Newmac Equipment

We have in used condition a Chalmers & Corner Manual Box Pan Folder for sale

Bending Length 930mm
Mild Steel Capacity 1.0mm
Manual Operation
Dimensions for Transport 1320 x 530 x 1300mm (L x W x H)
Weight 100kg
Please click here for printable pdf & price (opens in new tab)
Comes Complete With
Full Set of Tooling

For more information & price please pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment, if you have one machine or a quantity of machines you need to sell, please feel free contact us here at Newmac Equipment

We would like to extend a note to all prospective customers. We are happy to provide freight quotes for machines to be shipped anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

CHALMERS & CORNER BOX PAN FOLDER

We have a Japanese made, Kiriu Kikai LS 3 turret lathe  for sale.

Specifications
-Swing over the bed 450mm
-Swing over the saddle 385mm
-Swing over the cross slide 210mm
-Max. machining length 200mm
-Spindle speeds 85 to 2200 rpm
-Spindle bore 52mm

Comes with
-Barfeed (see photo)
-Collet system with pads (see photo)

We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job prior to purchase.

This centre lathe is in our warehouse so please feel free to call us for more information or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or have machinery that is surplus to requirements, we would appreciate the opportunity to assist in any way we can.

KIRIU KIKAI LS 3 TURRET LATHE

We have a good working condition Promecam GTH 425 Hydraulic Guillotine for sale

Specifications are as follows
Capacity 2.5m x 4mm
Machine Voltage 415 volt
Dimensions for Transport 3m x 1.9m x 1.7m high
Weight Approx. 5 tons
Please click here for a printable pdf report & price (opens in new tab)

We have had this guillotine running & all works well

This guillotine is in our warehouse so please feel free to contact us or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery, if you have machines surplus to requirements or you are closing down, please feel free to contact us here at Newmac Equipment.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

PROMECAM GTH 425 HYDRAULIC GUILLOTINE

We have an excellent used condition Ecoca EL 5110 CNC teach lathe for sale.

Specification are as follows:

Swing over the bed 510mm
Swing over the cross slide 305mm
Distance between centres 1000mm
Spindle nose D1-8
Spindle bore 80mm
Spindle speeds 20 to 2000 rpm
15HP Main spindle motor
Year of manufacture 1985
Comes with the following accessories:

3 Jaw chuck
4 position tool post
Mitsubishi Meldas 520A  CNC control

This machine is in our warehouse ready for inspection under power.

ECOCA EL 5110

We have a Omes MEC 350 Cold Saw for sale

Good working condition

Specifications
Max cutting size round at 90° with new blade 115mm
Power requirements three phase 415V

Features
Quick action vice
Mitering cutting left & right
Coolant system
3 speed motor

Please feel free to inspect machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment.

Considering selling your machinery? We buy as well as sell machinery. Downsizing, relocating, closing down, or having surplus equipment. We are always on the lookout for quality machinery to buy. Please do not hesitate to contact us to discuss your machinery needs and how we can help you.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

OMES MEC 350 COLD SAW

We have a Spark EDM Tap Disintegrator for sale.

Previously owned by the CSIRO it includes all the accessories, as seen in the accompanying photos. 

Visit our warehouse and see our machinery in action! Well be happy to give you a test run so you can make an informed decision and feel confident in your investment. Our exceptional customer service and personalized approach will ensure your satisfaction. Reach out if you have any questions  were here to help!

We welcome any inquiries about the machine and invite you to contact us at

If you are considering selling your used machinery due to downsizing, relocating, closing down, or having surplus equipment, we would be pleased to assist you. We are always on the lookout for quality machinery to buy and can offer you a fair price for your equipment. Our team of experts will work with you to ensure a smooth and hassle-free process, taking care of everything from inspection to transportation. We are committed to providing our customers with exceptional service and value transparency and honesty in all of our dealings. Please do not hesitate to contact us to discuss your machinery needs and how we can help you. We look forward to hearing from you.

We would like to extend a note to all prospective customers regarding the transport of machinery. We are happy to provide freight quotes for machines to be shipped anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance to ensure the safe and secure delivery of their equipment. Our team is committed to providing exceptional customer service, and we want to ensure that our customers are fully informed about the potential risks involved with transporting machinery. Please do not hesitate to contact us if you have any questions or concerns about shipping machinery. Thank you for considering our products, and we look forward to the opportunity to serve you.

UNKNOWN SPARK EDM TAP DISINTEGRATOR

We have Whacheon WL-435 Centre lathe for sale.

On special price reduced to $6500+GST

Whacheon also spelt Hwacheon are a quality South Korean lathe manufacture.

Specifications are as follows

Swing Over Bed 435mm
Swing Over Saddle 240mm
Distance between centres 850mm
Spindle bore 52mm
Spindle speeds 32 to 1800 rpm
Spindle mount Camlock D1-6
Machine voltage 415, 3 phase
Main motor 5HP
Year of manufacture 1986
Accessories with machine are as follows

250mm Bison 3 jaw chuck, with two sets of hard jaws
355mm 4 jaw chuck
40 position quick change tool post
Fixed steady
Thread chasing dial
Coolant system
Work light
2 axis digital read out
Features

Foot brake
Chuck guard
Non gap bed
For customers who wish to pay us a visit, we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job prior to purchase.

