Newmac Equipment

We have a large quantity of used BT50 tooling for sale. Price $200+GST Each Price reduced for quick sale $100+GST Each

UNKNOWN BT50 TOOLING

We have a Iemca TS 560 61 P Magazine Barfeeder for sale.
Now on sale, price reduced from $5000+GST to $2500+GST

General Specifications

Max Bar Capacity 70mm
Magazine load 10-70mm Bar
Chain Feed with drive motor
6m Bar Length
Overall dimensions 8,300mmm x 700mm x 1,800mm high
Weight appox 1,500kgs
This Iemca Magazine Barfeeder is in our warehouse so please feel free to call us on  for more information & price or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment, if you have one machine or a quantity of machines you want to sell, please feel free to give us a ring.

IEMCA TS 560/61/P

We have a Repco Power S6A surface grinder for sale

Specifications are as follows

Magnetic chuck size 600mm x 300mm, which has good hold down power
Max grinding wheel Ø, not know but has clearance in the guard for Ø450mm, current grinding wheel appox. Ø350mm
Max workpiece hight under the wheel, depends on grinding wheel Ø, current wheel would accommodate 290mm
Travels accomodate passing over full length & width of the magnetic chuck
Can be used in manual mode & automatic mode with cross feed
Power requirements 3 phase 415 volt
Overall dimensions for transport 2.5m x 1.8m x 2.5m high
Weight approx. 3 tons

Comes with

Coolant system
Manual magnetic chuck

Features

Power rise & fall on the grinding wheel head

For customers who wish to pay us a visit, we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job prior to purchase.

Please feel free to call us for more information & price or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or have machinery that is surplus to requirements, we would appreciate the opportunity to assist in any way we can.

REPCO POWER S6A AUTOMATIC SURFACE GRINDING MACHINE

We have in good used Condition a Strands S68 Geared Head Drill for sale

Stock # 3986

Specifications are as follows

Table size 500 x 350mm
Max Drill Size in Mild Steel 20mm
Distance from the centre of the spindle to the column 250mm
Distance from table to spindle nose, table fully down & head fully up 600mm
8 Spindle Speeds 100 to 2900rpm
Spindle taper Morse 3
Quill travel 140mm
Spindle Motor 1.1kw
Power requirements 415 volt
Dimensions for Transport 500 x 550 x 1,700mm (High)
Weight Approx. 200kgs

 We have run this geared head drill and all works well.

We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job prior to purchase.

This drilling machine is in our warehouse so please feel free to call us for more information & price or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or having machinery that is surplus to requirements, we would appreciate the opportunity to assist in any way we can.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

STRANDS S68

We have a very good used condition, Sunderland model 27SDH gear planner for sale

Specification & info as follows:

The machine is very well equipped 
1. One head/slide for cutting Spur/single helical gears  max face width 380mm (15) / max pitch 1 DP (25 Mod)
a. For single helical gears the max. helical angle is + or  30 deg.
2. One head/slide for double helical gears  max face width 380mm (15) / max pitch 1.5 DP ( 16 Mod) / helical angle 30 deg.
3. Two cutter heads  single acting and double acting
4. Rim/work steady rests for cutting large diameter gears
5. Change gears  full set (approx. 60 gears)
6. Speed gears (for different cutting speeds)  5 sets
7. Cutting trips  5 or 6 for different length faces (up to 15 face)
8. 4 and 6 work arbours with bushes for outer work support
9. Operation manual and work charts (for spurs/helicals and double helical gears)

Machine serial number: BB471  it was built in the mid 1960s 

Please note this machine is not in our warehouse, but we are happy to arrange an appointment for inspection of the machine if required.

Please feel free to call us for more information

We are always interested in purchasing metalworking machinery & surplus equipment, if you have one machine or a quantity of machines you need gone, please feel free contact us here at Newmac Equipment.

SUNDERLAND NO.27 GEAR PLANNER

We are pleased to offer a used, Jones & Shipman 1300  Universal Cylindrical Grinder for sale.

Stock #3970

Jones & Shipman was a UK based company that  manufactured grinding machines for more than a century. Jones & Shipman produced a wide range of grinding machines, including cylindrical, surface, and tool grinders, which are known for their robust construction, precision, and reliability. Jones & Shipman grinders are highly regarded in the manufacturing industry for their quality, durability, and exceptional performance. Dont miss the opportunity to own this cylindrical grinder at an affordable price. Contact us today to learn more about this product.

Specifications are as follows

254mm swing
686mm between centres
Comes with

Coolant system
Internal grinding attachment
Work steady
DRO

This  cylindrical grinder is in our warehouse, please feel free to call us on  for more information or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery, if you have machines surplus to requirements or you are closing down, please feel free to contact us here at Newmac Equipment

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

JONES & SHIPMAN 1300

We have for sale a WMW Hydraulic Surface Grinder

Stock # 3965

Despite being a used machine its in good usable condition, ensuring that it can meet most grinding requirements. This machines robust construction makes it a valuable addition to any machining workshop. 

Specifications are as follows

Table size 760mm x 150mm
Magnetic chuck size 460mm x 205mm
Max grinding wheel dia. 200mm
Power requirements, 3 phase 415 volt
Overall dimensions 1800mm x 1400mm x 1950 mm high
Weight 1.5 Tonne

This surface grinder is in our warehouse so please feel free to contact us or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery, if you have machines surplus to requirements or you are closing down, please feel free to contact us here at Newmac Equipment.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

WMW WMW 760 X 150

We have a Leyland Gifford pedestal drilling machine for sale.

