, drilling, boring, and threadingwithout manually changing tools.

While CNC machines have largely replaced manual turret lathes in modern production, traditional turret lathes are still valuable for smaller volume production runs of second-op work

We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job before purchase.

This milling machine is in our warehouse so please feel free to call for more information & price or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or having machinery surplus to requirements, we would appreciate the opportunity to assist in any way we can.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

WARD WARD 2DS CAPSTAN LATHE

We have a good condition, Ex school, Waldown Workmax MK1 Pedestal Drill for sale.

This Waldown pedestal drilling machine features a 360° tilting table, a rigid steel quill with bearings, a ground steel column, and a 0.5hp single phase motor, making it idea for an industrial workshop or home hobbyist. This model was designed with a baked enamel finish & unlike the later models has a quality steel pully cover.

Specifications are as follows
Table size 240mm x 270mm
Distance from the centre of the spindle to the column 195mm
Distance from the table to spindle nose min/max 0  1260mm
Spindle Speeds 500 to 4,000 RPM
Morse taper # MT2
Motor Hp/Kw 0.5HP/0.37KW
Power requirements 240 volt
Overall dimensions 650mm x 300mm x 1900mm high
Weight Approx. 150kgs

We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job before purchase.

This milling machine is in our warehouse so please feel free to call us for more information or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or having machinery surplus to requirements, we would appreciate the opportunity to assist in any way we can.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

WALDOWN WORKMAX MK1 PEDESTAL DRILL

Find Engineering - Fabrication For Sale. Browse 174 Engineering - Fabrication listings from Newmac Equipment.

New & Used Engineering - Fabrication For Sale in Australia

Newmac Equipment

Sale Price

2011 SAHINLER IRM 2050/130

WOODFAST JOINTER PLANER

KEECH ENGINEERING KP-4 MANUAL PAN BRAKE FOLDER

METALMASTER MG-432 MECHANICAL GUILLOTINE

KING SANG KSD 16

WOODFAST M910

SAHINLER IK 1.2

MAZAK QUICK TURN 10 UNIVERSAL CNC LATHE

MITUTOYO MITUTOYO 514-105 VERNIER HEIGHT GAUGE 514-105

HARDINGE GS 200

WARD WARD 2DS CAPSTAN LATHE

WALDOWN WORKMAX MK1 PEDESTAL DRILL

Newmac Equipment

Dealer Address