This centre lathe is in our warehouse so please feel free to call us for more information & price or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment, if you have one machine or a quantity of machines you need gone, please feel free contact us here at Newmac Equipment

WHACHEON WL-435 CENTRE LATHE

We have a Russian 2H125 geared head pedestal drilling machine for sale.

Specifications are as follows
Working area of the table 450mm x 400mm
Max drilling capacity in mild steel 32mm
Spindle taper MT3
Spindle speeds 45 to 2000 rpm
Power requirements 3 phase 415 volt
Overall dimensions 750mm x 1000mm x 2200mm high
Weight approx 1 ton

Features
Automatic feed & tapping capabilities

For customers who wish to pay us a visit, we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job prior to purchase.

This geared head drill is in our warehouse so please feel free to call us on for more information & price or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or have machinery that is surplus to requirements, we would appreciate the opportunity to assist in any way we can.

STANKOIMPORT 2H125 GEARED HEAD PEDESTAL DRILLING MACHINE

We have a Mizoguchi MU-S-4 universal facing & boring head for sale.

Specifications are as follows

Model MU-S-4F
NT40 Shank
Made in Japan
Head Dia 100mm
Boring Bar Dia holes 22mm
Hole Centre Distance 27mm
Boring ranges up to 500mm Dia
0.0005 Increments
Fully functional & in excellent used condition

This universal facing and boring head is in our warehouse so feel free to pop in to inspect it at your convenience or give us for more information.

We are always interested in purchasing metalworking machinery, if you have machines surplus to requirements or you are closing down, please feel free to contact us here at Newmac Equipment

MIZOGUCHI MU-S-4 UNIVERSAL FACING & BORING HEAD

We have a Frederick Pollard Corona Geared Head Drill for sale

Stock #3293

Specifications are as follows:

Table size 600 x 470mm Dia
Max drill size in mild steel 40mm
Distance from spindle to column 325mm
Spindle taper morse taper 4
Quill travel 250mm
Machine voltage, three phase 415 volt
5hp Spindle Motor
Overall dimensions 1450mm x 1160mm x 2700mm high
Weight 2 Tonne approx

We have run this machine & all works well.

We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job prior to purchase.

This drilling machine is in our warehouse so please feel free to call us for more information & price or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or having machinery that is surplus to requirements, we would appreciate the opportunity to assist in any way we can.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

FREDERICK POLLARD CORONA

We have for sale an Arboga Radial Arm Drilling Machine

Stock # 3979

This versatile and robust machine is designed for precision drilling, making it ideal for a variety of industrial and manufacturing applications. With its radial arm design, the machine can easily drill at various positions, providing greater flexibility and accuracy. If you are in the market for a high-quality radial arm drilling machine, this Arboga Radial Arm Drillcould be an excellent fit. Please read on for further details regarding its features and specifications.

Specifications are as follows

Max drilling diameter in mild steel 20mm
Table Size Dia 500mm
Distance from centre of the spindle to the column, max 620mm
Distance from  table to spindle nose, max 150mm
Distance from baseplate to spindle nose, max 740mm
Spindle taper morse taper 4
Quill travel 175mm
8 spindle speeds 80 to 8900 RPM
Overall dimensions 910mm x 600mm x 1650mm high
Net weight 800kgs

Testing of Machinery  Try Before You Buy

We are happy to test-run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job prior to purchase.

This machine is in our warehouse so feel free to pop in to inspect the machine at your convenience or give us a ring for more information.

Thinking of selling your used or surplus equipment? Looking at Downsizing, Relocating, Closing Down or have machinery that is surplus to requirements. We are always looking for machinery to buy, so would appreciate the opportunity to assist in any way we can.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

ARBOGA NOT AVAILABLE

We have a good working order Brobo Super 12'' Coldsaw for sale

Comes with/Features

Quick action vice
Mitering locking device stops at 45° left, Straight & 45° right
Coolant system
Single speed motor
Motor 1.5hp
Motor three phase 415V

Click here for a printable pdf & price

We have run this Brobo coldsaw, all works well & cuts square. The coldsaw is in our warehouse so please feel free to pop in to inspect the machine at your convenience.

A note to all prospective customers. We are happy to get freight quotes anywhere in Australia or worldwide. If the sale of any machine goes ahead, please note the machines are not insured during transport by either the transport companies or Newmac Equipment. It is advised customers talk to their usual insurance company to take out transport insurance.

We are always interested in purchasing metalworking machinery, if you have machines surplus to requirements or you are closing down, please feel free to contact us here at Newmac Equipment.

BROBO SUPER 12''

Find Engineering - Fabrication For Sale. Browse 195 Engineering - Fabrication listings from Newmac Equipment.

New & Used Engineering - Fabrication For Sale in Australia

Newmac Equipment

Sale Price

CHALMERS & CORNER BOX PAN FOLDER

KIRIU KIKAI LS 3 TURRET LATHE

PROMECAM GTH 425 HYDRAULIC GUILLOTINE

ECOCA EL 5110

OMES MEC 350 COLD SAW

UNKNOWN SPARK EDM TAP DISINTEGRATOR

WHACHEON WL-435 CENTRE LATHE

STANKOIMPORT 2H125 GEARED HEAD PEDESTAL DRILLING MACHINE

MIZOGUCHI MU-S-4 UNIVERSAL FACING & BORING HEAD

FREDERICK POLLARD CORONA

ARBOGA NOT AVAILABLE

BROBO SUPER 12''

Newmac Equipment

Dealer Address