Specifications are as follows

Working area of the table 590mm x 525mm
Distance from the Column to the centre of the spindle 250mm
Spindle taper MT2
Spindle speeds 75 to 1500 rpm
Weight approx 750kgs
Overall dimensions 770mm x 1100mm x 2400mm high
Drill is in working condition but auto feeds are inoperable

For customers who wish to pay us a visit, we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job prior to purchase.

This geared head drill is in our warehouse so please feel free to call us for more information & price or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or have machinery that is surplus to requirements, we would appreciate the opportunity to assist in any way we can.

LEYLAND GIFFORD PEDESTAL DRILL

We have a Zayer 55BM Universal Milling Machine for sale.

We have run this machine & all works well

Specifications are as follows
Table size 1.7m x 0.7m
XYZ travel 1.32m x 1.016m x 0.56m
Spindle Speeds 24 to 1685 rpm
Spindle taper NT50
Motor Hp/Kw 20.75/15.5
Machine Voltage 415 volt
Dimensions for Transport 1.9m x 2.3m x 2.1m high
Weight 6.2 tons

Accessories
Fagor 3 axis digital read out

In addition to this milling machine, our warehouse proudly houses one of the largest inventories of used machinery in the country. We invite you to explore our website, where we consistently update our stock, offering a great selection of engineering machinery and equipment for sale.

Please feel free to inspect machinery in person. Our team is more than happy to offer to test run the equipment to give you the peace of mind that it will perform to your requirements before making a purchase. That way, you can make an informed decision and feel confident in your investment.

Considering selling your machinery? We buy as well as sell machinery. Downsizing, relocating, closing down, or having surplus equipment. We are always on the lookout for quality machinery to buy. Please do not hesitate to contact us to discuss your machinery needs and how we can help you.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

ZAYER 55BM UNIVERSAL MILLING MACHINE

We are excited to offer an excellent re-conditioned Waldown 8SN Series III Pedestal Drill for sale. which is proudly Australian-made.

This top-quality machine is a testament to the quality craftsmanship that Australia is known for and is ideal for use in manufacturing, workshops, or home applications. Dont miss out on this rare opportunity to acquire a top-quality drill that has been expertly reconditioned.

 

Specifications are as follows:

Table size 240 x 275mm
Max drill size in mild steel 13mm
Distance from spindle to column 200mm
Spindle taper morse taper 2
Quill travel 90mm
Spindle Motor 0.5hp
Machine voltage, single phase 240 volt
Overall dimensions 600mm x 360mm x 1800mm high
Weight 200kg approx

We have run this machine & all works well.

We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job prior to purchase.

This drilling machine is in our warehouse so please feel free to call us for more information & price or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or having machinery that is surplus to requirements, we would appreciate the opportunity to assist in any way we can.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

The slide show below can be paused by hovering the mouse cursor over the current photo. It will resume when the cursor is moved off the photo.

WALDOWN 8SN SERIES III

We have in  good condition a range of Mitutoyo Internal Micrometers

The following sizes are available priced from $50.00 each

50-75mm
100-125mm
125-150mm
150-175mm
175-200mm
200-225mm
225-250mm
250-275mm
275-300mm
300-325mm
325-350mm (Japanese NSK Brand)
350-375mm
425-450mm
450-475mm
475-500mm
500-525mm
525-550mm
600-625mm
625-650mm
These Mitutoyo Micrometers are in our warehouse so feel free to pop in to inspect them at your convenience.

We are always interested in purchasing metalworking machinery, if you have machines surplus to requirements or you are closing down, please feel free to contact us here at Newmac Equipment

MITUTOYO MITUTOYO

We have a Yunnan CY S1760G Centre Lathe for sale

Specifications are as follows
Swing Over Bed 410mm
Swing Over Saddle 230mm
Swing in Gap Approx 640mm
Distance Btw Ctrs 1.5m
Spindle Bore 58mm
Spindle mount Camlock D1-6
Spindle Speeds 20 to 2000 rpm
Power requirements 3 phase, 415 volt
Overall dimensions 2.7m x 1.05m x 1.6m high
Approx. weight 2 tons
The lathe features an imperial lead screw, but the dials have both metric & imperial divisions

Accessories
3 & 4 Jaw chuck
Dog plate for turning between centres
Jenix 2 axis digital read out (tested & working)
Quick change tool post
Fixed Steady
Travelling Steady
Thread Chasing Dial
Foot Brake Pedal tested & working
Coolant System, can be heard running

We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job before purchase.

This milling machine is in our warehouse so please feel free to call us for more information & price or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or having machinery surplus to requirements, we would appreciate the opportunity to assist in any way we can.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

YUNNAN CY S1760G CENTRE LATHE

Find Engineering - Fabrication For Sale. Browse 178 Engineering - Fabrication listings from Newmac Equipment.

New & Used Engineering - Fabrication For Sale in Australia

Newmac Equipment

Sale Price

UNKNOWN BT50 TOOLING

IEMCA TS 560/61/P

REPCO POWER S6A AUTOMATIC SURFACE GRINDING MACHINE

STRANDS S68

SUNDERLAND NO.27 GEAR PLANNER

JONES & SHIPMAN 1300

WMW WMW 760 X 150

LEYLAND GIFFORD PEDESTAL DRILL

ZAYER 55BM UNIVERSAL MILLING MACHINE

WALDOWN 8SN SERIES III

MITUTOYO MITUTOYO

YUNNAN CY S1760G CENTRE LATHE

Newmac Equipment

Dealer Address